FS or trade: AC cab, Bay Area, CA $200 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

greenhorn male · 06-22-2005, 03:52 PM

Uncut dash. Rockers, corners, roof, firewall, supports look clean. The passenger side floor has a 1/2" x 5" rust area (#1) near the front door opening. The rust hole is not that big now but about that much metal would need cutting out. About 5" of the door gasket lip also rusted off (#2) on the passenger near the back of the door opening. Drivers side has a 1/2" rust hole (#3) near the front door opening also. Several other holes on floor need to be patched from different bucket seats at one time or another. Also, just noticed a small dent on rear passenger corner. This is a bare cab. No glass. No title. No vin. It is on a rolling stand for easy inspection. I had some interest a while back but here it is still for sale to first person that could pick it up soon.
May trade for anything interesting, just can't think of anything I need now.
*Also, Please respond in this thread only for dibbs*

RicksTrucks · 06-22-2005, 03:56 PM

Too far for me, but for others - what year is the cab?

greenhorn male · 06-22-2005, 03:58 PM

Quote:

Originally Posted by RicksTrucks

Too far for me, but for others - what year is the cab?

"1972 C20, Camper Special"

Putter · 06-22-2005, 03:59 PM

Man....why couldn't that be "Bay-St. Louis" Mississippi????? Oh, the humanity!?!?!

greenhorn male · 06-24-2005, 01:35 AM

more pics

qksilver · 06-24-2005, 02:07 AM

I would be interested..........but I am leaving on a road trip in a few hours............I am going to PM you with my cell phone. Have to figure out how to ship it to NC, The only problem with me buying it.

unixadm · 06-24-2005, 12:01 PM

Does it come with the title?

RicksTrucks · 06-24-2005, 12:17 PM

From first post

Quote:

Originally Posted by greenhorn male

Uncut dash. Rockers, corners, roof, firewall, supports look clean. The passenger side floor has a 1/2" x 5" rust area (#1) near the front door opening. The rust hole is not that big now but about that much metal would need cutting out. About 5" of the door gasket lip also rusted off (#2) on the passenger near the back of the door opening. Drivers side has a 1/2" rust hole (#3) near the front door opening also. Several other holes on floor need to be patched from different bucket seats at one time or another. Also, just noticed a small dent on rear passenger corner. This is a bare cab. No glass. No title. No vin. It is on a rolling stand for easy inspection. I had some interest a while back but here it is still for sale to first person that could pick it up soon.
May trade for anything interesting, just can't think of anything I need now.
*Also, Please respond in this thread only for dibbs*

**Palf70Step** · 06-24-2005, 12:53 PM

Quote:

Originally Posted by Putter

Man....why couldn't that be "Bay-St. Louis" Mississippi????? Oh, the humanity!?!?!

It wouldn't have mattered Putter cuz it would have been at my house already.

MrGoodpliers · 06-24-2005, 01:15 PM

Man, that's a nice cab for $200.

greenhorn male · 06-24-2005, 11:13 PM

Quote:

Originally Posted by qksilver

I would be interested..........but I am leaving on a road trip in a few hours............I am going to PM you with my cell phone. Have to figure out how to ship it to NC, The only problem with me buying it.

Sorry qksilver, I'd rather not deal with shipping something this large. After the posts about truck shipping problems, you may not want to either.

unixadm... issues with the title is one of the reasons I decided to part this truck.

greenhorn male · 06-27-2005, 11:23 PM

TTT with under body pics. The first 2 pics is the underside of rust spot #1 in above picture. The 3rd and fourth pics are the driver side, from behind and front. I just noticed the drivers side has an extra under floor brace midway of the door opening. I also looked at the cab corners from the inside and didn't see any dents or bondo from inside.

greenhorn male · 07-05-2005, 12:44 PM

Still available

*FormerMember* · 07-07-2005, 07:55 AM

I could also pick this up and deliver it... I am almost tempted to grab it.

Can you PM me contact information?

greenhorn male · 07-07-2005, 01:03 PM

Quote:

Originally Posted by grendel

I could also pick this up and deliver it... I am almost tempted to grab it.

Can you PM me contact information?

