New Sport Truck Magazine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevyboy55 · 09-16-2005, 09:39 PM

Got the new sport truck mag. today & saw a real nice article about Tim Christians 67 GMC. WOW what a nice truck! Quite the story behind it also.
Tim if you read this post, NICE JOB! Mike

70c10 · 09-16-2005, 11:58 PM

Congrats Tim!

**Yukon Jack** · 09-17-2005, 09:19 AM

Will have to check it out. It is a beautiful truck for sure.

**Tim Christian** · 09-18-2005, 10:19 PM

Thanks Guys!!!!! You can also go to www.sporttruck.com and see the article. Thanks Again,

stllookn · 09-18-2005, 10:34 PM

Tim...Sweeeet ride and great story. I did not hear that! All I ever got for all my lawn mowing was a distaste for the task...LOL!

**N2TRUX** · 09-18-2005, 10:38 PM

Very nice article Tim! It's well deserved too. You have done a very tasteful job on building your truck and you finally get the reward you deserve. Not only is it in the article, but it has a nice pic in the front of the mag too.

Good job Tim!!!!

*72CSTC5* · 09-18-2005, 11:07 PM

Tim, that thing is just absolutely gorgeous. Very nice job on that truck of yours. Congrats on the magazine spread.

djracer · 09-18-2005, 11:15 PM

Congrats Tim U Da Man!

llegos · 09-19-2005, 01:26 AM

wow, sick. i hope one day my truck will be that nice

krue · 09-19-2005, 02:09 AM

Congrats tim, a stepside and GMC, what a beauty!

**Yukon Jack** · 09-19-2005, 02:51 PM

Great story behind the truck!

**Tim Christian** · 09-19-2005, 10:51 PM

Could someone take the picture N2TRUX posted and resize it so I could use it for a avatar?

**N2TRUX** · 09-19-2005, 10:56 PM

Be glad to. What is the max your avatar can be? This is 105 x 51...

weasel29gm · 09-19-2005, 10:58 PM

Saw Tim at the Auto Fair and he must have showed me the mag at least 10 times!!!!!! LOL!!!!! Great story for a great guy!!!!!!!! CONGRATS BUDDY!!!

smbrouss70 · 09-19-2005, 10:59 PM

Here ya Go! Nice job Tim

djracer · 09-19-2005, 11:01 PM

Tim Can't you have a larger avatar because you are a vendor?

smbrouss70 · 09-19-2005, 11:04 PM

Damn, I got beat. N2TRUX, I looked it up, max size is 100x100. But mine is 100x53

Stroker · 09-19-2005, 11:08 PM

Tim, you nailed it!!! The perfect blend of old and new. I can't say I've seen any more tastfully done.

**N2TRUX** · 09-19-2005, 11:10 PM

Quote:

Originally Posted by djracer

Tim Can't you have a larger avatar because you are a vendor?

Yes, I'm pretty sure he can. Look at the info on your avatar page and it will tell you the max size....

**Tim Christian** · 09-19-2005, 11:14 PM

Thanks again guys for the comments and my new avatar. We have now started on my 15 year old son's truck and I am already getting carried away! This is a SICKNESS

I have!!!!!!!

red71cheyenne · 09-19-2005, 11:17 PM

Tim, congratulations, it couldn't have happened to a more deserving board member and vendor. The truck is immaculate! Jeff.

BowTieMan · 09-20-2005, 11:50 PM

That is a sweet truck. How are your speakers mounted? I noticed it said 6x9 stealth mounts.

bigcdawg99 · 09-21-2005, 02:41 AM

Awesome truck! Guys with GMC's love to see one get in a magazine. Its so nice it doesn't even need a hot chic in a bikini in front of it! (good thing they have some trucks in there that need that)

Jimbotronics · 09-21-2005, 05:49 AM

Bad A$$ Tim!! awesome job!

