Steering Collum Shift Linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Striker169 · 07-10-2005, 02:28 PM

Can somone post a pic of the steering collum linkage for an auto I cant seem to get the shifting linkage to stay in the holder it just falls out and I dont know why.

Striker169 · 07-10-2005, 08:15 PM

Nobody has a pic of this?

krue · 07-10-2005, 08:42 PM

This what you need? Very popular pic lately.

LUV2XCLR8 · 07-10-2005, 08:49 PM

Hey KRUE, is that a loose ground wire in pic #2

krue · 07-10-2005, 08:52 PM

Probably, I took those pics in the middle of a cab swap, there were lots of loose wires.

Squid4life · 07-10-2005, 11:22 PM

I personally like the copper wire, uh, I mean cotter key.

Thanks again for the pics!!!!!!!

Striker169 · 07-11-2005, 12:14 AM

Ok in the last pic what holds that rod in the part that is on the collum? Mine if I shift a little too much into park it just falls out. I know my steering collum isn't mounted right but still I dont think it should slide around like that.

JimKshortstep4x4 · 07-11-2005, 07:11 AM

Striker169,

I suspect that you may be missing the metal sleeve out of the stud assembly.

I am attaching an exploded view of the swivel stud assembly. The components that make up the swivel stud assembly starting from the left are: stud and cup washer, sleeve, grommet, flat washer, lock washer, and nut.

Hopefully you can see the parts as the picture quality is not the best.

Jim

Striker169 · 07-11-2005, 10:31 AM

Quote:

Originally Posted by JimKshortstep4x4

Striker169,

I suspect that you may be missing the metal sleeve out of the stud assembly.

I am attaching an exploded view of the swivel stud assembly. The components that make up the swivel stud assembly starting from the left are: stud and cup washer, sleeve, grommet, flat washer, lock washer, and nut.

Hopefully you can see the parts as the picture quality is not the best.

Jim

WOW thanks! Ill check it out this evening after work

07-10-2005, 02:28 PM	#1
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Steering Collum Shift Linkage Can somone post a pic of the steering collum linkage for an auto I cant seem to get the shifting linkage to stay in the holder it just falls out and I dont know why.

07-10-2005, 08:42 PM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	This what you need? Very popular pic lately. Attached Images __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-10-2005, 08:49 PM	#4
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Hey KRUE, is that a loose ground wire in pic #2 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-10-2005, 08:52 PM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Probably, I took those pics in the middle of a cab swap, there were lots of loose wires. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-10-2005, 11:22 PM	#6
Squid4life Registered User Join Date: Mar 2005 Location: Wichita, Kansas Posts: 122	I personally like the copper wire, uh, I mean cotter key. Thanks again for the pics!!!!!!! __________________ '69 C10 LWB- 305, Holley 2 barrel, 700R4, 4/5 drop, dark blue primer!, cheap driver project... Back on the road... In time to sell on Ebay.

07-10-2005, 08:15 PM	#2
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Nobody has a pic of this?

07-11-2005, 12:14 AM	#7
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Ok in the last pic what holds that rod in the part that is on the collum? Mine if I shift a little too much into park it just falls out. I know my steering collum isn't mounted right but still I dont think it should slide around like that.

07-11-2005, 07:11 AM	#8
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Striker169, I suspect that you may be missing the metal sleeve out of the stud assembly. I am attaching an exploded view of the swivel stud assembly. The components that make up the swivel stud assembly starting from the left are: stud and cup washer, sleeve, grommet, flat washer, lock washer, and nut. Hopefully you can see the parts as the picture quality is not the best. Jim Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.