PM sent

HOTFUN · 07-07-2005, 07:09 PM

grendel

Shoot me a price on this cab with delivery. I am right off I-80 at the York, Nebraska interchange #353 and 3 miles south on Highway 81. Very easy to get to and no traffic out here and I have a Bobcat to unload it with. I am interested.
Thanks
Mark

greenhorn male · 09-03-2005, 06:13 PM

Hey, I still have the cab. I removed the odd looking brace, which turned out to be a shield for the auxilliary gas line that attaches to the under cab 3-way valve, found on trucks with factory auxilliary gas tanks. The last two pics show what the brace looks like and an underbody shot without the shield. The shield is now going in my camper special with dealer installed aux tank. Ah! Another rare additon on my truck, LOL.
Anyway the red circles show where the shield was screwed on with self tapping screws. The green circle is the gas valve mounting holes. The blue circle is where after market seats were ripped out of the floor. There s a hole similar on the passenger side. The rest of the holes are drilled holes and not torn like the two.

Anyway, someone come pick this up for $175. You could have the dolly under it, minus the wheels (I borrowed the wheels from my moving dolly).

**RPOZ11** · 09-04-2005, 07:35 PM

You still have this cab????
If so, please email me! Or PM me and Ill call you!

greenhorn male · 09-05-2005, 04:10 AM

I'll call you. I'm having cmputer problems and may be offline until I get this problem fixed or buy a new computer.

greenhorn male · 09-10-2005, 04:53 AM

RPOZ11 took the road trip from SoCal to NorCal and picked it up Friday afternoon. It was nice meeting you and hope you made it back ok.

stllookn · 09-10-2005, 09:24 AM

greenhorn, what are the odds of getting an engineering drawing of that cover?

**RPOZ11** · 09-10-2005, 11:23 AM

Thanx! Greenhorn!
That drive about killed me, I feel like Ozzy after a good whoopin'!

**RPOZ11** · 09-10-2005, 03:31 PM

I am going to place this back on my C20, will be needing the SB stuff to get it right.
What is my truck worth as a roller, apart but complete?
I have a 350 block being made into a 4-bolt main, eng stands etc etc + misc everything else, interior, doors, 14-Bolt rear axle, PB, AC, AM, seat, currently has a side tool box bed and is the same green.
She's a project I am attempting to bring back to the road.

**RPOZ11** · 09-10-2005, 05:32 PM

I must once again share my thoughts of thanx to all of you who contribute your ideas on this site!
I borrowed an idea and tried it myself.
It took me all of 20 minutes to remove the cab from my bed to the trailer bed.
Just remember to balance the cab accordingly so that it doesnt slide off!

acloco · 09-10-2005, 09:32 PM

Whoever originally posted the "move the cab around with an engine hoist" idea should patent it....

06-22-2005, 03:59 PM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Man....why couldn't that be "Bay-St. Louis" Mississippi????? Oh, the humanity!?!?! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

06-24-2005, 01:35 AM	#5
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	More pics more pics Attached Images __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays. Last edited by greenhorn male; 06-24-2005 at 01:44 AM.

06-24-2005, 01:15 PM	#10
MrGoodpliers Registered User Join Date: May 2002 Location: Gainesville, Georgia Posts: 704	Man, that's a nice cab for $200. __________________ We made Oklahoma a little after 3, Randy & his brother Bob & my old GMC...

06-27-2005, 11:23 PM	#12
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	TTT with under body pics. The first 2 pics is the underside of rust spot #1 in above picture. The 3rd and fourth pics are the driver side, from behind and front. I just noticed the drivers side has an extra under floor brace midway of the door opening. I also looked at the cab corners from the inside and didn't see any dents or bondo from inside. Attached Images __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays. Last edited by greenhorn male; 09-03-2005 at 05:58 PM.

07-05-2005, 12:44 PM	#13
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Still available __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

06-22-2005, 03:52 PM	#1
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	FS or trade: AC cab, Bay Area, CA $200 Uncut dash. Rockers, corners, roof, firewall, supports look clean. The passenger side floor has a 1/2" x 5" rust area (#1) near the front door opening. The rust hole is not that big now but about that much metal would need cutting out. About 5" of the door gasket lip also rusted off (#2) on the passenger near the back of the door opening. Drivers side has a 1/2" rust hole (#3) near the front door opening also. Several other holes on floor need to be patched from different bucket seats at one time or another. Also, just noticed a small dent on rear passenger corner. This is a bare cab. No glass. No title. No vin. It is on a rolling stand for easy inspection. I had some interest a while back but here it is still for sale to first person that could pick it up soon. May trade for anything interesting, just can't think of anything I need now. Also, Please respond in this thread only for dibbs Attached Images __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays. Last edited by greenhorn male; 06-24-2005 at 01:30 AM.

06-22-2005, 03:56 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Too far for me, but for others - what year is the cab? __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

06-24-2005, 02:07 AM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	I would be interested..........but I am leaving on a road trip in a few hours............I am going to PM you with my cell phone. Have to figure out how to ship it to NC, The only problem with me buying it.

