Anybody got a junk body or cab for parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tim_and_bobbi_blazer · 12-03-2004, 09:50 PM

I need a couple of pieces off a junk body or cab.

1) passenger side, top, door hinge, nut plate. It's the piece rattling around inside the door post where the bolts thread into.

2) passenger side, frount, inboard seat nut plates. In the floor board, where the seats mount 2 nuts are welded to the tub crossmember. One of mine is stripped so I figured I'd replace both.

If anybody has an old, junk cab or body laying around they'd be willing to torch these pieces off of, Let me know what you'd need for them.

c-1072 · 12-03-2004, 10:19 PM

I am cutting a cab up on monday i will see what i have .

tim_and_bobbi_blazer · 12-04-2004, 01:47 AM

I really appreciate it. If you aren't clear about what I need, I can send you a picture or try to clearify. Sometimes my descriptions aren't the greatest.

tim_and_bobbi_blazer · 12-08-2004, 06:31 PM

Getting ready to start paint prep and really need to get these parts in so if anybody has them, let me know

FRENCHBLUE72 · 12-11-2004, 08:45 PM

I may have the nut plate let me look around you can have it if I find em.... P.m. me you addy and I get them shipped.

tim_and_bobbi_blazer · 12-21-2004, 09:25 PM

Got it today. Thanks again

FRENCHBLUE72 · 12-22-2004, 10:42 AM

No problem.. I would like to see what you guys do to get the plate in there though as I have the same thing I need to do to mine..

tim_and_bobbi_blazer · 12-22-2004, 10:17 PM

Tim will do this one.

He says 'I'm going to cut a #$@#$ hole under the dash, work the nut plate into the post, and weld the $%!@$# hole back up. Then, I'm going to let you paint the #@$@#$ patch.

It will be a while before he gets around to doing it though. We are moving in a few days and with Christmas, we have a full plate.

Thank you so much for the part.

12-03-2004, 09:50 PM	#1
tim_and_bobbi_blazer Registered User Join Date: Oct 2004 Location: Texas Posts: 105	Anybody got a junk body or cab for parts? I need a couple of pieces off a junk body or cab. 1) passenger side, top, door hinge, nut plate. It's the piece rattling around inside the door post where the bolts thread into. 2) passenger side, frount, inboard seat nut plates. In the floor board, where the seats mount 2 nuts are welded to the tub crossmember. One of mine is stripped so I figured I'd replace both. If anybody has an old, junk cab or body laying around they'd be willing to torch these pieces off of, Let me know what you'd need for them. __________________ Thank you Bobbi See my Blazer Restro Pictures HERE

12-03-2004, 10:19 PM	#2
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Parts I am cutting a cab up on monday i will see what i have .

12-04-2004, 01:47 AM	#3
tim_and_bobbi_blazer Registered User Join Date: Oct 2004 Location: Texas Posts: 105	Thanks C-1072 I really appreciate it. If you aren't clear about what I need, I can send you a picture or try to clearify. Sometimes my descriptions aren't the greatest. __________________ Thank you Bobbi See my Blazer Restro Pictures HERE

12-08-2004, 06:31 PM	#4
tim_and_bobbi_blazer Registered User Join Date: Oct 2004 Location: Texas Posts: 105	Anybody Getting ready to start paint prep and really need to get these parts in so if anybody has them, let me know __________________ Thank you Bobbi See my Blazer Restro Pictures HERE

12-11-2004, 08:45 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	I may have the nut plate let me look around you can have it if I find em.... P.m. me you addy and I get them shipped. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-21-2004, 09:25 PM	#6
tim_and_bobbi_blazer Registered User Join Date: Oct 2004 Location: Texas Posts: 105	Thanks Luke Got it today. Thanks again __________________ Thank you Bobbi See my Blazer Restro Pictures HERE

12-22-2004, 10:42 AM	#7
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	No problem.. I would like to see what you guys do to get the plate in there though as I have the same thing I need to do to mine.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-22-2004, 10:17 PM	#8
tim_and_bobbi_blazer Registered User Join Date: Oct 2004 Location: Texas Posts: 105	repair Tim will do this one. He says 'I'm going to cut a #$@#$ hole under the dash, work the nut plate into the post, and weld the $%!@$# hole back up. Then, I'm going to let you paint the #@$@#$ patch. It will be a while before he gets around to doing it though. We are moving in a few days and with Christmas, we have a full plate. Thank you so much for the part. __________________ Thank you Bobbi See my Blazer Restro Pictures HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.