What about this one 4 sale?? Your Opinion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidh · 08-25-2004, 02:30 PM

: I found a 67'C10, only 73K, little rust on the rockers, 250 straight 6, recent clutch. The bad part is this thing was all original and the guy bought it a few months ago, went a stripped most of the paint with some airplane stripper and rattle can primerd so it looks bad now. Then, he put a 2 dial radio in it and some thief tried to pry it out and Mangled the dash and ashtray

!!
This truck was really clean and the paint was just faded 5mos. ago. He's asking $1000 for it but I think I can get it for $800 or so. It drives fairly well and the 3 on the tree shifts nice.
How do I cut out another entire dash? Or should I just cut it at the dash pad meeting point? How do the sides and bottom come out?

Jeremy_5 · 08-25-2004, 03:09 PM

Someone else will know better then me, but I know it will be a chore getting the entire dash out, as it is welded in at a few places. Doesn't sound like a bad buy, its hard to tell without pictures but for $800 it doesn't sound bad.

cdowns · 08-25-2004, 04:02 PM

is it long or short?? as for the dash there's a couple of screws on each side then you can cut accross under where the dash pad is and it'll slip right out.
for around here anything that runs shifts and stops would be considered a deal at less than a grand

mocwon · 08-25-2004, 05:22 PM

I believe I saw where Brother's sells a patch panel for mangled radio holes.

davidh · 08-25-2004, 06:57 PM

undefined THE 67 IS A C10 LONG BED. I LOOKED AT THIS TRUCK WAS A NICE ORIGIANAL UNTIL IT WAS SANDED, STRIPPED OF ITS PAINT AND RATTLE CANNED PRIMERD

. THE 3SPEED COLUMNSHIFT IS VERY TIGHT, AND THE STEERING IS QUITE RESPONSIVE I JUST WISH IT WAS IN ITS UNALTERD STATE AS BEFORE. I'D GAVE $1200 FOR IT BACK THEN.

Blue Beard · 08-25-2004, 11:20 PM

Sounds good, how about some pics...?

davidh · 08-26-2004, 05:19 PM

I don't have a digital camera just yet but I will say it does have the stock white dog dish hub caps

08-25-2004, 02:30 PM	#1
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	What about this one 4 sale?? Your Opinion : I found a 67'C10, only 73K, little rust on the rockers, 250 straight 6, recent clutch. The bad part is this thing was all original and the guy bought it a few months ago, went a stripped most of the paint with some airplane stripper and rattle can primerd so it looks bad now. Then, he put a 2 dial radio in it and some thief tried to pry it out and Mangled the dash and ashtray !! This truck was really clean and the paint was just faded 5mos. ago. He's asking $1000 for it but I think I can get it for $800 or so. It drives fairly well and the 3 on the tree shifts nice. How do I cut out another entire dash? Or should I just cut it at the dash pad meeting point? How do the sides and bottom come out?

08-25-2004, 03:09 PM	#2
Jeremy_5 Truck addict Join Date: Sep 2003 Location: Lincoln, California Posts: 497	Someone else will know better then me, but I know it will be a chore getting the entire dash out, as it is welded in at a few places. Doesn't sound like a bad buy, its hard to tell without pictures but for $800 it doesn't sound bad. __________________ 1956 Chevy Napco 1972 Cheyenne Super 1970 K20

08-25-2004, 04:02 PM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	is it long or short?? as for the dash there's a couple of screws on each side then you can cut accross under where the dash pad is and it'll slip right out. for around here anything that runs shifts and stops would be considered a deal at less than a grand __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

08-25-2004, 05:22 PM	#4
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	I believe I saw where Brother's sells a patch panel for mangled radio holes. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

08-25-2004, 06:57 PM	#5
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	67 undefined THE 67 IS A C10 LONG BED. I LOOKED AT THIS TRUCK WAS A NICE ORIGIANAL UNTIL IT WAS SANDED, STRIPPED OF ITS PAINT AND RATTLE CANNED PRIMERD . THE 3SPEED COLUMNSHIFT IS VERY TIGHT, AND THE STEERING IS QUITE RESPONSIVE I JUST WISH IT WAS IN ITS UNALTERD STATE AS BEFORE. I'D GAVE $1200 FOR IT BACK THEN.

08-25-2004, 11:20 PM	#6
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,831	Sounds good, how about some pics...? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

08-26-2004, 05:19 PM	#7
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,220	I don't have a digital camera just yet but I will say it does have the stock white dog dish hub caps

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.