Bought my Serpentine setup today! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 05-20-2005, 07:24 PM

Got my serpentin esetup today at the Pull-a-Part in Nashville. Got it all for $80. After all that I hope it works and is the right setup. Thanks to bisquick, Putter, and Gman69, for their help. The only problem I have is on the second pic is the small cut on the PS Pulley. I guess I'll have to find another one.

Thanks guys,

Bryan

RainFade · 05-20-2005, 07:52 PM

being a cheap S.O.B. i'd try dressing that pulley with some small files before I replaced it.

**Palf70Step** · 05-20-2005, 08:04 PM

Good haul there Bryan. Like Rainfade said you maybe able to clean that pulley up. That setup will look real good on yours. Soooooo, is your's home yet???

68w/sbc406 · 05-20-2005, 08:05 PM

^good question

5150 · 05-20-2005, 08:49 PM

Hell No!!!!!!! Went and saw it today. Nothing changed. I think the glove box got put in.

*screamin_c102* · 05-20-2005, 08:53 PM

gotta llllllllluuuuuuuuuuuuuvvvvvvvvvvvvv body shops

Nice serp set yellow69

*72CSTC5* · 05-20-2005, 09:15 PM

If I am not mistaken look at a new one and it will probably be the same. For some reason I use to encounter these in collision repairs and we thought the same thing and after we bought a new one we noticed the same mark. Check and make sure though, I could be wrong about this but it's what I remember.

mocwon · 05-21-2005, 07:55 AM

The AC compressor side looks like the one I bought but for some reason the power steering side looks different. It shouldn't matter though if it came off an 8-cylinder GM. You will probably need to drill and tap a 3/8" X 16 hole about 1/2" deep in the passenger side head for the bolt hole just under the AC compressor. Great find for $80; these setups typically bring $200 or more.

tmcgrawlookalike · 05-21-2005, 08:05 AM

there is nothing wrong with that p/s pulley!!!!!!!!

tmcgrawlookalike · 05-21-2005, 08:14 AM

you are using original year p/s gear box?that pump will have o-ring fitting in back of it,and gear box will have flare type fitting.change out fitting in back of pump to older style if so.your changing w/p and fan both to reverse rotation also right?sure is alot of work just to have serp set-up,and i don`t think it is very beneficial,but,that`s my opinion.good luck!

5150 · 05-21-2005, 08:27 AM

After seeing George's(Gman69) at Pigeon Forge I wanted one. It was just a nice clean look and gave it a newer look also. I got it off a 4.3 V6 Blazer. Bisquick said that's what he got his off of. I have no idea how to put it on, but when I don't have a truck right now I figure it out later.

5150 · 05-21-2005, 10:07 AM

Are you saying I need to go back and get the fan?

Russell · 05-21-2005, 12:38 PM

yeah, the fan is a reverse rotation as well.

I am always hearing people say that you can change the fittings from the back of a power steering box. How do you do that?

As far as I can tell, the fittings are moulded right into the housing of the box... Do you just pull the whole top of and put an o-ring style top on or something?

5150 · 05-21-2005, 12:55 PM

will the fan fit okay in our shrouds? Just making sure

68w/sbc406 · 05-21-2005, 01:00 PM

Quote:

Originally Posted by Russell

I am always hearing people say that you can change the fittings from the back of a power steering box. How do you do that?

As far as I can tell, the fittings are moulded right into the housing of the box...

they unscrew

**Palf70Step** · 05-21-2005, 04:01 PM

Bryan
Go with an electric setup like george and putter's. It'll look a lot cleaner and no worries about shroud clearance.

5150 · 05-21-2005, 05:52 PM

Bill,

I'm thinking about that Nissan setup that is over on the FAQ page about the Altima and Stanza's. I'll have to see if I can find one at the pull-a-part

tmcgrawlookalike · 05-21-2005, 05:58 PM

Quote:

Originally Posted by Russell

yeah, the fan is a reverse rotation as well.

I am always hearing people say that you can change the fittings from the back of a power steering box. How do you do that?

As far as I can tell, the fittings are moulded right into the housing of the box... Do you just pull the whole top of and put an o-ring style top on or something?

not the box,the pump.and it will just be for the pressure side hose.

neonlarry · 05-21-2005, 06:07 PM

Both the fan and water pump are reverse rotation.
The fans usually (there are lots of different setups) will not fit our shrouds, you will need a big block fan shroud.

Russell · 05-21-2005, 06:18 PM

Quote:

Originally Posted by tmcgrawlookalike

not the box,the pump.and it will just be for the pressure side hose.

Ohh!

Now ya tell me! LOL I've been hearing people say that I should just change the fittings out, and it has been bugging me something horrible :P This saves me a whole lotta time and money as far as installing the hoses goes, lol

1STtimePRo'71 · 05-21-2005, 06:23 PM

Why serp? Whats the big deal?

5150 · 05-21-2005, 06:28 PM

It just looks better and is probably more efficient. Here's the link to some people who've done it-

http://67-72chevytrucks.com/vboard/s....php3?t=139517

c-1072 · 05-21-2005, 07:53 PM

I have seen that before it may be factory .

