Help W/ Rear Seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LUV2XCLR8 · 10-22-2004, 10:11 PM

WHY DO THREE OUTA FOUR BRACKETS HAVE SEAT BELT ANCHORS

* BIG CIRCLES ACROSS THE BOTTOM OF THE BENCH SEAT

I KNOW THERE USED TO BE A BELT ANCHORED 2 EA. END

* SMALL CIRCLE ON THE LEFT SIDE OF PICTURE NUMBER 1

I WANT ANOTHER FOOT TO MATCH THE OTHER THREE

, I'M
NOT GOING TO RE-USE THE END BOLTS, LOOKING FOR A 4TH
FOOT SO I CAN JUST CONNECT ALL OF MY BELTS THAT WAY.

PIC'S ATTACHED FOR REFERENCE TO MY QUESTION

*Gee_Emm* · 10-22-2004, 10:47 PM

Thats kinda messed up, I don't know how the rear seat belts work, on mine its just a big belt going from one end to the other, like 2 people could fit in it.

LUV2XCLR8 · 10-22-2004, 11:02 PM

Yea Gee, It Had One Attached To Each End And Then 3 Attached To
The Bolt Holes Seen In The Pictures, Still Has 1 Seat Belt In It, The
Others Were Cut At The Edge Of The Seat Cover Where It Overlaps.

**jamie72** · 10-22-2004, 11:04 PM

it will probily be hard to find just one, id just drill it out and tack weld a bolt on the back side, you`ll be cleaning, and painting them anyway..

jamie

LUV2XCLR8 · 10-23-2004, 09:30 AM

I Thought Maybe I Would Get Lucky And Find A Trashed Rear Bench
I Could Rob The Parts Off Of, My Arm Rests Are Bad Also, Ttt

**jamie72** · 10-23-2004, 11:33 AM

i got some nice arm rests but they are blue....
jamie

*Gee_Emm* · 10-23-2004, 12:35 PM

Are rear benches that hard to find? I have passed up a few in junkyards, I just headed straight for the hold down clamps and grabbed them.

LUV2XCLR8 · 10-23-2004, 02:28 PM

BEEN TO 15 JUNKYARDS IN LAST 3 MONTHS, HAVE YET TO SEE THE REMAINS
OF ANY BLAZERS, NEVER SEEN ONE IN A YARD BEFORE, HARD TO BELEIVE.

Quote:

Originally Posted by Gee_Emm

Are rear benches that hard to find? I have passed up a few in junkyards, I just headed straight for the hold down clamps and grabbed them.

bouncytruck · 10-23-2004, 04:00 PM

LUV - My '72 has only 2 of the brackets on the rear of the seat. GM didn't put the two center brackets on all the seats. The center seat belts bolt directly to the floor. I know this is stock because just about everything on my truck is stock, I have seen it on other trucks, and the rear seat I bought for my '69 from Kilomanjaro doesn't have holes to bolt on the two center brackets.

I would guess that your rear seat has been frankenstien'd at some point in time. The outside bracket may be from a suburban with shoulder belts or something - who knows. If you don't want to go to the trouble of searching for just one bracket, I would remove two and put the remaining two on the outside. Or swap the one with the hole to the inside positon and mount the seatbelt to the bolt hole that goes to the floor.

LUV2XCLR8 · 10-23-2004, 04:29 PM

Hmmm, Well I Really Did Not Want To Use The End Bolts, Even
Though That Is How Stock Is, I Thought With 4 Matching Type
Brackets I Could Just Have 3 Lap Belts And Nothing On Floor.

bouncytruck · 10-23-2004, 04:39 PM

I understand. I think the suburbans used the same brackets in the 3rd row.

LUV2XCLR8 · 10-24-2004, 08:25 AM

Quote:

Originally Posted by bouncytruck

I understand. I think the suburbans used the same brackets in the 3rd row.

THANKS BOUNCER.

teamharvey · 10-24-2004, 01:02 PM

I am still searching for the front bar hold downs if anyone has a pair.

