hiding wires - The 1947 - Present Chevrolet & GMC Truck Message Board Network

the-parts-guy · 01-20-2005, 08:23 PM

what is the best way to run the wires from the doors to the cab and still look good

68LSS1 · 01-20-2005, 09:07 PM

From Painless:

the-parts-guy · 01-21-2005, 03:07 AM

thats where i seen them but i never new where or what they were called will they work on the 67-72 trucks with out to much problems

69 Short Fleet · 01-21-2005, 05:53 AM

cool idea! thanks for sharing, Doug

Blue Beard · 01-21-2005, 08:58 AM

Doug.....do those have to be lined up exact?

smokekiki · 01-21-2005, 09:11 AM

Yes,they have to be lined up.The brass contacts need to touch so the power flows.If they are out of line one post might make contact with two on the other side,and then short out.

smokekiki · 01-21-2005, 09:27 AM

You can get these from summit for $60.

Bowtiefreak · 01-21-2005, 10:54 AM

Quote:

Originally Posted by smokekiki

You can get these from summit for $60.

Do you have a name or part number for those?

chickenwing · 01-21-2005, 11:25 AM

Quote:

Originally Posted by Bowtiefreak

Do you have a name or part number for those?

I am interested in these too. I need to replace my door hinges and with these it will not matter.

smokekiki · 01-21-2005, 11:29 AM

Summit part #ELI-94201,made by electric-life.$60 per pair

01-20-2005, 08:23 PM	#1
the-parts-guy Registered User Join Date: Oct 2004 Location: wakaw,sk,canada Posts: 42	hiding wires what is the best way to run the wires from the doors to the cab and still look good

01-20-2005, 09:07 PM	#2
68LSS1 Registered User Join Date: Dec 2002 Location: Tampa Posts: 1,191	From Painless: __________________ '68 Short Step LS1/T56, Hydratech, Fatman Fabrications Stage III, Baer, Hot Rods to Hell, US Body, S&W, etc

01-21-2005, 08:58 AM	#5
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Doug.....do those have to be lined up exact? __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

01-21-2005, 09:11 AM	#6
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,474	Yes,they have to be lined up.The brass contacts need to touch so the power flows.If they are out of line one post might make contact with two on the other side,and then short out. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

01-21-2005, 09:27 AM	#7
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,474	You can get these from summit for $60. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

01-21-2005, 03:07 AM	#3
the-parts-guy Registered User Join Date: Oct 2004 Location: wakaw,sk,canada Posts: 42	thats where i seen them but i never new where or what they were called will they work on the 67-72 trucks with out to much problems

01-21-2005, 05:53 AM	#4
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	cool idea! thanks for sharing, Doug

01-21-2005, 11:29 AM	#10
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,474	Summit part #ELI-94201,made by electric-life.$60 per pair __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.