09-16-2005, 09:39 PM	#1
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	New Sport Truck Magazine Got the new sport truck mag. today & saw a real nice article about Tim Christians 67 GMC. WOW what a nice truck! Quite the story behind it also. Tim if you read this post, NICE JOB! Mike

09-16-2005, 11:58 PM	#2
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Congrats Tim! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

09-17-2005, 09:19 AM	#3
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Will have to check it out. It is a beautiful truck for sure. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-18-2005, 10:34 PM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Tim...Sweeeet ride and great story. I did not hear that! All I ever got for all my lawn mowing was a distaste for the task...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

09-18-2005, 10:38 PM	#6
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Very nice article Tim! It's well deserved too. You have done a very tasteful job on building your truck and you finally get the reward you deserve. Not only is it in the article, but it has a nice pic in the front of the mag too. Good job Tim!!!! __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-18-2005, 10:19 PM	#4
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Thanks Guys!!!!! You can also go to www.sporttruck.com and see the article. Thanks Again,

09-18-2005, 11:07 PM	#7
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Tim, that thing is just absolutely gorgeous. Very nice job on that truck of yours. Congrats on the magazine spread.

09-18-2005, 11:15 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Congrats Tim U Da Man! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-19-2005, 01:26 AM	#9
llegos Registered User Join Date: Aug 2005 Location: pleasanton, CA Posts: 570	wow, sick. i hope one day my truck will be that nice __________________ -Steve

09-19-2005, 02:09 AM	#10
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Congrats tim, a stepside and GMC, what a beauty! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

09-19-2005, 02:51 PM	#11
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Great story behind the truck! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

09-19-2005, 10:51 PM	#12
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Could someone take the picture N2TRUX posted and resize it so I could use it for a avatar?

09-19-2005, 10:56 PM	#13
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Be glad to. What is the max your avatar can be? This is 105 x 51... Attached Images Last edited by N2TRUX; 09-19-2005 at 10:57 PM.

09-19-2005, 10:58 PM	#14
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Saw Tim at the Auto Fair and he must have showed me the mag at least 10 times!!!!!! LOL!!!!! Great story for a great guy!!!!!!!! CONGRATS BUDDY!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

09-19-2005, 10:59 PM	#15
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Here ya Go! Nice job Tim Attached Images __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build



Register or Log In To remove these advertisements.

09-19-2005, 11:01 PM	#16
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Tim Can't you have a larger avatar because you are a vendor? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-19-2005, 11:04 PM	#17
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,781	Damn, I got beat. N2TRUX, I looked it up, max size is 100x100. But mine is 100x53 __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

09-19-2005, 11:08 PM	#18
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	Tim, you nailed it!!! The perfect blend of old and new. I can't say I've seen any more tastfully done. __________________ 72 SWB parts and pieces Oklahoma

09-19-2005, 11:14 PM	#20
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Thanks again guys for the comments and my new avatar. We have now started on my 15 year old son's truck and I am already getting carried away! This is a SICKNESS I have!!!!!!!

09-19-2005, 11:17 PM	#21
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Tim, congratulations, it couldn't have happened to a more deserving board member and vendor. The truck is immaculate! Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

09-20-2005, 11:50 PM	#22
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	That is a sweet truck. How are your speakers mounted? I noticed it said 6x9 stealth mounts. __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

09-21-2005, 02:41 AM	#23
bigcdawg99 Registered User Join Date: Jan 2005 Location: Mesa, AZ Posts: 67	Awesome truck! Guys with GMC's love to see one get in a magazine. Its so nice it doesn't even need a hot chic in a bikini in front of it! (good thing they have some trucks in there that need that) __________________ 71 GMC Shortbed Fleetside (under construction) "I like guns. You got a gun, you don't have to work out." Chris Rock

09-21-2005, 05:49 AM	#24
Jimbotronics YA YA Join Date: Aug 2004 Location: Rockledge, Fl Posts: 1,273	Bad A$$ Tim!! awesome job! __________________ Jimbo '72 SWB - 350 (frame-off resto in progress - donations accepted) '04 Chevy Avalanche '03 Cadillac CTS (wife's ride) Restoration progress - http://67-72chevytrucks.com/vboard/s...d.php?t=335707

Register or Log In To remove these advertisements.