Insulationg and carpeting - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 03-24-2005, 04:56 PM

This stuff is definitely not heavy but it does adhere on the entire surface with 3M spray on adhesive. I can tell it is a bit quieter when I fire up the engine but again, I'm not expecting it to make a huge difference. Most of the Dynomat type insulation I saw was more than I was willing to spend as sound reduction just isn't that important to me. This was a rubber mat floor cab so even just the carpet is going to be an improvement for me.

**Yukon Jack** · 03-24-2005, 05:01 PM

69 Short Fleet, no plans for a stereo in this one, I actually like driving around without a radio in this truck.

chevymaz · 03-24-2005, 05:09 PM

that looks plum purty

**Tim Christian** · 03-24-2005, 10:10 PM

Looks GREAT!!!!!!!!!!!!!! Mark!!!! Keep up the good work!

**Palf70Step** · 03-24-2005, 10:31 PM

Looking very nice Yukon. It's gittin there.

rmrtndl · 03-24-2005, 11:13 PM

Good Job. Props to you!

weasel29gm · 03-25-2005, 02:29 AM

Lookin' great Yukon!!!!

**GSFMECH** · 03-25-2005, 03:22 AM

I put that very insulation in my 72 and it made a big difference in heat and sound. It really tightened up the old truck. Another thing that helps as far as sound is I have had these trucks with and without headliners and without the headliner it makes it sound like you are inside a tin can. It helps believe it or not when you have a headliner as the noise gets absorbed alot better instead of echoing around in there. You are going to like the difference that insulation makes.
Mike

67chev · 03-25-2005, 06:28 AM

Looks awesome! I used some stuff called FatMat...that is what someone up above was asking about (I think)...costs $100 and I did 3 layers on the floor/firewall, 2 layers up the back of the cab, and 1 layer in the doors...still gave some away after all that. Haven't run the truck yet but I am sure it will be a huge difference than stock.

LUV2XCLR8 · 03-25-2005, 07:43 AM

Quote:

Originally Posted by shifty

I read in another thread where someone got Dynamat in a very large amount for around $100.

IF THAT WAS LAST YEAR IT WAS ME, I SOLD TO LARGE BOXES TO A
MEMBER OUT IN CALI FOR A MERE $100 SHIPPED, FUNNY THING IS, I
TRIED TO SELL IT ON HERE FOR LIKE A MONTH, NO ONE WANTED IT.

HEY YJ, THAT THING IS BAD A$$, LOOKS REALLY GOOD BUDDY

Striker169 · 03-25-2005, 12:02 PM

Quote:

Originally Posted by LUV2XCLR8

IF THAT WAS LAST YEAR IT WAS ME, I SOLD TO LARGE BOXES TO A
MEMBER OUT IN CALI FOR A MERE $100 SHIPPED, FUNNY THING IS, I
TRIED TO SELL IT ON HERE FOR LIKE A MONTH, NO ONE WANTED IT.

HEY YJ, THAT THING IS BAD A$$, LOOKS REALLY GOOD BUDDY

dam you cant get anymore can you

**Yukon Jack** · 04-21-2005, 09:52 AM

Here are the brackets I am using under the floor to attempt to reinforce the floor - they tie into the brackets above the floor.

mocwon · 04-21-2005, 02:17 PM

Real nice, clean looking job!!!

Bram · 04-21-2005, 03:26 PM

Lookin good Yukon!
Are you ready to fire that Big Block up yet?

**Yukon Jack** · 04-21-2005, 03:35 PM

Already fired up linky to wav file now I'm just dying to drive it!

Bram · 04-21-2005, 03:47 PM

Oh man your killing me! I'm still a least two weeks out before I can fire my beast up!?!?
Keep up the good work; you’re on the home stretch now.

fishmunger · 04-21-2005, 08:46 PM

I bought some stuff called "fatmat" off of ebay. it is the same as dynamat and 100ft^2 cost $130 shipped. It is enough to fully do 2 cabs in about 2 or 3 layers thick. I did it on my 81.

