![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2003
Location: Bremerton, WA.
Posts: 104
|
315/60R15 fitting on 67 -search down
I guess I din't realise the search is gone, and a google search for this site didn't help me, so here goes.
Currently running 275/60 on the rear and bagged, so the 15x10 w/4" bs didn't fit so I went with a 15x8 w/4" bs and that worked (barely, close to the outside fenderwell). Now I would like to go to a 315/60/15 or 30/31x13.5's and curious if anyone has ran this size w/o narrowing the rearend or having them stick out the fenderwell, if so what rim size and b.s did you have? I already have another set of wheel tubs to extend mine and there is room to the frame, so that is no problem, the rearend is a 4.11 posi that has been gone thru so I would like to get away w/o changing it. Maybe a 15x10 with 6" bs? Last edited by pbmcauliffe; 07-08-2005 at 03:02 PM. |
![]() |
![]() |
![]() |
#2 |
Epoxy Primer Friendly
Join Date: Feb 2004
Location: South of Houston TEXXXAS
Posts: 680
|
fit
when BAGGED I know a 15x10 with 5" backspace wont work with a 295/50
![]() |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,977
|
If your 15x8 w/4" bs worked, then I would say yes on the 15x10 w/6" bs in conjunction w/a mini-tub job.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
![]() |
![]() |
![]() |
Bookmarks |
|
|