|
09-14-2004, 02:42 PM
|
#1 |
|
Registered User
Join Date: Jul 2004
Location: conneaut ohio
Posts: 10
|
clutch disc/305V6
i can't find a new clutch disc for my 68 305 v6 4 speed. none of the parts stores or clutch sites list a 305 v6 engine. does anyone have a cross reference no?
|
|
|
|
09-14-2004, 04:58 PM
|
#2 |
|
WILLY FOR PRESIDENT!!
Join Date: Feb 2004
Location: Wichita, Kansas
Posts: 190
|
You might check Kantor. I know that they have a engine rebuild kit, but I don't know for sure if they have clutches. I believe its board member erl thats really into the 305 V6's, so you might check with him.
Stanford
__________________
"He's a high tech REDNECK." George Jones '67 C/10 FOR SALE!! $600, runs, strait grill, good parts, or beater truck '68 GMC K25, 4x4, current project '71 Custom/10, Crate 350, My Baby!! '97 Pontiac Grand Prix GTP |
|
|
|
|
09-14-2004, 08:44 PM
|
#3 |
|
huh?
 
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,690
|
http://www.6066gmctrucks.org/
You should go to that site and ask around, they're big V6 guys. Best of luck.
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
|
|
|
|
09-14-2004, 11:37 PM
|
#4 |
|
Sisyphus was my mentor!
Join Date: Sep 2002
Location: Carleton Place, Ontario CANADA
Posts: 984
|
I'd suggest you goto a real clutch shop. I took a local place my flywheel, my friction plate, my pressure plate & my throwout bearing. they guy looked at it & knew what was needed. The guy ground my flywheel to give it a fresh place for the new disc to break-in on. they upgraded me to a 12" disc for an aditional 15 bucks for a total of 175CDN. Just my opinion but a place that only did clutches knew their chit really well.
__________________
passthebuck  #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car |
|
|
|
|
09-15-2004, 07:54 AM
|
#5 |
|
Registered User
Join Date: Apr 2000
Location: Leesburg, GA
Posts: 746
|
I found a disc on AutoZone's website. I had to say you had a 3/4 ton 68 to get the 305V6 engine option to show up. The disc is made by Value Craft (#CP34) and runs $50.99. It is a special order item. I tried Advance and NAPA but the partsamerica website must be down right now. I also found this link to complete clutch kits for the 305V6 http://www.clutchplace.com/Store/pro...edAutoID=19681 I looked on Hollander and it shows that a 10 1/2" and 11" clutch were available so you may want to verify the size you have before ordering.
__________________
FOUNDING MEMBER OF THE DRUM BRAKE CLUB Second Owner 70 C-10 Second Owner 93 GMC C1500 Third Owner 99 C2500 Crew Cab Short Bed |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
