Last parts! 87 Burban, parting out in San Antonio, TX - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dott · 11-02-2004, 12:14 AM

Parts I have left, add freight to all prices.

Front clip very good shape, $200 refer to link to see pics
http://207.44.196.117/vboard/showthread.php3?t=122443

Front bumper with "pushers" and all brackets $25------SOLD-------
Complete A/C system w/ rear air $55 reduced to $30 see pics below----SOLD----
2nd row doors w/ electric locks and windows $40ea
5ea 8" 5 lug steel rally wheels w/ 3 trim rings $45 reduced to $35
ESC module from TBI $10
EGR valve and vacuum valve from TBI $10
Complete rear tailgate w/glass and electric motor $45
Front bucket seats w/ no tracks $5ea
Third row seat $15
Front calipers $5ea
Brake proportioning valve $10
Wiper motor $10 see pics below----SOLD----
Left taillight lens w/ chrome trim $10
Misc switches and wiring - PM me
Ebrake mechanism $10 see pics below
Blue sun visors $5 for both, see pics below---SOLD----
Hood spring loaded hinges $10 for both, see pics below

Front antisway bar from 78 GMC 4x4 pickup w/ bolts and mounts $15 reduced to $10

If you're interested in any of the above items, PM me, I'm sure we can work something out.

Russell · 11-02-2004, 02:55 AM

did the throttle body have some steel braided fuel lines going from the intake to the frame? How much for both of those steel braided lines, and some hard line to run a compression fitting to?

dott · 11-02-2004, 07:59 AM

I am swapping the '87 TBI engine and all related components into my 78 4x4 pickup for better off-roading. None of the fuel system components are available.

Russell · 11-02-2004, 11:12 AM

alright, thanks anyways

76HighSierra · 11-03-2004, 01:23 AM

Still planning on seeing you soon, Dale. Was it chilly down there today? Was SNOWING up here!! I was in Lubbock this morning and it was worse there.

dott · 11-03-2004, 07:37 AM

Quote:

Originally Posted by 76HighSierra

Still planning on seeing you soon, Dale. Was it chilly down there today? Was SNOWING up here!! I was in Lubbock this morning and it was worse there.

11-3-04 it's 50deg F this morning. A welcome change. Has been cool for the last couple days. The short days are always a bummer because I am an outside person. It's dark when I get home.

The axle is out and ready for you. I have it off the ground and ready to be loaded. Let me know as soon as you have a schedule.

Thanks, Dale

dott · 11-08-2004, 10:53 PM

Pics for top of thread.

dott · 11-08-2004, 10:56 PM

Pics for top of thread.

dott · 11-08-2004, 11:00 PM

Pics for top of thread.

dott · 11-08-2004, 11:03 PM

Pics for top of thread.

patgizz · 11-08-2004, 11:08 PM

please let me know shipping on the pair of front calipers to 44256 if they are for the 1.25" wide rotor.

dott · 11-08-2004, 11:12 PM

Pics of some of the parts for Rear A/C unit at top of thread. System was holding pressure when removed.

dott · 11-08-2004, 11:33 PM

Rotors measure 12" diam, say "MIN THICK 1.215"

From 78217 to 44256 via UPS Ground $16.90
Billable Weight: 22.0 lbs. Dimensions: 6 x 6 x 12 in.
Thanks for asking.

Quote:

Originally Posted by patgizz

please let me know shipping on the pair of front calipers to 44256 if they are for the 1.25" wide rotor.

76HighSierra · 11-09-2004, 12:01 AM

Quote:

Originally Posted by dott

11-3-04 it's 50deg F this morning. A welcome change. Has been cool for the last couple days. The short days are always a bummer because I am an outside person. It's dark when I get home.

The axle is out and ready for you. I have it off the ground and ready to be loaded. Let me know as soon as you have a schedule.

Thanks, Dale

How's this Sunday looking for you? Let me know via PM or e-mail.

