here are the pictures I promised. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ymhjrhd · 06-30-2005, 01:08 AM

I am hoping I figured this pic thing out. Here goes something.

ymhjrhd · 06-30-2005, 01:12 AM

I am clueless on how to post pictures. If anyone can explain this to me I would appreciate it.

ymhjrhd · 06-30-2005, 01:31 AM

I just checked the FAQ and found how to do it. I will try it again.

ymhjrhd · 06-30-2005, 02:00 AM

here we go. About time!!!!!!!

stllookn · 06-30-2005, 02:14 AM

It looks pretty straight! How is the rust in the rockers and cab corners? It does not look like there are any dents at all. What are your plans for it? Great start and good job posting.

69 Short Fleet · 06-30-2005, 02:17 AM

nice truck, looks like a great start, the wheels look good black. doug

Americanrider · 06-30-2005, 02:18 AM

Nice ride, welcome from the wet side of the state!

ymhjrhd · 07-01-2005, 12:49 AM

I picked this truck up for 700 bucks. I have a 383 I am planning on dropping in this winter. I also would like to change to a newer rear end, the one in their now is in pretty sorry shape. The truck is in fairly good condition. There is rust in both inner rocker panels, and passenger cab corner has pretty much had it. I am debating whether or not I want to completely restore it with some performance upgragdes or go mostly custom. I am leaning towards doing a bit of both. Other than that, just the usual upgrades. I will most likely lower her a few inches and add some different wheels. They will be black though. Thanks Doug! Thats all on the truck plans for now. (Besides some fresh paint)

longhorn71 · 07-01-2005, 03:13 AM

very nice truck to start with!!Wish mine was as rust free as that one.Oh and

**Canadian694x4** · 07-01-2005, 06:30 PM

Welcome To The Board! Nice Truck Too!

thecatseye66 · 07-01-2005, 06:49 PM

Welcome to the board fellow Spokanite!

Glad you figured out how to post pics!

That's a straight truck you have there...

Are you going to go to the Swap Meet at the fairgrounds next weekend? They start on Friday and if you haven't been to this one you should go. It started as a show and swap meet put together by the Early Ford V-8 Club about 20 years ago but now it is mostly Chevy stuff...bring your camera!

ymhjrhd · 07-04-2005, 04:39 PM

I wasnt aware of the swap meet. I will probably go. It depends on what comes up I guess. Thanks for letting me know.

LUV2XCLR8 · 07-04-2005, 04:51 PM

krue · 07-05-2005, 12:14 AM

Looks like a good start on a great truck.

06-30-2005, 01:08 AM	#1
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	here are the pictures I promised. I am hoping I figured this pic thing out. Here goes something.

06-30-2005, 01:12 AM	#2
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	I need help posting pictures I am clueless on how to post pictures. If anyone can explain this to me I would appreciate it.

06-30-2005, 01:31 AM	#3
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	im an idiot I just checked the FAQ and found how to do it. I will try it again.

06-30-2005, 02:14 AM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	It looks pretty straight! How is the rust in the rockers and cab corners? It does not look like there are any dents at all. What are your plans for it? Great start and good job posting. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

07-01-2005, 12:49 AM	#8
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	plans for her I picked this truck up for 700 bucks. I have a 383 I am planning on dropping in this winter. I also would like to change to a newer rear end, the one in their now is in pretty sorry shape. The truck is in fairly good condition. There is rust in both inner rocker panels, and passenger cab corner has pretty much had it. I am debating whether or not I want to completely restore it with some performance upgragdes or go mostly custom. I am leaning towards doing a bit of both. Other than that, just the usual upgrades. I will most likely lower her a few inches and add some different wheels. They will be black though. Thanks Doug! Thats all on the truck plans for now. (Besides some fresh paint)

06-30-2005, 02:00 AM	#4
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	here we go. About time!!!!!!!

06-30-2005, 02:17 AM	#6
69 Short Fleet Registered User Join Date: Nov 2002 Location: Kelowna B.C. Canada Posts: 1,086	nice truck, looks like a great start, the wheels look good black. doug

06-30-2005, 02:18 AM	#7
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Nice ride, welcome from the wet side of the state!

07-01-2005, 03:13 AM	#9
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	very nice truck to start with!!Wish mine was as rust free as that one.Oh and Last edited by longhorn71; 07-01-2005 at 03:14 AM.

07-01-2005, 06:30 PM	#10
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,308	Welcome To The Board! Nice Truck Too! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

07-01-2005, 06:49 PM	#11
thecatseye66 '68 C-20 396 CST CC Join Date: Mar 2005 Location: Spokane, WA Posts: 454	Welcome to the board fellow Spokanite! Glad you figured out how to post pics! That's a straight truck you have there... Are you going to go to the Swap Meet at the fairgrounds next weekend? They start on Friday and if you haven't been to this one you should go. It started as a show and swap meet put together by the Early Ford V-8 Club about 20 years ago but now it is mostly Chevy stuff...bring your camera! __________________ 68 C-20 396/TH400 CST Custom Camper NOW W/DISC BRAKES 01 Jetta Turbo Daily Driver 84 Yamaha Virago 700 - Alaska to Florida Via Maine & Mexico

07-04-2005, 04:39 PM	#12
ymhjrhd Registered User Join Date: Jun 2005 Location: Spokane Wa Posts: 20	ok I wasnt aware of the swap meet. I will probably go. It depends on what comes up I guess. Thanks for letting me know.

07-04-2005, 04:51 PM	#13
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-05-2005, 12:14 AM	#14
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Looks like a good start on a great truck. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.