Where to hook up Battery wire for HEI? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mt Al · 07-22-2002, 11:59 PM

Where do I run the Battery wire for the HEI distributor? Is there a place on the fuse panel?

I suppose this is a stupid question....when my wife came home after hauling lots o' kids around the other day, she shut off the 'burb and it wouldn't start again. I tried when I came home, figuring she'd flooded it. Nope. Tonight I found the "BATT" wire frayed and busted and still can't find the other end of the wire or where it was hooked up. A neighbor (who's a die hard mustang collector, president of the Montana Pony club, etc.) even came over and couldn't find it.

I ran another wire from the + terminal on the battery to the frayed end of the wire from the HEI and it started. I learned that it wouldn't shut off until I unhooked the wire. Duh. Dumb as a post, here.

Is there a good spot on the fuse box that's on/off with the key?

Thanks very much.

69C10Atl · 07-23-2002, 12:05 AM

I have a wire run the "ign unfused" on my fuse box. Come to find out the HEI power wire was the only thing keeping my truck from running when I bought it.

Blue_71 · 07-23-2002, 12:09 AM

69c10atl is right, ign unfused is a really good spot to run it, but radio, and cigerate lighter connection places will work too (12 volts with key on, i checked them with a voltmeter)

frost89434 · 07-23-2002, 01:08 AM

Thats where I got mine

mt Al · 07-23-2002, 10:13 AM

Thanks a million. Is this spot easy to find on the box? Do I need a spade thingamajiggy to hook to the wire?

Again, thanks. This board is awesome.

Al

**68 Stepside** · 07-23-2002, 12:09 PM

Yes, a connector to go over a spade thingamajiggy is necessary. Be sure you run about a 10-12 ga. wire (the bigger the better), from the "Bat", to the "IGN Unfused" spot on the box.

You should be in business after that!

TJ

Longhorn Man · 07-23-2002, 05:56 PM

Since it sounds like you were running on the resistance wire that was only giving out 8 or so volts, don't be suprised it it starts/runs better. And maybe even better MPG, if you don't 'enjoy' the newfound power too much.

07-22-2002, 11:59 PM	#1
mt Al Registered User Join Date: Aug 2001 Location: Bozeman, Montana Posts: 243	Where to hook up Battery wire for HEI? Where do I run the Battery wire for the HEI distributor? Is there a place on the fuse panel? I suppose this is a stupid question....when my wife came home after hauling lots o' kids around the other day, she shut off the 'burb and it wouldn't start again. I tried when I came home, figuring she'd flooded it. Nope. Tonight I found the "BATT" wire frayed and busted and still can't find the other end of the wire or where it was hooked up. A neighbor (who's a die hard mustang collector, president of the Montana Pony club, etc.) even came over and couldn't find it. I ran another wire from the + terminal on the battery to the frayed end of the wire from the HEI and it started. I learned that it wouldn't shut off until I unhooked the wire. Duh. Dumb as a post, here. Is there a good spot on the fuse box that's on/off with the key? Thanks very much. __________________ '72 GMC 1/2T 4x4 1500 Super Custom pickup (current) past rides were: '70 Chev 2wd farm truck '71 GMC 2wd 1/2T 402 nice! '72 Chev 2wd 1/2T 396 '72 GMC 3/4T 4x4 2500 Super Custom suburban. Bozeman, Montana

07-23-2002, 01:08 AM	#4
frost89434 Registered User Join Date: Nov 2001 Location: sparks, NV Posts: 1,141	Thats where I got mine __________________ 68 short fleet with 71 front clip 2wd jaguar blue 99 chevy ext cab shrtbed z71 loaded 99 chevy swb fleetside(daily driver) Sparks, Nevada

07-23-2002, 10:13 AM	#5
mt Al Registered User Join Date: Aug 2001 Location: Bozeman, Montana Posts: 243	Thanks a million. Is this spot easy to find on the box? Do I need a spade thingamajiggy to hook to the wire? Again, thanks. This board is awesome. Al __________________ '72 GMC 1/2T 4x4 1500 Super Custom pickup (current) past rides were: '70 Chev 2wd farm truck '71 GMC 2wd 1/2T 402 nice! '72 Chev 2wd 1/2T 396 '72 GMC 3/4T 4x4 2500 Super Custom suburban. Bozeman, Montana

07-23-2002, 12:09 PM	#6
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	Yes, a connector to go over a spade thingamajiggy is necessary. Be sure you run about a 10-12 ga. wire (the bigger the better), from the "Bat", to the "IGN Unfused" spot on the box. You should be in business after that! TJ __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-23-2002, 12:05 AM	#2
69C10Atl Trying to stick with it Join Date: Jul 2002 Location: Atlanta,GA Posts: 115	I have a wire run the "ign unfused" on my fuse box. Come to find out the HEI power wire was the only thing keeping my truck from running when I bought it.

07-23-2002, 05:56 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Since it sounds like you were running on the resistance wire that was only giving out 8 or so volts, don't be suprised it it starts/runs better. And maybe even better MPG, if you don't 'enjoy' the newfound power too much.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.