Marc

dott · 11-09-2004, 08:01 AM

Quote:

Originally Posted by 76HighSierra

How's this Sunday looking for you? Let me know via PM or e-mail.

Marc

I tried to send a PM, your message box is full.

76HighSierra · 11-09-2004, 06:26 PM

Fixed the inbox and replied to your e-mail.

Take care,
Marc

76HighSierra · 11-23-2004, 11:04 PM

Just wanted to let everyone know that "dott" is a stand up guy. Parts were in promised condition, and a heck of a nice guy to boot!! Thanks, Dale.

Marc

badone07 · 11-23-2004, 11:35 PM

Dott, if not spoken for yet and stitching is good, I'll take the sunvisors. They are easy to ship. I would also take the ac setup too less the rear setup, but just a little too far away to pick up. I pm'ed you.

dott · 11-24-2004, 02:16 AM

I appreciate the compliment, Marc.

Quote:

Originally Posted by 76HighSierra

Just wanted to let everyone know that "dott" is a stand up guy. Parts were in promised condition, and a heck of a nice guy to boot!! Thanks, Dale.

Marc

mckpaul · 11-24-2004, 09:30 AM

Hey Dale - Put me down for the wiper motor. I'll send a PM.
Also, have to second what Marc said. I picked up the front doors from dott, he already had them pulled for me when I got there. And he's definitely one of the good guys on here.

11-02-2004, 12:14 AM	#1
dott Registered User Join Date: Sep 2004 Location: San Antonio, TX Posts: 39	Last parts! 87 Burban, parting out in San Antonio, TX Parts I have left, add freight to all prices. Front clip very good shape, $200 refer to link to see pics http://207.44.196.117/vboard/showthread.php3?t=122443 Front bumper with "pushers" and all brackets $25------SOLD------- Complete A/C system w/ rear air $55 reduced to $30 see pics below----SOLD---- 2nd row doors w/ electric locks and windows $40ea 5ea 8" 5 lug steel rally wheels w/ 3 trim rings $45 reduced to $35 ESC module from TBI $10 EGR valve and vacuum valve from TBI $10 Complete rear tailgate w/glass and electric motor $45 Front bucket seats w/ no tracks $5ea Third row seat $15 Front calipers $5ea Brake proportioning valve $10 Wiper motor $10 see pics below----SOLD---- Left taillight lens w/ chrome trim $10 Misc switches and wiring - PM me Ebrake mechanism $10 see pics below Blue sun visors $5 for both, see pics below---SOLD---- Hood spring loaded hinges $10 for both, see pics below Front antisway bar from 78 GMC 4x4 pickup w/ bolts and mounts $15 reduced to $10 If you're interested in any of the above items, PM me, I'm sure we can work something out. __________________ '78 GMC 5.7L TBI, 4x4 longbed, 56" rears, 52" fronts '01 F350 6.8L Crew Cab 4x4 Longbed Last edited by dott; 11-24-2004 at 02:28 PM. Reason: added info

11-02-2004, 02:55 AM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	did the throttle body have some steel braided fuel lines going from the intake to the frame? How much for both of those steel braided lines, and some hard line to run a compression fitting to? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

11-02-2004, 07:59 AM	#3
dott Registered User Join Date: Sep 2004 Location: San Antonio, TX Posts: 39	braided lines I am swapping the '87 TBI engine and all related components into my 78 4x4 pickup for better off-roading. None of the fuel system components are available. __________________ '78 GMC 5.7L TBI, 4x4 longbed, 56" rears, 52" fronts '01 F350 6.8L Crew Cab 4x4 Longbed

11-02-2004, 11:12 AM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	alright, thanks anyways __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

11-03-2004, 01:23 AM	#5
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	Still planning on seeing you soon, Dale. Was it chilly down there today? Was SNOWING up here!! I was in Lubbock this morning and it was worse there. __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.