Thanks,
Bret

bouncytruck · 10-24-2004, 01:58 PM

teamharvey, did you contact TONYP to see if he is still making them? I think he was asking around $30 a set. They don't look like the originals, but they function the same. I think he machines them out of solid aluminum.

LUV2XCLR8 · 10-25-2004, 04:43 PM

TTT

bouncytruck · 10-25-2004, 05:36 PM

LUV, contact Kilomanjaro. He may have a few extras laying around. I haven't seen much of him on the board in recent months, so hopefully he is still dealing with truck parts.

LUV2XCLR8 · 10-25-2004, 05:53 PM

Pm'd Him And Cheesewagon, Thanks

teamharvey · 10-26-2004, 12:50 AM

Quote:

Originally Posted by bouncytruck

teamharvey, did you contact TONYP to see if he is still making them? I think he was asking around $30 a set. They don't look like the originals, but they function the same. I think he machines them out of solid aluminum.

No reply from him

Does anyone have a pic or deminsions of them ?

thanks,
Bret

LUV2XCLR8 · 10-27-2004, 03:17 PM

TTT

*ILIVE4TRUCKS* · 10-27-2004, 04:52 PM

Quote:

Originally Posted by teamharvey

No reply from him

Does anyone have a pic or deminsions of them ?

thanks,
Bret

I have a set somewhere in the garage. Ill try to find them and take a picture for you.

Huck · 10-27-2004, 06:56 PM

My 72 only has the outer brackets. My 71 only had the outer brackets. Believe Kilamangero moved to Alaska a while back. He still posts some stuff on e-bay----beleive his name is John.

gmcnorton · 10-27-2004, 08:36 PM

mine has belts bolted to the outer on on each end , both belts bolt to the center bracket in the middle i believe it is original because it has a cover big enough to cover both when bolted together. ??????//?

neonlarry · 10-27-2004, 10:54 PM

Suburban middle seat brackets are not the same as blazer ones. They kinda look the same, but blazer ones are short in the front, tall in the back, and suburban ones are tall in the front, short in the back. I have 2 extra sets of the back ones for the suburban seat, but I dont have a blazer, so no blazer seat brackets.

LUV2XCLR8 · 10-29-2004, 03:51 PM

MINE APPEARS TO ALSO FOLD FORWARD IF THE ARM RESTS WERE OFF

burb71 · 10-29-2004, 04:31 PM

Blazer rear seat, and Suburban middle seat mounting brackets are a little different, but the Blazer rear and Suburban's 3rd row seat mounting brackets are the same.
They both use 2 or 4 tall mounts for support in the rear of the seat.
And 2 short pipe type mounts for support in the front of the seat.

10-22-2004, 10:11 PM	#1
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Help W/ Rear Seat WHY DO THREE OUTA FOUR BRACKETS HAVE SEAT BELT ANCHORS * BIG CIRCLES ACROSS THE BOTTOM OF THE BENCH SEAT I KNOW THERE USED TO BE A BELT ANCHORED 2 EA. END * SMALL CIRCLE ON THE LEFT SIDE OF PICTURE NUMBER 1 I WANT ANOTHER FOOT TO MATCH THE OTHER THREE , I'M NOT GOING TO RE-USE THE END BOLTS, LOOKING FOR A 4TH FOOT SO I CAN JUST CONNECT ALL OF MY BELTS THAT WAY. PIC'S ATTACHED FOR REFERENCE TO MY QUESTION __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-22-2004, 11:02 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Yea Gee, It Had One Attached To Each End And Then 3 Attached To The Bolt Holes Seen In The Pictures, Still Has 1 Seat Belt In It, The Others Were Cut At The Edge Of The Seat Cover Where It Overlaps. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-22-2004, 11:04 PM	#4
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	it will probily be hard to find just one, id just drill it out and tack weld a bolt on the back side, you`ll be cleaning, and painting them anyway.. jamie __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

10-23-2004, 09:30 AM	#5
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	I Thought Maybe I Would Get Lucky And Find A Trashed Rear Bench I Could Rob The Parts Off Of, My Arm Rests Are Bad Also, Ttt __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-23-2004, 11:33 AM	#6
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	i got some nice arm rests but they are blue.... jamie __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

10-22-2004, 10:47 PM	#2
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Thats kinda messed up, I don't know how the rear seat belts work, on mine its just a big belt going from one end to the other, like 2 people could fit in it.

