Lap to Shoulder belt conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JalopyToGo · 08-25-2005, 12:46 PM

Noticed holes in the cab corners for sholder belts. Wondering if anyone has installed any and which ones to use. I have almost finished the minor refurb on the 69 for my son, starts driving next week. I think the shoulder belts would be safer. Any ideas?
Thanks

chickenwing · 08-25-2005, 01:14 PM

I used 2nd row suburban. Mid-late 80's. Female portion too short. Very akward to buckle. Looking for longer ones. Little sensitive on the locks too. Many members have went with S-10 or baby blazer belts with sucess. They complain about the sholder harness being too short for larger bellies. I don't have a big belly, I was just trying to be differant.

Oh, removing the fuel tank is mandatory for the driver side belt unless you fab up a bracket to extend the mount forward.

mocwon · 08-25-2005, 01:31 PM

I bought these many months ago. Had to use a piece of angle iron on each one to position the brackets the correct way so they would work. The truck's not on the road yet but these work good just sitting still in the truck. Bucket seats, by the way.

http://cgi.ebay.com/ebaymotors/3-POI...tegoryZ33725QQ

Lobo'74 · 08-25-2005, 02:19 PM

I installed these. http://www.julianos.com/how2_67chevy_truck.html

Very nice, very safe, very, very easy. The plates they use under the floor are a great item. I'm going to get more to use for my seat attach points.

al's71gmc · 08-26-2005, 03:24 AM

**************** sells these for our trucks. i think he's a vendor on this board. he sell's on ebay for $160 a set. i plan on getting some for mine and my son's, but haven't yet, so can't vouch for how well they work.
al
I don't know why it didn't print the name? It's Rick's Pickup Parts with no caps or spaces.

JalopyToGo · 08-26-2005, 06:16 AM

Thanks for the responses, I knew you guys would have an answer. I'll check these links out today and try to get some ordered.

**special-K** · 08-26-2005, 08:31 AM

How do I contact **************?

old gearhead · 08-27-2005, 02:29 AM

Just go to WWW.********* and use the link to ********* it's right next to the link to &&&&&&&&&&&&

al's71gmc · 08-27-2005, 07:49 AM

I tried to post it again, but for some reason it keeps doing the **** thing. The link is ricks pickup parts with no spaces and a dotcom after it.
Al

Bill72BB · 08-27-2005, 10:49 AM

S10 , belts in BB , I had to get a Free seat belt extender for my large friends ( over 260 ) ,I am 200 and plenty of room .
You have to make a bracket to clear the tank if you still have it in the cab ,
I would look into some of the belts that are direct bolt in ,if cost isn't a problem .

nitor · 08-27-2005, 08:33 PM

Quote:

Originally Posted by chickenwing

I used 2nd row suburban. Mid-late 80's. Female portion too short. Very akward to buckle. Looking for longer ones. Little sensitive on the locks too.

I put a set out of a 73-87 in mine. I'm not sure of the year of the truck I took them out of. The female portion is too short, but they work just fine, and look like they were made for it.

alf1096 · 08-28-2005, 10:58 AM

ne:

Quote:

Originally Posted by old gearhead

Just go to WWW.********* and use the link to ********* it's right next to the link to &&&&&&&&&&&&

08-25-2005, 12:46 PM	#1
JalopyToGo Registered User Join Date: Dec 2003 Location: Parker, Tx Posts: 61	Lap to Shoulder belt conversion Noticed holes in the cab corners for sholder belts. Wondering if anyone has installed any and which ones to use. I have almost finished the minor refurb on the 69 for my son, starts driving next week. I think the shoulder belts would be safer. Any ideas? Thanks __________________ 69 LWB 70 SWB 01 Superduty Diesel 4X4 4door 06 Caddy CTS

08-25-2005, 01:31 PM	#3
mocwon Keep On Truckin' Join Date: Mar 2003 Location: Buda, Texas Posts: 1,354	I bought these many months ago. Had to use a piece of angle iron on each one to position the brackets the correct way so they would work. The truck's not on the road yet but these work good just sitting still in the truck. Bucket seats, by the way. http://cgi.ebay.com/ebaymotors/3-POI...tegoryZ33725QQ __________________ Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... Last edited by mocwon; 08-25-2005 at 01:45 PM.

08-25-2005, 02:19 PM	#4
Lobo'74 Registered User Join Date: Nov 2002 Location: Charlottesville, VA Posts: 404	I installed these. http://www.julianos.com/how2_67chevy_truck.html Very nice, very safe, very, very easy. The plates they use under the floor are a great item. I'm going to get more to use for my seat attach points. __________________ "Truck" '67 small window '79 350 .030 over, LT1 "clone"

08-26-2005, 03:24 AM	#5
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	**************** sells these for our trucks. i think he's a vendor on this board. he sell's on ebay for $160 a set. i plan on getting some for mine and my son's, but haven't yet, so can't vouch for how well they work. al I don't know why it didn't print the name? It's Rick's Pickup Parts with no caps or spaces. __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! Last edited by al's71gmc; 08-26-2005 at 03:26 AM. Reason: ??

08-26-2005, 06:16 AM	#6
JalopyToGo Registered User Join Date: Dec 2003 Location: Parker, Tx Posts: 61	Thanks for the responses, I knew you guys would have an answer. I'll check these links out today and try to get some ordered. __________________ 69 LWB 70 SWB 01 Superduty Diesel 4X4 4door 06 Caddy CTS

08-25-2005, 01:14 PM	#2
chickenwing Lovin' Life in Miss.! Join Date: Mar 2004 Location: Puckett, Mississippi Posts: 1,937	I used 2nd row suburban. Mid-late 80's. Female portion too short. Very akward to buckle. Looking for longer ones. Little sensitive on the locks too. Many members have went with S-10 or baby blazer belts with sucess. They complain about the sholder harness being too short for larger bellies. I don't have a big belly, I was just trying to be differant. Oh, removing the fuel tank is mandatory for the driver side belt unless you fab up a bracket to extend the mount forward.

08-26-2005, 08:31 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	How do I contact *************? __________________ "BUILDING A BETTER WAY TO SERVE* THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-27-2005, 02:29 AM	#8
old gearhead Registered User Join Date: Sep 2002 Location: Guthrie, OK Posts: 21	Just go to WWW.******* and use the link to ******* it's right next to the link to &&&&&&&&&&&& __________________ 1969 1/2 ton CST the never-ending project!! 350 muncie m21 4 spd 3.73 posi and a box of extra bolts

08-27-2005, 07:49 AM	#9
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	I tried to post it again, but for some reason it keeps doing the **** thing. The link is ricks pickup parts with no spaces and a dotcom after it. Al __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

08-27-2005, 10:49 AM	#10
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	S10 , belts in BB , I had to get a Free seat belt extender for my large friends ( over 260 ) ,I am 200 and plenty of room . You have to make a bracket to clear the tank if you still have it in the cab , I would look into some of the belts that are direct bolt in ,if cost isn't a problem . Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.