![]() |
![]() |
#1 |
Senior Member
![]() Join Date: Dec 2000
Location: Magnolia, Arkansas
Posts: 1,091
|
![]()
I've got a '69 327(in the blazer) the guy said was out of a '69 Impala(I think). The motor runs good and I was wanting to know if there was anything special about the motors, i.e. Did they make suped-up models from the factory etc. The thing has a 2 bbl. and the fella said with a 4 bbl it was rated at over 300hp factory. Any truth to this? Anyone know much about these motors? Any help is appreciated.
Thanks, Matthew
__________________
GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
![]()
Yes, the 4 barrel, with fuelie heads(1.94/1.5 valves )was rated @ 300hp. there were some that were hotter,L79/350hp with a hydraulic cam(Nova),365 hp Vette,& 375hp vette(fuel injected). Both had solid cams,& 2.02/1.6 valves.....69 longhorn
__________________
http://community.webshots.com/user/hotrodhorn |
![]() |
![]() |
![]() |
#3 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
![]()
If you post the #'s off the front of the block, on the horizontal pad in front of the passenger side head, some one on here can decode it for you and tell you EXACTLY what it is.
------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio |
![]() |
![]() |
![]() |
#4 |
Senior Member
![]() Join Date: Dec 2000
Location: Magnolia, Arkansas
Posts: 1,091
|
![]()
I'll get the digits tomorrow and post them here. thanks
__________________
GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles |
![]() |
![]() |
![]() |
#5 | |
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,283
|
![]() ![]() [This message has been edited by Blue_71 (edited April 14, 2002).]
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
![]() |
|
![]() |
![]() |
![]() |
#6 |
Thats just prime!
Join Date: Mar 2002
Location: TEXAS
Posts: 720
|
![]()
thats a good drawing blue, i can't help but to get hungry just looking at your front view of the engine. it looks as if you are cookings eggs where the timing chain is. Sunny side up? lol,jk
__________________
*69 GMC short bed stepside with a wimpy six that can barely pull itself. *99 Chevrolet Camaro Z-28 1 Bad 5.7ltr LS1 |
![]() |
![]() |
![]() |
Bookmarks |
|
|