10-23-2004, 12:35 PM	#7
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	Are rear benches that hard to find? I have passed up a few in junkyards, I just headed straight for the hold down clamps and grabbed them.

10-23-2004, 04:00 PM	#9
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	LUV - My '72 has only 2 of the brackets on the rear of the seat. GM didn't put the two center brackets on all the seats. The center seat belts bolt directly to the floor. I know this is stock because just about everything on my truck is stock, I have seen it on other trucks, and the rear seat I bought for my '69 from Kilomanjaro doesn't have holes to bolt on the two center brackets. I would guess that your rear seat has been frankenstien'd at some point in time. The outside bracket may be from a suburban with shoulder belts or something - who knows. If you don't want to go to the trouble of searching for just one bracket, I would remove two and put the remaining two on the outside. Or swap the one with the hole to the inside positon and mount the seatbelt to the bolt hole that goes to the floor. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-23-2004, 04:29 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Hmmm, Well I Really Did Not Want To Use The End Bolts, Even Though That Is How Stock Is, I Thought With 4 Matching Type Brackets I Could Just Have 3 Lap Belts And Nothing On Floor. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-23-2004, 04:39 PM	#11
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	I understand. I think the suburbans used the same brackets in the 3rd row. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-24-2004, 01:02 PM	#13
teamharvey Registered User Join Date: Jul 2004 Location: Turlock, Ca Posts: 578	I am still searching for the front bar hold downs if anyone has a pair. Thanks, Bret

10-24-2004, 01:58 PM	#14
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	teamharvey, did you contact TONYP to see if he is still making them? I think he was asking around $30 a set. They don't look like the originals, but they function the same. I think he machines them out of solid aluminum. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-25-2004, 04:43 PM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	TTT __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-25-2004, 05:36 PM	#16
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	LUV, contact Kilomanjaro. He may have a few extras laying around. I haven't seen much of him on the board in recent months, so hopefully he is still dealing with truck parts. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

10-25-2004, 05:53 PM	#17
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Pm'd Him And Cheesewagon, Thanks __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T



Register or Log In To remove these advertisements.

10-27-2004, 03:17 PM	#19
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	TTT __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-27-2004, 06:56 PM	#21
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	My 72 only has the outer brackets. My 71 only had the outer brackets. Believe Kilamangero moved to Alaska a while back. He still posts some stuff on e-bay----beleive his name is John.

10-27-2004, 08:36 PM	#22
gmcnorton Registered User Join Date: Aug 2002 Location: Middleport, Pa. 17953 Posts: 737	belt mine has belts bolted to the outer on on each end , both belts bolt to the center bracket in the middle i believe it is original because it has a cover big enough to cover both when bolted together. ??????//? __________________ 70 GMC SHORT STEP , 71 BLAZER ,72 JIMMY,72 BLAZER, JUST NEED THAT SUBURBAN NOW......WANTING MORE

10-27-2004, 10:54 PM	#23
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,745	Suburban middle seat brackets are not the same as blazer ones. They kinda look the same, but blazer ones are short in the front, tall in the back, and suburban ones are tall in the front, short in the back. I have 2 extra sets of the back ones for the suburban seat, but I dont have a blazer, so no blazer seat brackets. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

10-29-2004, 03:51 PM	#24
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	MINE APPEARS TO ALSO FOLD FORWARD IF THE ARM RESTS WERE OFF __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-29-2004, 04:31 PM	#25
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Blazer rear seat, and Suburban middle seat mounting brackets are a little different, but the Blazer rear and Suburban's 3rd row seat mounting brackets are the same. They both use 2 or 4 tall mounts for support in the rear of the seat. And 2 short pipe type mounts for support in the front of the seat.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.