Need pictures and info about soft tonneau covers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jason915 · 06-29-2005, 09:34 AM

I want a soft slant side tonneau cover for my b-day this year so I need to know which one I want. I am very picky about how this must fit so please post some pictures of what you have and what brand it is.

I want a cover that covers up the stake pockets completly and goes to the outer edge of the bed rail.

Custom 68 · 06-29-2005, 10:31 AM

I will try to post some pictures I just installed a lund on my SWB fleet I had filled my stake pockets prior to paint but these go out quite a bit on the sides I will post some soon...
Dave

s95930 · 06-29-2005, 10:40 AM

I'll take some pictures of the one I have. It works pretty Good. I am out of town should be back tomorrow.

Jason915 · 06-30-2005, 10:17 AM

Thanks guys

s95930 · 07-01-2005, 09:16 AM

Sorry got Busy Yesterday here are the pictures

Ignore the dirt and the junk in the back. But, that is what the cover is for hide the junk. The last picture shows the frame. It clamps to the bed. And by pulling the pivot pins and the clips for the supports you can lift the rest of the frame and the cover of pretty easy. I think I paid $350 for it installed.

Jason915 · 07-06-2005, 03:13 PM

that is just what I want besides the flip up feature, thanks

Mudder · 07-06-2005, 03:40 PM

Heres the one I have on my ZR2. It has one crossbow and the frame clamps on instead of using any type of fasteners (screws).

phlegm · 07-06-2005, 04:00 PM

I just went through all this a couple of months ago. I have one of the tonneau master covers as well. It is not slant side, I decided I liked the standard better for my needs. It looks just like s95930's slant when down. I love it.

Here is the link to where i found it, Cheapest I could find on the web, most web and local dealers were 100.00 more because they had to special order them for our trucks. these guys sold it to me out of stock for a very reasonable price, free shipping to boot.

http://www.4wheelonline.com/Products...ProductId=8727

Dean · 07-06-2005, 04:04 PM

I have a very dark blue one near Cincinnati if anyone wants one cheap. Aluminum frame non flip up.

06-29-2005, 09:34 AM	#1
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	Need pictures and info about soft tonneau covers I want a soft slant side tonneau cover for my b-day this year so I need to know which one I want. I am very picky about how this must fit so please post some pictures of what you have and what brand it is. I want a cover that covers up the stake pockets completly and goes to the outer edge of the bed rail. __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

06-29-2005, 10:31 AM	#2
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,937	I will try to post some pictures I just installed a lund on my SWB fleet I had filled my stake pockets prior to paint but these go out quite a bit on the sides I will post some soon... Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

06-29-2005, 10:40 AM	#3
s95930 A-Adam A-Adam Join Date: Apr 2003 Location: Sarpy Co. Ne. South of Omaha Posts: 263	I'll take some pictures of the one I have. It works pretty Good. I am out of town should be back tomorrow. __________________ 70 3/4 ton GMC Camper Special

06-30-2005, 10:17 AM	#4
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	Thanks guys __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

07-01-2005, 09:16 AM	#5
s95930 A-Adam A-Adam Join Date: Apr 2003 Location: Sarpy Co. Ne. South of Omaha Posts: 263	Sorry got Busy Yesterday here are the pictures Ignore the dirt and the junk in the back. But, that is what the cover is for hide the junk. The last picture shows the frame. It clamps to the bed. And by pulling the pivot pins and the clips for the supports you can lift the rest of the frame and the cover of pretty easy. I think I paid $350 for it installed. __________________ 70 3/4 ton GMC Camper Special Last edited by s95930; 07-01-2005 at 09:31 AM.

07-06-2005, 03:13 PM	#6
Jason915 Registered User Join Date: Jan 2005 Location: Colorado Springs Posts: 693	that is just what I want besides the flip up feature, thanks __________________ 1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder

07-06-2005, 03:40 PM	#7
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Heres the one I have on my ZR2. It has one crossbow and the frame clamps on instead of using any type of fasteners (screws). Attached Images

07-06-2005, 04:00 PM	#8
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	I just went through all this a couple of months ago. I have one of the tonneau master covers as well. It is not slant side, I decided I liked the standard better for my needs. It looks just like s95930's slant when down. I love it. Here is the link to where i found it, Cheapest I could find on the web, most web and local dealers were 100.00 more because they had to special order them for our trucks. these guys sold it to me out of stock for a very reasonable price, free shipping to boot. http://www.4wheelonline.com/Products...ProductId=8727 __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was Last edited by phlegm; 07-06-2005 at 04:04 PM.

07-06-2005, 04:04 PM	#9
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I have a very dark blue one near Cincinnati if anyone wants one cheap. Aluminum frame non flip up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.