|
01-14-2005, 12:36 AM
|
#1 |
|
Registered User
Join Date: Dec 2004
Location: Jacksonville, FL
Posts: 84
|
Wiper motor rust....
Anybody ever have the entire mounting metal around the wiper motor rust out? Is there a replacement panel for this, or am I pretty much on my own, either rebuild or buy new? I've not started taking it apart to find out what's REALLY involved in it, but it looks to be not fun.
__________________
1969 Chevrolet C-10 Bananamobile. Yes, it's ugly, yes, it's rusty, it's slow too, but no, I'm not trying to show it. |
|
|
|
01-14-2005, 07:44 AM
|
#2 |
|
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
You have two options since there are no patch panels. New cab or cut a section from a donor cab and weld it in as long as the rest of the cowl area isn't that bad.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.   
|
|
|
|
|
01-14-2005, 11:08 AM
|
#3 |
|
Registered User
Join Date: Dec 1999
Location: BRADENTON FLA
Posts: 3,269
|
It's a fairly common problem i guess because we have shipped over 30 of these sections in the last couple of years.
__________________
Rest in Peace Ed. Thanks for all the good times. |
|
|
|
|
01-14-2005, 03:39 PM
|
#4 |
|
Registered User
Join Date: Dec 2004
Location: Jacksonville, FL
Posts: 84
|
the upper part of the cab where the heater bolts in is rusted out, nearly gone...the floor of the cab's got rust (I could floorpan it, but it sounds like I need a new cab and be done with it)
__________________
1969 Chevrolet C-10 Bananamobile. Yes, it's ugly, yes, it's rusty, it's slow too, but no, I'm not trying to show it. |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
