need picture of 2002-1999 wheels on 3/4 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bill72BB · 06-29-2002, 01:08 AM

Does anyone have pictures of these rims on a 3/4 ton . I found a vendor who has the lug nuts to mount the caps ,so now I'm thinking about getting a set for the BB .

Thanks Bill

Blue_71 · 06-29-2002, 02:16 AM

im wanting to put those on my 4x4, but with the price i doubt i will

OhioDan · 06-29-2002, 03:30 AM

You might try and check with these guys. They have a lot of factory wheels and centers.

http://truckandrv.com/index.html

That's where I got the rims, centers, lug nuts and the lug nut covers for my truck. Price was good also.

Bill72BB · 06-29-2002, 11:52 AM

Blue_71

I'm thinking I can get a set of take off's cheaper than buying rims and tire's .

I know someone has these rims on our trucks, he is the one who told me the lug nut to mount the caps were available.

Bill

Blue_71 · 06-29-2002, 12:32 PM

all the ones ive seen on ebay (take off or new) have been any where from 200-700. the ones for $200 im sure were run up pretty quickly

Mike C · 06-29-2002, 07:54 PM

The new Four Wheeler magazine has a new project truck. It was a 1/2 ton 4x4 71 'burb that has now been converted to 3/4 ton axles. They've got a color photo of it with those wheels on it.

Bill72BB · 06-30-2002, 05:07 PM

Thanks Mike ;

I'll have to try to get a copy.

Bill

KD · 06-30-2002, 09:24 PM

I put these on today,I got them off e-bay for 190 bucks plus shipping,included new rings and center caps.They are new.

fluffytx1 · 06-30-2002, 10:53 PM

I just put chrome mods on and now i am thinking of a switch

UNCLEBOB · 06-30-2002, 11:36 PM

Bill72BB what is the width and backspacing on those rims. Thanks

Bill72BB · 07-01-2002, 11:08 AM

KD'
Nice wheels where did you get the special lug nuts to mount the caps ??

Uncle bob . not sure about the backspacing ,but they come in 6 and 6 1/2 wide

Bill

KD · 07-01-2002, 07:10 PM

Bill I got the lug nuts from NAPA,32 nuts @3.94 each,ouch.

wnc mountain · 07-01-2002, 09:35 PM

I have a set of steel 8-lugs off of my 99 burb trim rings and center caps the works if anyone is interested. Not sure about the width and setback on them.

I can take some pictures of them and post. Have them in boxes. Been there since the truck was new.

06-29-2002, 01:08 AM	#1
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	need picture of 2002-1999 wheels on 3/4 ton Does anyone have pictures of these rims on a 3/4 ton . I found a vendor who has the lug nuts to mount the caps ,so now I'm thinking about getting a set for the BB . Thanks Bill Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

06-29-2002, 03:30 AM	#3
OhioDan Registered User Join Date: Apr 2002 Location: New Carlisle, Ohio,USA Posts: 1,404	You might try and check with these guys. They have a lot of factory wheels and centers. http://truckandrv.com/index.html That's where I got the rims, centers, lug nuts and the lug nut covers for my truck. Price was good also. Attached Images __________________ LIFE AIN'T EASY WHEN YER FAT AND GREASY! GMC= Got More Class! 1970 GMC LWB, Fleetside, 350/4spd, Flowmaster "40's", 2002 GMC 16" Rallies, cowl hood,and added a bunch of options that weren't there when I started.

06-29-2002, 11:52 AM	#4
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Blue_71 I'm thinking I can get a set of take off's cheaper than buying rims and tire's . I know someone has these rims on our trucks, he is the one who told me the lug nut to mount the caps were available. Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

06-29-2002, 07:54 PM	#6
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,723	The new Four Wheeler magazine has a new project truck. It was a 1/2 ton 4x4 71 'burb that has now been converted to 3/4 ton axles. They've got a color photo of it with those wheels on it. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

06-30-2002, 05:07 PM	#7
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Thanks Mike ; I'll have to try to get a copy. Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

06-30-2002, 09:24 PM	#8
KD Truck Nut Join Date: Mar 2000 Location: Big Lake,MN,US Posts: 134	I put these on today,I got them off e-bay for 190 bucks plus shipping,included new rings and center caps.They are new. Attached Images __________________ '70 3/4 manual w/350 4.56's .Doing a ground up on a '67 4x4 4"lift.

06-30-2002, 10:53 PM	#9
fluffytx1 Registered User Join Date: Feb 2002 Location: point blank Posts: 113	nice I just put chrome mods on and now i am thinking of a switch __________________ 1968 GMC CST long wide box http://groups.yahoo.com/group/67-72-collectors/

06-30-2002, 11:36 PM	#10
UNCLEBOB Registered User Join Date: May 2000 Location: bremerton wa 98310 Posts: 100	Bill72BB what is the width and backspacing on those rims. Thanks __________________ 68 lwb 383 solid roller,250dur, 582lift, afr 210s, 10.8 comp. edel.rpm, 750vs,1 3/4 headers turbo 400, 3500 stall,ford 9 inch 3.89 gears

07-01-2002, 11:08 AM	#11
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	KD' Nice wheels where did you get the special lug nuts to mount the caps ?? Uncle bob . not sure about the backspacing ,but they come in 6 and 6 1/2 wide Bill __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

07-01-2002, 07:10 PM	#12
KD Truck Nut Join Date: Mar 2000 Location: Big Lake,MN,US Posts: 134	Bill I got the lug nuts from NAPA,32 nuts @3.94 each,ouch. __________________ '70 3/4 manual w/350 4.56's .Doing a ground up on a '67 4x4 4"lift.

07-01-2002, 09:35 PM	#13
wnc mountain More hobbies than money! Join Date: Jan 2002 Location: Raleigh, nc, usa Posts: 655	I have a set of steel 8-lugs off of my 99 burb trim rings and center caps the works if anyone is interested. Not sure about the width and setback on them. I can take some pictures of them and post. Have them in boxes. Been there since the truck was new. __________________ '70 cst10/swb 350, 3 on the tree, factory buckets. '70 GMC lwb 350/350 ps,pb '72 c-10 lwb 350/350 a/c, ps, pb '72 Blazer project Last edited by wnc mountain; 07-01-2002 at 09:45 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.