**Palf70Step** · 05-21-2005, 09:26 PM

Quote:

Originally Posted by yellow69

Bill,

I'm thinking about that Nissan setup that is over on the FAQ page about the Altima and Stanza's. I'll have to see if I can find one at the pull-a-part

I believe that is what Putter used.

*chevytruckfan* · 05-21-2005, 09:49 PM

Quote:

Originally Posted by yellow69

I got it off a 4.3 V6 Blazer.

What year?

05-20-2005, 07:24 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Bought my Serpentine setup today! Got my serpentin esetup today at the Pull-a-Part in Nashville. Got it all for $80. After all that I hope it works and is the right setup. Thanks to bisquick, Putter, and Gman69, for their help. The only problem I have is on the second pic is the small cut on the PS Pulley. I guess I'll have to find another one. Thanks guys, Bryan Attached Images __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-20-2005, 07:52 PM	#2
RainFade Registered User Join Date: Nov 2004 Location: Central Ohio Posts: 215	being a cheap S.O.B. i'd try dressing that pulley with some small files before I replaced it. __________________ 71 K20 350/350/205, dealer air, 4" lift, Flowtech,Edel 1406 on 2101, procomp HEI,4.10's, 33x12.50x16.5 BFG MT's on slots. 4 wheel disc brakes. My lame K20 page My lame Eaton disc brake page

05-20-2005, 08:04 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Good haul there Bryan. Like Rainfade said you maybe able to clean that pulley up. That setup will look real good on yours. Soooooo, is your's home yet??? __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

05-20-2005, 08:05 PM	#4
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	^good question __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler

05-20-2005, 08:49 PM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Hell No!!!!!!! Went and saw it today. Nothing changed. I think the glove box got put in. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 05-20-2005 at 08:50 PM.

05-20-2005, 08:53 PM	#6
screamin_c102 Account Suspended Join Date: Feb 2005 Location: Yoncalla Oregon Posts: 775	gotta llllllllluuuuuuuuuuuuuvvvvvvvvvvvvv body shops Nice serp set yellow69

05-20-2005, 09:15 PM	#7
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	If I am not mistaken look at a new one and it will probably be the same. For some reason I use to encounter these in collision repairs and we thought the same thing and after we bought a new one we noticed the same mark. Check and make sure though, I could be wrong about this but it's what I remember.

05-21-2005, 07:55 AM	#8
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	The AC compressor side looks like the one I bought but for some reason the power steering side looks different. It shouldn't matter though if it came off an 8-cylinder GM. You will probably need to drill and tap a 3/8" X 16 hole about 1/2" deep in the passenger side head for the bolt hole just under the AC compressor. Great find for $80; these setups typically bring $200 or more. __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire.....

05-21-2005, 08:05 AM	#9
tmcgrawlookalike Registered User Join Date: Jun 2004 Location: warr acres,oklahoma Posts: 650	there is nothing wrong with that p/s pulley!!!!!!!!

05-21-2005, 08:14 AM	#10
tmcgrawlookalike Registered User Join Date: Jun 2004 Location: warr acres,oklahoma Posts: 650	you are using original year p/s gear box?that pump will have o-ring fitting in back of it,and gear box will have flare type fitting.change out fitting in back of pump to older style if so.your changing w/p and fan both to reverse rotation also right?sure is alot of work just to have serp set-up,and i don`t think it is very beneficial,but,that`s my opinion.good luck!

05-21-2005, 08:27 AM	#11
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	After seeing George's(Gman69) at Pigeon Forge I wanted one. It was just a nice clean look and gave it a newer look also. I got it off a 4.3 V6 Blazer. Bisquick said that's what he got his off of. I have no idea how to put it on, but when I don't have a truck right now I figure it out later. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-21-2005, 10:07 AM	#12
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Are you saying I need to go back and get the fan? __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-21-2005, 12:38 PM	#13
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	yeah, the fan is a reverse rotation as well. I am always hearing people say that you can change the fittings from the back of a power steering box. How do you do that? As far as I can tell, the fittings are moulded right into the housing of the box... Do you just pull the whole top of and put an o-ring style top on or something? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

05-21-2005, 12:55 PM	#14
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	will the fan fit okay in our shrouds? Just making sure __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-21-2005, 04:01 PM	#16
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Bryan Go with an electric setup like george and putter's. It'll look a lot cleaner and no worries about shroud clearance. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

05-21-2005, 05:52 PM	#17
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Bill, I'm thinking about that Nissan setup that is over on the FAQ page about the Altima and Stanza's. I'll have to see if I can find one at the pull-a-part __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-21-2005, 06:07 PM	#19
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Both the fan and water pump are reverse rotation. The fans usually (there are lots of different setups) will not fit our shrouds, you will need a big block fan shroud. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

05-21-2005, 06:23 PM	#21
1STtimePRo'71 Registered User Join Date: Feb 2005 Location: Lake Crystal, MN Posts: 656	Why serp? Whats the big deal? __________________ -Cory 1967 2 Wheel Chevy

05-21-2005, 06:28 PM	#22
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	It just looks better and is probably more efficient. Here's the link to some people who've done it- http://67-72chevytrucks.com/vboard/s....php3?t=139517 __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-21-2005, 07:53 PM	#23
c-1072 Registered User Join Date: Sep 2004 Location: rochester NY Posts: 777	cut in pully I have seen that before it may be factory .

Register or Log In To remove these advertisements.