Quadrajet Install Update

[skokie]

Well I managed to get the qjet installed. The metal fuel line didnt work so I used my old holley setup except with a new 5 inch section of rubber fuel line. So it goes 4 inch metal line from the carb to a 5 inch rubber piece going to the metal line into the fuel pump. This way there are no new lines needed. I need to see if I can find a metal fuel line that has a 3/8 for the carb side and a 5/16 for the pump. The carb shop had the carb running really rich so I closed one side at a time until it started missing then backed off a full turn. I got some driving in it to do to see if that is too rich.

Thanks for the help guys.