Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
02-08-2005, 06:34 PM | #1 |
Listening since '86
Join Date: Sep 2001
Location: Canada
Posts: 1,799
|
Need rad hose help - any ideas??
Okay guys, I've seen these floating around in the past few months, and have tried to copy down the information I saw, onto paper - knowing that I would have to deal with it sooner or later. I am looking to replace the lower radiator hose on my truck, but as posted before, this is starting to be a headache! My truck is a 1971 GMC ½ ton with the 5.7L 350. I've copied down a number from an earlier post, checked it out on the napa auto parts website, and sure enough, the same part/part number came up.
(part#PBH4207463) or: http://www.napaonline.com/cgi-bin/nc...grpid=80213817 Anyway, so I go and get this part, as the angles of the hose seem to be correct, and as mentioned in an earlier post, with some cutting, it should fit. Well in my application it will not! The frame is getting in the way. What I did was then take the hose off the truck, brought it to the parts store, and they said they have no idea what the hose could be off of?? (their computer and books say the same part mentioned above) As far as I can measure, it looks to be 1 5/8" inside diameter, but it just may be stretched out as the hose is very old!! My question is, do you recognize this hose??: (it's the one off my truck)
__________________
2007 Saturn Aura - hey it WAS a GM product Last edited by JoetheMobster; 02-08-2005 at 06:36 PM. |
02-08-2005, 08:25 PM | #2 |
member #16
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Did you see this post. Hose for long pump?
http://207.44.196.117/vboard/showthr...+radiator+hose On my truck it was very close to the frame but it cleared. If you have short pump I have no idea. Good luck John
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/ |
02-08-2005, 08:38 PM | #3 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
It looks like your radiator has the straight outlet on it instead of the one that angles up. The 67-72 radiators have the lower outlets angled up.
Jim |
02-08-2005, 10:03 PM | #4 | |
Registered User
Join Date: Oct 2004
Location: Walker Co. Alabama
Posts: 474
|
Quote:
|
|
02-09-2005, 01:17 AM | #5 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Here's the thread about what I did on my 69.
http://67-72chevytrucks.com/vboard/s...highlight=hose Hose is Dayco 70664.
__________________
Fred There is no such thing as too much cam...just not enough engine. |
02-09-2005, 01:32 AM | #6 | |
Listening since '86
Join Date: Sep 2001
Location: Canada
Posts: 1,799
|
Quote:
Thanks for the help guys
__________________
2007 Saturn Aura - hey it WAS a GM product |
|
02-09-2005, 01:36 AM | #7 |
Registered User
Join Date: Oct 2004
Location: saskatoon, planet earth
Posts: 694
|
does your lower rad connection come straight out, or is it on an upward angle. If it's straight out ( like mine is) with a long style water pump you have to use a differnt year hose than the computer will say. ( I made about 20 trips to 3 differnt part stores myself. I feel your pain) If you're lookin for a setup like I have, I got the part#, but it's late & in the garage, & there's lots of snow & i'm in bare feet. I'll get back to ya. good luck.
__________________
I got a bench seat baby, you don't have to sit over there. |
02-09-2005, 12:26 PM | #8 | |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Quote:
I made so many trips to the parts store on that one the owner wanted me to supply him with anti-depressants. And that was the second time I bought that hose. Couldn't figure it out on the first trip.
__________________
Fred There is no such thing as too much cam...just not enough engine. |
|
Bookmarks |
|
|