How much is a NoSPIN worth? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CE20934 · 11-15-2004, 01:18 AM

I'm not looking for one to buy just yet, but I am curious what's a good price for a unit in good shape.

I've seen anywhere from $150-500 on eBay, but have yet to see one at any of my local swap meets.

However, if someone has one lying around, I'm not one to turn down a good deal.

4bynut · 11-15-2004, 01:48 AM

I have one in a 12 bolt 6 lug rear w/ 3.73 gears $100 for complete rear end.

Thank's Jason.

67ChevyC10Stepside · 11-15-2004, 01:54 AM

hmm...any way to get that to PA?

1969 GMC · 11-15-2004, 02:12 AM

I dont know, it depends. Most people just get rid of the eaton axles, but they have a lot of good things going for them. I paid $100 for a complete H052 with 4.57 gears and the locker.

Presently, they sell the 14 bolt detroit locker (which is the same thing, just has different side gears for the 30 spline axleshafts) for around $400. Whack that in half and I think thats a fair price for one of these units. You also have to remember, they dont make them for the eaton any more. Also, these older detroit lockers are actually stronger than the ones made today due to the change to the "soft" type locker that is less harsh.

CE20934 · 11-15-2004, 08:13 PM

I'm keeping my HO72, that's a given. I've grown to love the ugly SOB--especially since it stopped leaking.

Thanks for the input.

**BAD4X4** · 11-15-2004, 08:42 PM

put more oil in it.....hahahahaha I love mine too, people ask what kind of rearend it is all the time.

Rod · 11-15-2004, 10:09 PM

$250 - $300 range I suppose.

PM me ... I may let one go.

Robert1970C20rstbukt · 11-15-2004, 11:26 PM

It also depends on whether they're set up for leafs springs or coil springs, that might bounce the price around.

CE20934 · 11-16-2004, 12:31 AM

I don't see how. I'm just wondering about the locker itself, not the rear end.

Robert1970C20rstbukt · 11-16-2004, 08:13 PM

You could get the rear ends built three different ways from the factory:

Open diff.
No-Spin
Positrac

I'd think if you have a No-Spin or a Positrac it would be worth some $$$ to the right person.

67ChevyC10Stepside · 11-16-2004, 08:17 PM

what is no-spin? aint that posi?

**JIMs70GMC** · 11-16-2004, 08:50 PM

It's a detroit locker for the eaton rear axle. The max traction option was a dana/spicer power-loc.

1969 GMC · 11-16-2004, 10:11 PM

Quote:

Originally Posted by Robert1970C20rstbukt

You could get the rear ends built three different ways from the factory:

Open diff.
No-Spin
Positrac

I'd think if you have a No-Spin or a Positrac it would be worth some $$$ to the right person.

It depends on what axle you have. If you have a dana 44 or 60 rear, it would be the max traction (power-lock) option Jim mentioned. If you have an Eaton, it was the No-Spin (commercial name for the detroit locker). If you have a 12 bolt, it is listed as Positraction. If you have a factory posi in the front axle, it appears on the sticker usually just as Track-Lock (another spicer trade name).

Robert1970C20rstbukt · 11-16-2004, 11:22 PM

OK, cool.

Rod · 11-16-2004, 11:50 PM

Last detroit locker I sold was this one.

teeitup · 11-17-2004, 12:01 AM

I got a no spin 4.56 here for $100 but I don't want to ship it. I may be able to get it to Wisc or Minn. I got a couple members coming down next month. Thanks Randy

11-15-2004, 01:18 AM	#1
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	How much is a NoSPIN worth? (possible WTB) I'm not looking for one to buy just yet, but I am curious what's a good price for a unit in good shape. I've seen anywhere from $150-500 on eBay, but have yet to see one at any of my local swap meets. However, if someone has one lying around, I'm not one to turn down a good deal. __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed Last edited by CE20934; 11-15-2004 at 01:31 AM.

11-15-2004, 01:54 AM	#3
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	hmm...any way to get that to PA? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-15-2004, 02:12 AM	#4
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	I dont know, it depends. Most people just get rid of the eaton axles, but they have a lot of good things going for them. I paid $100 for a complete H052 with 4.57 gears and the locker. Presently, they sell the 14 bolt detroit locker (which is the same thing, just has different side gears for the 30 spline axleshafts) for around $400. Whack that in half and I think thats a fair price for one of these units. You also have to remember, they dont make them for the eaton any more. Also, these older detroit lockers are actually stronger than the ones made today due to the change to the "soft" type locker that is less harsh. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

11-15-2004, 08:13 PM	#5
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	I'm keeping my HO72, that's a given. I've grown to love the ugly SOB--especially since it stopped leaking. Thanks for the input. __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

11-15-2004, 08:42 PM	#6
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	put more oil in it.....hahahahaha I love mine too, people ask what kind of rearend it is all the time. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

11-15-2004, 01:48 AM	#2
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	I have one in a 12 bolt 6 lug rear w/ 3.73 gears $100 for complete rear end. Thank's Jason.

11-15-2004, 10:09 PM	#7
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	$250 - $300 range I suppose. PM me ... I may let one go. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-15-2004, 11:26 PM	#8
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	It also depends on whether they're set up for leafs springs or coil springs, that might bounce the price around. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

11-16-2004, 12:31 AM	#9
CE20934 Senior Member Join Date: Apr 2002 Location: Help! I'm in an office park with its own network of freeways! Posts: 470	I don't see how. I'm just wondering about the locker itself, not the rear end. __________________ '67 C20--427 tall deck/SM420, 4.10 HO52 (Michigan has not been kind to the Old Man) '95 Caprice--355 LT1/T56/3.42 8.5" 10-bolt (daily driver, almost 300k on the chassis) '07 Outback--wife's car. 125k & counting. No head gasket or transmission issues yet. fingers crossed

11-16-2004, 08:13 PM	#10
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	You could get the rear ends built three different ways from the factory: Open diff. No-Spin Positrac I'd think if you have a No-Spin or a Positrac it would be worth some $$$ to the right person. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

11-16-2004, 08:17 PM	#11
67ChevyC10Stepside Registered User Join Date: Mar 2004 Location: Butler PA Posts: 3,034	what is no-spin? aint that posi? __________________ 67 c-10, 400 SB, TH350, 4.10 gears, Blazer tank,camaro tach, sidemarker fuel fill (soon) WTB: stepside parts, 67 front end parts, 67 small window cab. posi for 3.73 or 4.10 for 12 bolt and 10 bolt.

11-16-2004, 08:50 PM	#12
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	It's a detroit locker for the eaton rear axle. The max traction option was a dana/spicer power-loc. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

11-16-2004, 11:22 PM	#14
Robert1970C20rstbukt Registered User Join Date: Jun 2004 Location: Beeville, Texas Posts: 1,943	OK, cool. __________________ RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck

11-16-2004, 11:50 PM	#15
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Last detroit locker I sold was this one. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-17-2004, 12:01 AM	#16
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	I got a no spin 4.56 here for $100 but I don't want to ship it. I may be able to get it to Wisc or Minn. I got a couple members coming down next month. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.