06-24-2005, 12:01 PM	#7
unixadm Registered User Join Date: Jun 2005 Location: Sacramento, CA Posts: 61	Does it come with the title?

07-07-2005, 07:55 AM	#14
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	I could also pick this up and deliver it... I am almost tempted to grab it. Can you PM me contact information?

07-07-2005, 07:09 PM	#16
HOTFUN Registered User Join Date: Jan 2001 Location: Lincoln, Nebraska Posts: 2,145	grendel Shoot me a price on this cab with delivery. I am right off I-80 at the York, Nebraska interchange #353 and 3 miles south on Highway 81. Very easy to get to and no traffic out here and I have a Bobcat to unload it with. I am interested. Thanks Mark __________________ '66 CST BBW swb fleet 327 fac ac '67 CST 4x4 swb 327 stepside project '72 Cheyenne K20 50k original '72 Cheyenne Super K20 project '73 Sierra swb 4x4 frame off in paint stage '74 Cheyenne Super swb w/16k actual '71 & 72 Cheyenne K10 4x4 swb's '70 426 HEMICUDA conv SHAKER 4 sp Dana 60 '60 Impala conv 327 PG fac ac loaded 3rd owner '72 GMC K2500 4x4 '59 Apache CST BBW fleetside swb 283 '73 ElCamino SS LS1 T56 true SS bucket tach '76 ElCamino SS 52k survivor '87 Grand National 41k True 2nd to last built in 1987. '86 K30 454 SRW fleetside CA since new '88 Trans Am GTA 39k bought new 2018 DEMON plum crazy @ 840HP! "Need for speed"

09-03-2005, 06:13 PM	#17
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	What's this big green thing in my side yard? $175 Hey, I still have the cab. I removed the odd looking brace, which turned out to be a shield for the auxilliary gas line that attaches to the under cab 3-way valve, found on trucks with factory auxilliary gas tanks. The last two pics show what the brace looks like and an underbody shot without the shield. The shield is now going in my camper special with dealer installed aux tank. Ah! Another rare additon on my truck, LOL. Anyway the red circles show where the shield was screwed on with self tapping screws. The green circle is the gas valve mounting holes. The blue circle is where after market seats were ripped out of the floor. There s a hole similar on the passenger side. The rest of the holes are drilled holes and not torn like the two. Anyway, someone come pick this up for $175. You could have the dolly under it, minus the wheels (I borrowed the wheels from my moving dolly). Attached Images __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays. Last edited by greenhorn male; 09-03-2005 at 06:15 PM.

09-04-2005, 07:35 PM	#18
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	You still have this cab???? If so, please email me! Or PM me and Ill call you! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

09-05-2005, 04:10 AM	#19
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	I'll call you. I'm having cmputer problems and may be offline until I get this problem fixed or buy a new computer. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

09-10-2005, 04:53 AM	#20
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Sold RPOZ11 took the road trip from SoCal to NorCal and picked it up Friday afternoon. It was nice meeting you and hope you made it back ok. Attached Images __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays. Last edited by greenhorn male; 09-10-2005 at 04:55 AM.



Register or Log In To remove these advertisements.

09-10-2005, 09:24 AM	#21
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	greenhorn, what are the odds of getting an engineering drawing of that cover? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-10-2005, 11:23 AM	#22
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Thanx! Greenhorn! That drive about killed me, I feel like Ozzy after a good whoopin'! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 09-10-2005 at 11:24 AM.

09-10-2005, 03:31 PM	#23
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	I am going to place this back on my C20, will be needing the SB stuff to get it right. What is my truck worth as a roller, apart but complete? I have a 350 block being made into a 4-bolt main, eng stands etc etc + misc everything else, interior, doors, 14-Bolt rear axle, PB, AC, AM, seat, currently has a side tool box bed and is the same green. She's a project I am attempting to bring back to the road. __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS Last edited by RPOZ11; 09-10-2005 at 03:33 PM.

09-10-2005, 05:32 PM	#24
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Cab Lift I must once again share my thoughts of thanx to all of you who contribute your ideas on this site! I borrowed an idea and tried it myself. It took me all of 20 minutes to remove the cab from my bed to the trailer bed. Just remember to balance the cab accordingly so that it doesnt slide off! Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

09-10-2005, 09:32 PM	#25
acloco Registered User Join Date: Apr 2004 Location: Nebraska Posts: 335	Whoever originally posted the "move the cab around with an engine hoist" idea should patent it....

Register or Log In To remove these advertisements.