Horn Question. I Need Help

[modifiedGMC]

I got a 1969 GMC with standard column and I need to get my horn to work. Where is the horn relay located? The previous owner had a push button mounted in the instrument panel and it looked like crap! I want to get it back onto the column where it's supposed to be but ineed to locate the relay. If a van tilt column is installed does all the wiring match up and the horn work? My problem may be in the column itself.

[Longhorn Man]

the relay is right by the fuse panel...above and to the left I think.
As for the van tilt...electricly, the only thing that needs addressed, normally you need an adapter for the harness, and there is a single wire you hook to the fuse box for the shift indicator lamp.

[kaycee]

I just put a newer type steering wheel (94)on my van tilt and the wheel stuc out to far from colum.The tilt I have has a nut behind that holds the shaft together,the threads stuck out a little bit farther then the splines that hold the wheel on .I took a grinder and knocked the threads off about a 1/4" back from splines and now the wheel sits close to colum like it should. JUST A FYI and the harness adapter is all u need