Stock Wire looms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 08-19-2004, 01:36 AM

Where would you bolt up the stock wire looms ( for the back of the block )for a 68 1/2 ton?

Thanks

GMC AMI · 08-19-2004, 05:23 AM

Quote:

Originally Posted by skokie

Where would you bolt up the stock wire looms ( for the back of the block )for a 68 1/2 ton?

Thanks

Brad, your block is not a 68 and that is why the holes are not in your block
for the wire looms. You might have to be happy using the other 4, top ones
intake bolts, two small front that mount under heat shield mount bolts. Mike

skokie · 08-19-2004, 02:38 PM

Well that just figures

Mike what heat shield are you referring to?

Thanks
Brad

Dean · 08-19-2004, 03:24 PM

note to self......take pics for Brad tonight!! I think my memory is going......

skokie · 08-19-2004, 03:35 PM

HAHAH its cool Dean. I have a 2 yr old sone and a 6 month old girl and my memory left a long time ago

Definately get some of the area where the rear looms bolt into the block.
Thanks

GMC AMI · 08-19-2004, 07:26 PM

Hey Brad, here are your PICS, Mike
The tall shiny bolt is where the rear small loom mount on a 68. I do not know if your
block has this hole from the factory or not, only your shadow knows for sure!

skokie · 08-20-2004, 10:59 PM

Ok I found where they bolt up. The bolt hoes were covered in dirt thats why I couldnt see them or feel them. Do the open ends face the firewall or vice versa?

Thanks

skokie · 08-20-2004, 11:34 PM

Ok forget that last post I found a pic in the assembly manual. Openings face the firewall.

08-19-2004, 01:36 AM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Stock Wire looms Where would you bolt up the stock wire looms ( for the back of the block )for a 68 1/2 ton? Thanks

08-19-2004, 07:26 PM	#6
GMC AMI Registered User Join Date: Apr 2004 Location: The Other Maine! Posts: 2,236	More loom shots! Hey Brad, here are your PICS, Mike The tall shiny bolt is where the rear small loom mount on a 68. I do not know if your block has this hole from the factory or not, only your shadow knows for sure! Attached Images __________________ 1968 Chevy 4x4 307 4 speed Last edited by GMC AMI; 08-19-2004 at 07:30 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-19-2004, 02:38 PM	#3
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Well that just figures Mike what heat shield are you referring to? Thanks Brad

08-19-2004, 03:24 PM	#4
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	note to self......take pics for Brad tonight!! I think my memory is going......

08-19-2004, 03:35 PM	#5
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	HAHAH its cool Dean. I have a 2 yr old sone and a 6 month old girl and my memory left a long time ago Definately get some of the area where the rear looms bolt into the block. Thanks

08-20-2004, 10:59 PM	#7
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Ok I found where they bolt up. The bolt hoes were covered in dirt thats why I couldnt see them or feel them. Do the open ends face the firewall or vice versa? Thanks

08-20-2004, 11:34 PM	#8
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,342	Ok forget that last post I found a pic in the assembly manual. Openings face the firewall.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.