03-24-2005, 04:56 PM	#26
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	This stuff is definitely not heavy but it does adhere on the entire surface with 3M spray on adhesive. I can tell it is a bit quieter when I fire up the engine but again, I'm not expecting it to make a huge difference. Most of the Dynomat type insulation I saw was more than I was willing to spend as sound reduction just isn't that important to me. This was a rubber mat floor cab so even just the carpet is going to be an improvement for me. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-24-2005, 05:01 PM	#27
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	69 Short Fleet, no plans for a stereo in this one, I actually like driving around without a radio in this truck. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

03-24-2005, 05:09 PM	#28
chevymaz What are you looking at? Join Date: Jul 2003 Location: Kellyville,Oklahoma Posts: 308	that looks plum purty __________________ 1971 GMC LWB 2005 Honda Element 2007 Honda Fit

03-24-2005, 10:31 PM	#30
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,220	Looking very nice Yukon. It's gittin there. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-24-2005, 11:13 PM	#31
rmrtndl Hey ya'll, Watch this! Join Date: Jan 2005 Location: Huntsville, AL Posts: 117	Good Job. Props to you! __________________ Rick M. 72 GMC SWB Fleetside 25 Chevrolet Superior Series Truck 95 Mazda Miata 06 Dodge Charger RT http://ram92.ods.org/blog.html

03-24-2005, 10:10 PM	#29
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Looks GREAT!!!!!!!!!!!!!! Mark!!!! Keep up the good work!

03-25-2005, 02:29 AM	#32
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Lookin' great Yukon!!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

03-25-2005, 03:22 AM	#33
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 818	I put that very insulation in my 72 and it made a big difference in heat and sound. It really tightened up the old truck. Another thing that helps as far as sound is I have had these trucks with and without headliners and without the headliner it makes it sound like you are inside a tin can. It helps believe it or not when you have a headliner as the noise gets absorbed alot better instead of echoing around in there. You are going to like the difference that insulation makes. Mike __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

03-25-2005, 06:28 AM	#34
67chev Registered User Join Date: Apr 2004 Location: Spokane, WA Posts: 458	Looks awesome! I used some stuff called FatMat...that is what someone up above was asking about (I think)...costs $100 and I did 3 layers on the floor/firewall, 2 layers up the back of the cab, and 1 layer in the doors...still gave some away after all that. Haven't run the truck yet but I am sure it will be a huge difference than stock. __________________ "SicStee8" Chevy SWB Fleetside, in progress...500 HP 383 w/TriPower, 700r4, 3.73's, Lowered, Shaved Driprail/sidemarkers/handles/ant, Gonna rock!! '96 Chevy Tahoe 4X4 '84 Chevy C/K10 4X4 (FOR SALE)

04-21-2005, 09:52 AM	#37
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Here are the brackets I am using under the floor to attempt to reinforce the floor - they tie into the brackets above the floor. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 11:12 AM.

04-21-2005, 02:17 PM	#38
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	Real nice, clean looking job!!! __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

04-21-2005, 03:26 PM	#39
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Lookin good Yukon! Are you ready to fire that Big Block up yet? __________________ 72CheyenneSuper1ton4x4BigBlock

04-21-2005, 03:35 PM	#40
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Already fired up linky to wav file now I'm just dying to drive it! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 11:12 AM.

04-21-2005, 03:47 PM	#41
Bram Broke Join Date: Aug 2001 Location: West Plains,MO Posts: 385	Oh man your killing me! I'm still a least two weeks out before I can fire my beast up!?!? Keep up the good work; you’re on the home stretch now. __________________ 72CheyenneSuper1ton4x4BigBlock

04-21-2005, 08:46 PM	#42
fishmunger Registered User Join Date: Jan 2005 Location: CA Posts: 411	I bought some stuff called "fatmat" off of ebay. it is the same as dynamat and 100ft^2 cost $130 shipped. It is enough to fully do 2 cabs in about 2 or 3 layers thick. I did it on my 81.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.