TABCO? good Quality - The 1947 - Present Chevrolet & GMC Truck Message Board Network

me3 · 01-23-2005, 07:56 PM

Rockers and cab corners local guy says thats what he keeps in stock. supose to be oem quality.

Sweet72 · 01-23-2005, 08:13 PM

I have used the tabco cab floors, floor supports, cab corners, kick panels and pillar patch panels, they were galvanized steel. All the Tabco parts I used fit well and said they're made in USA.

687980chevy · 01-24-2005, 04:32 AM

I bought a 5 piece set from jc whitney they are tabco,fit very well. 73-87 are about $60 bucks,a little more for 67-72's. Made in USA.

MOTHERTRUCKERS · 01-24-2005, 06:06 AM

If they have repaired the tooling on the rockers and cab corners for 67-72's they are pretty good quality. I started out selling TABCO and still buy odds and ends from them.

bobs409 · 01-24-2005, 09:29 AM

I used the Tabco rockers and I got them from J.C. Whitney. I have no complaints. Felt nice and heavy and fit perfect. They did say made in the U.S.

c-1072 · 01-24-2005, 12:50 PM

I used the cab supports not exact match but the quality of the parts where great . Made in the usa a plus anytime .

Neal70C10 · 01-24-2005, 08:59 PM

I ordered some bed floor halves before Thanksgiving. Still not here yet. The folks are nice. We'll see about the quality when/if they get here

Neal

me3 · 01-24-2005, 11:10 PM

thanks guys, I think ill give them a try but im going to elimenate my middle man he's making too much money off them.

01-23-2005, 07:56 PM	#1
me3 hart Join Date: Jul 2004 Location: hell nebraska Posts: 115	TABCO? good Quality Rockers and cab corners local guy says thats what he keeps in stock. supose to be oem quality.

01-23-2005, 08:13 PM	#2
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Tabco patch panels I have used the tabco cab floors, floor supports, cab corners, kick panels and pillar patch panels, they were galvanized steel. All the Tabco parts I used fit well and said they're made in USA. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. Last edited by Sweet72; 01-23-2005 at 08:16 PM.

01-24-2005, 04:32 AM	#3
687980chevy Registered User Join Date: Feb 2004 Location: Hilly Southern Indiana! Posts: 201	I bought a 5 piece set from jc whitney they are tabco,fit very well. 73-87 are about $60 bucks,a little more for 67-72's. Made in USA. Attached Images __________________ 68 K-10,79 K-10,80 C-30 57 chevy convertible 79 Z28

01-24-2005, 06:06 AM	#4
MOTHERTRUCKERS Registered User Join Date: Dec 1999 Location: BRADENTON FLA Posts: 3,269	If they have repaired the tooling on the rockers and cab corners for 67-72's they are pretty good quality. I started out selling TABCO and still buy odds and ends from them. __________________ Rest in Peace Ed. Thanks for all the good times.

01-24-2005, 09:29 AM	#5
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	I used the Tabco rockers and I got them from J.C. Whitney. I have no complaints. Felt nice and heavy and fit perfect. They did say made in the U.S. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

01-24-2005, 12:50 PM	#6
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	Tabco I used the cab supports not exact match but the quality of the parts where great . Made in the usa a plus anytime .

01-24-2005, 08:59 PM	#7
Neal70C10 Registered User Join Date: Dec 2004 Location: Clarksville, Tn Posts: 17	I ordered some bed floor halves before Thanksgiving. Still not here yet. The folks are nice. We'll see about the quality when/if they get here Neal __________________ 70 C/10 400 SBC Bowtie Overdrive Level 3 700R4

01-24-2005, 11:10 PM	#8
me3 hart Join Date: Jul 2004 Location: hell nebraska Posts: 115	thanks guys, I think ill give them a try but im going to elimenate my middle man he's making too much money off them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.