Will my coil spring fall out? *PIC* - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972 · 11-22-2004, 06:44 PM

I recently bought a 1972 C10 and the part that holds the rear coil spring to the frame is rusted off, it isn't doing much to hold the spring. Is this something to be worried about or will it run forever?

Bamm · 11-22-2004, 06:46 PM

I bought new spring retainers (?) from Tim Christian. Rather be safe than sorry.......Pretty good price too..............Jerry

cableguy0 · 11-22-2004, 06:46 PM

mine has been like that for a long while i keep meaning to fix it. its not a good idea to leave it that way i know better and know it needs fixed. the spring cups are cheap fix it

Super Duck · 11-22-2004, 06:48 PM

I would fix it dude

1972 · 11-22-2004, 06:50 PM

Thanks guys. I guess I will fix it for now. Within a year I hope to have bags at all four corners.

Super Duck · 11-22-2004, 06:54 PM

Me Too

FRENCHBLUE72 · 11-22-2004, 09:37 PM

I am pretty sure that I would fix that.......ASAP...

Fred T · 11-23-2004, 12:02 AM

Good to hear you're fixing it. Major safety issue. It probably won't cause any problems and might stay like that for your lifetime, but if you hit a bump just wrong that spring could pop out.

1972 · 11-23-2004, 06:07 AM

Ya, it sounds like I should do something about it, especially since I plan to pull a trailer with it. I haven't looked much at it other than long enough to decide that it was broke, how does that part come out? Does it unbolt?

**N2TRUX** · 11-23-2004, 11:32 AM

That is not pretty. It may stay like that forever, but then again ya never know....

64fleetside · 11-23-2004, 12:35 PM

As long as the shocks are still bolted on & even then if weight is on the truck it can't go anywhere. That being said, I would still fix it, esp. if you gonna tow ANYTHING, weird stuff happens pulling a trailer. Buy springs, all hardware & cups & cut it all off & replace it all, after 30+ years that stuff is tired & won't unbolt. Brian

11-22-2004, 06:44 PM	#1
1972 Majician Join Date: Nov 2004 Location: In the Middle Posts: 329	Will my coil spring fall out? PIC I recently bought a 1972 C10 and the part that holds the rear coil spring to the frame is rusted off, it isn't doing much to hold the spring. Is this something to be worried about or will it run forever?

11-22-2004, 06:46 PM	#2
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I bought new spring retainers (?) from Tim Christian. Rather be safe than sorry.......Pretty good price too..............Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

11-22-2004, 06:46 PM	#3
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	mine has been like that for a long while i keep meaning to fix it. its not a good idea to leave it that way i know better and know it needs fixed. the spring cups are cheap fix it __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

11-22-2004, 06:48 PM	#4
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	I would fix it dude __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

11-22-2004, 06:54 PM	#6
Super Duck Chevy Nuttttt Join Date: Sep 2004 Location: Santa Maria Ca. Posts: 568	Me Too __________________ 67' Chev swb step side 69' SS elky 03' Chev ext cab 4X4 hey who lernt me to spell is there anything else?

11-22-2004, 06:50 PM	#5
1972 Majician Join Date: Nov 2004 Location: In the Middle Posts: 329	Thanks guys. I guess I will fix it for now. Within a year I hope to have bags at all four corners.

11-22-2004, 09:37 PM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I am pretty sure that I would fix that.......ASAP... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-23-2004, 12:02 AM	#8
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Good to hear you're fixing it. Major safety issue. It probably won't cause any problems and might stay like that for your lifetime, but if you hit a bump just wrong that spring could pop out. __________________ Fred There is no such thing as too much cam...just not enough engine.

11-23-2004, 06:07 AM	#9
1972 Majician Join Date: Nov 2004 Location: In the Middle Posts: 329	Ya, it sounds like I should do something about it, especially since I plan to pull a trailer with it. I haven't looked much at it other than long enough to decide that it was broke, how does that part come out? Does it unbolt?

11-23-2004, 11:32 AM	#10
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	That is not pretty. It may stay like that forever, but then again ya never know.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-23-2004, 12:35 PM	#11
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	As long as the shocks are still bolted on & even then if weight is on the truck it can't go anywhere. That being said, I would still fix it, esp. if you gonna tow ANYTHING, weird stuff happens pulling a trailer. Buy springs, all hardware & cups & cut it all off & replace it all, after 30+ years that stuff is tired & won't unbolt. Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.