11-08-2004, 10:53 PM	#7
dott Registered User Join Date: Sep 2004 Location: San Antonio, TX Posts: 39	Ebrake Pics Pics for top of thread. Attached Images __________________ '78 GMC 5.7L TBI, 4x4 longbed, 56" rears, 52" fronts '01 F350 6.8L Crew Cab 4x4 Longbed

11-08-2004, 10:56 PM	#8
dott Registered User Join Date: Sep 2004 Location: San Antonio, TX Posts: 39	Wiper motor pics Pics for top of thread. Attached Images __________________ '78 GMC 5.7L TBI, 4x4 longbed, 56" rears, 52" fronts '01 F350 6.8L Crew Cab 4x4 Longbed

11-08-2004, 11:00 PM	#9
dott Registered User Join Date: Sep 2004 Location: San Antonio, TX Posts: 39	Hood hinge pics Pics for top of thread. Attached Images __________________ '78 GMC 5.7L TBI, 4x4 longbed, 56" rears, 52" fronts '01 F350 6.8L Crew Cab 4x4 Longbed

11-08-2004, 11:03 PM	#10
dott Registered User Join Date: Sep 2004 Location: San Antonio, TX Posts: 39	Sun visor pics Pics for top of thread. Attached Images __________________ '78 GMC 5.7L TBI, 4x4 longbed, 56" rears, 52" fronts '01 F350 6.8L Crew Cab 4x4 Longbed

11-08-2004, 11:08 PM	#11
patgizz Registered User Join Date: Oct 2002 Location: Cleveland, OH Posts: 429	please let me know shipping on the pair of front calipers to 44256 if they are for the 1.25" wide rotor.

11-08-2004, 11:12 PM	#12
dott Registered User Join Date: Sep 2004 Location: San Antonio, TX Posts: 39	A/C unit pics Pics of some of the parts for Rear A/C unit at top of thread. System was holding pressure when removed. Attached Images __________________ '78 GMC 5.7L TBI, 4x4 longbed, 56" rears, 52" fronts '01 F350 6.8L Crew Cab 4x4 Longbed Last edited by dott; 11-08-2004 at 11:13 PM. Reason: added info

11-09-2004, 06:26 PM	#16
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	Fixed the inbox and replied to your e-mail. Take care, Marc __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.

11-23-2004, 11:04 PM	#17
76HighSierra DAMN, I love Big Blocks! Join Date: Aug 2003 Location: New Mexico, USA Posts: 619	Just wanted to let everyone know that "dott" is a stand up guy. Parts were in promised condition, and a heck of a nice guy to boot!! Thanks, Dale. Marc __________________ Marc Bona Hobbs, New Mexico 1976 1/2 ton GMC High Sierra. 454 c.i.d./ TH400. *Soon to get a mild warming over.* 3.40 rear.

11-23-2004, 11:35 PM	#18
badone07 Project 2 Resume Join Date: May 2004 Location: Jim Thorpe, PA Posts: 884	Dott, if not spoken for yet and stitching is good, I'll take the sunvisors. They are easy to ship. I would also take the ac setup too less the rear setup, but just a little too far away to pick up. I pm'ed you. __________________ John 1984 C30 Chevy Crew Cab Dually 1998 Jeep Cherokee 4x4 2004 Chevy Trailblazer 4x4 (wife's) 1970 Mustang FB fully tubed (getting 521 BBF & powerglide) 1978 Nova 2dr (going BBCaddy & S.P. th400) 1984 Monte SS (circle track car)

11-24-2004, 09:30 AM	#20
mckpaul Registered User Join Date: Dec 2002 Location: Houston Posts: 300	Hey Dale - Put me down for the wiper motor. I'll send a PM. Also, have to second what Marc said. I picked up the front doors from dott, he already had them pulled for me when I got there. And he's definitely one of the good guys on here. __________________ Paul 1984 Chevy C-10 LWB/305



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.