The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-27-2005, 01:36 PM   #1
'70_402
Senior Member
 
'70_402's Avatar
 
Join Date: Dec 2003
Location: Pampa, Texas
Posts: 1,554
Internally regulated alternator..

What is a good year and model to get a internally regulated alternator off of? mid 80's chevy truck? just curious.

also can i just switch over to the internally regulated alt and just change the way it is wired up?

Thanks

Rick

Last edited by '70_402; 07-27-2005 at 01:50 PM.
'70_402 is offline   Reply With Quote
Old 07-27-2005, 04:12 PM   #2
Mad Dog
Registered User
 
Mad Dog's Avatar
 
Join Date: Jun 2005
Location: Independence MO
Posts: 87
1986 chevy celebrity= 100 amp alt....but you gotta change the pulley.
1978,79 chevy truck with a 454....big alternator that pushes 140 amps....just make sure it fits
__________________
72 C10 longbed 5/7 drop, Telstars, 350/th400(for now)
69 Chevelle SS396 (427/th400)
88 K5 on 35's (355/700R4/208)
Mad Dog is offline   Reply With Quote
Old 07-27-2005, 04:24 PM   #3
jescates
Registered User
 
jescates's Avatar
 
Join Date: Aug 2001
Location: Mcloud, Oklahoma
Posts: 656
I am not sure what year mine is, I just went in and told the counter guy that I was swapping over to an internal regulated alternator and he hooked me up. Showed me the different plug that I needed. Pretty easy installation, I know there is a way to jumper the original regulator and use the existing truck wires, but since I mounted the alternator on the passenger side, I bypassed the original regulator all together. I want to say I ran a hot wire straight from the battery to the Alt. and then since I had a dummy light instead of an amp guage, I just looked up the wires in the diagrahm for the dummy light and wired it up so if something went wrong, I would get the light. I used to have a website that showed the step by step process on an early Chevelle, it's the same for our trucks. I will see if I can find it again. Good luck.
__________________
1970 C-10 LWB
1998 Jeep Wrangled TJ
2009 Honda VTX 1300
2013 Buick Enclave
jescates is offline   Reply With Quote
Old 07-27-2005, 04:29 PM   #4
jescates
Registered User
 
jescates's Avatar
 
Join Date: Aug 2001
Location: Mcloud, Oklahoma
Posts: 656
Here, check this site out. The second wiring diagram is pretty much how I set mine up and it works great!
http://www.novaresource.org/alternator.htm
__________________
1970 C-10 LWB
1998 Jeep Wrangled TJ
2009 Honda VTX 1300
2013 Buick Enclave

Last edited by jescates; 07-27-2005 at 04:30 PM.
jescates is offline   Reply With Quote
Old 07-28-2005, 06:11 AM   #5
phanatic32212
It's Done When It Runs!!
 
phanatic32212's Avatar
 
Join Date: Sep 2002
Location: Jacksonville, FL (Orange Park)
Posts: 220
I ordered this p/n from summit. SUM-811001 100 amps and bolts in original location. There is also a great write-up in the FAQ section about the wiring from external to internal reg. alternators. It took me 15 minutes max to do the whole thing.
__________________
Or Give Me DEATH
phanatic32212 is offline   Reply With Quote
Old 07-28-2005, 06:15 AM   #6
phanatic32212
It's Done When It Runs!!
 
phanatic32212's Avatar
 
Join Date: Sep 2002
Location: Jacksonville, FL (Orange Park)
Posts: 220
Here's a link to the FAQ:
http://67-72chevytrucks.com/vboard/s...9&page=1&pp=25
__________________
Or Give Me DEATH
phanatic32212 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com