17 inch Torq Thrust 6's for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

f.monroe · 09-25-2004, 01:48 AM

I have a set of Torq Thrust 6's for sale .Fronts are 17x8 ,rears 17x9.5. They have BF Goodrich Comp TA's on them .255/60 front and 275/60 rear. They are 5.5backspace front and 6.5 backspace rear. Tires are nice .One rear wheel has a small blemish on the lip. I bought them to use on my 1998 light 3/4 ton that is 6 lug but the backspace is too much for my truck and I do not want to run spacers. They are a direct bolt on for 1999 and up trucks and suv's. If you know of anyone looking for a set let me know. I can email pics. I dont know what it would cost to ship these but I will if needed. I am in Bryan,Tx. $800 takes them. They are 6lug wheels. Frank
email frankm@tconline.net

67chev · 09-25-2004, 03:05 AM

Sounds like a good deal...wish I knew how they would fit on a 68!!! That would be perfect, and just what I am looking for.

Custom 68 · 09-25-2004, 03:53 AM

That is just what I am looking for but too far away.
Good luck
Dave

f.monroe · 09-25-2004, 04:17 AM

I do not know how they would look or if the backspacing would be too much. They sell billet spacers/adapters on ebay for $135 in various widths from 1.25 to 2 inches.The wheels are hubcentric and I do not know if the older trucks are the same as newer ones.They would definitely fit with adapters but I use my truck to pull a 7000 lb tractor and other things so I am a little scared to use them. I think the cheapest way to ship something like this is Forward Air. The only problem is that you have to have a terminal near you . It is probably only $75 through them to Springfield.
Frank

67chev · 09-25-2004, 04:37 AM

Frank, please email pics to timandmariela@cablemt.net I would like to see them, and I will ask around to see if they will fit. If so, we can discuss shipping...I work right next to the airport (Spokane Intl). Pics of tires too, if you could. Thanks in advance!

Tim

castillo430 · 09-25-2004, 04:40 AM

Are the wheels five or six hole

f.monroe · 09-25-2004, 04:44 AM

They are TT6's which are a 6 spoke torq thrust that is 6 lug application. Bolt pattern is 6 on 5.5inch. Hard to find wheels. I bought them without asking about the backspace and they are wrong for my truck. I have been lookinf for a set of wheels to mount the tires on but havent found anything so I am going to sell them with the tires.

OldSkool71 · 09-26-2004, 12:12 AM

intersted would like to see pics of rims and damage. Also what condition tires are in as far a mileage and wear. Let me and put me in line please. And are they the polished or grey finish?

thanks, Ron

f.monroe · 09-26-2004, 12:49 AM

Rims are polished and tires are nice. I bought them so I do not know what the mileage is but they have a lot of tread. I am going to try to post pics but if you want pics emailed leave your email address. I have not been able to post these so if someone out there knows how to post the pics ,I can email them to you and you can post them for me .I would appreciate that.
Frank

09-25-2004, 01:48 AM	#1
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	17 inch Torq Thrust 6's for sale I have a set of Torq Thrust 6's for sale .Fronts are 17x8 ,rears 17x9.5. They have BF Goodrich Comp TA's on them .255/60 front and 275/60 rear. They are 5.5backspace front and 6.5 backspace rear. Tires are nice .One rear wheel has a small blemish on the lip. I bought them to use on my 1998 light 3/4 ton that is 6 lug but the backspace is too much for my truck and I do not want to run spacers. They are a direct bolt on for 1999 and up trucks and suv's. If you know of anyone looking for a set let me know. I can email pics. I dont know what it would cost to ship these but I will if needed. I am in Bryan,Tx. $800 takes them. They are 6lug wheels. Frank email frankm@tconline.net

09-25-2004, 03:05 AM	#2
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	Sounds like a good deal...wish I knew how they would fit on a 68!!! That would be perfect, and just what I am looking for. __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

09-25-2004, 03:53 AM	#3
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,939	That is just what I am looking for but too far away. Good luck Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

09-25-2004, 04:37 AM	#5
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	Frank, please email pics to timandmariela@cablemt.net I would like to see them, and I will ask around to see if they will fit. If so, we can discuss shipping...I work right next to the airport (Spokane Intl). Pics of tires too, if you could. Thanks in advance! Tim __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

09-26-2004, 12:12 AM	#8
OldSkool71 C/10 CLUB MEMBER Join Date: Jul 2003 Location: Lakewood, CA Posts: 993	intersted would like to see pics of rims and damage. Also what condition tires are in as far a mileage and wear. Let me and put me in line please. And are they the polished or grey finish? thanks, Ron __________________ -Ron-

09-25-2004, 04:17 AM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	I do not know how they would look or if the backspacing would be too much. They sell billet spacers/adapters on ebay for $135 in various widths from 1.25 to 2 inches.The wheels are hubcentric and I do not know if the older trucks are the same as newer ones.They would definitely fit with adapters but I use my truck to pull a 7000 lb tractor and other things so I am a little scared to use them. I think the cheapest way to ship something like this is Forward Air. The only problem is that you have to have a terminal near you . It is probably only $75 through them to Springfield. Frank

09-25-2004, 04:40 AM	#6
castillo430 Registered User Join Date: Sep 2004 Location: seguin,tx Posts: 38	Are the wheels five or six hole

09-25-2004, 04:44 AM	#7
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	They are TT6's which are a 6 spoke torq thrust that is 6 lug application. Bolt pattern is 6 on 5.5inch. Hard to find wheels. I bought them without asking about the backspace and they are wrong for my truck. I have been lookinf for a set of wheels to mount the tires on but havent found anything so I am going to sell them with the tires.

09-26-2004, 12:49 AM	#9
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Rims are polished and tires are nice. I bought them so I do not know what the mileage is but they have a lot of tread. I am going to try to post pics but if you want pics emailed leave your email address. I have not been able to post these so if someone out there knows how to post the pics ,I can email them to you and you can post them for me .I would appreciate that. Frank Last edited by f.monroe; 09-26-2004 at 12:52 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.