Video from yesterday on the way to work - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Yukon Jack** · 10-14-2005, 10:34 AM

Was on the way to work yesterday morning and couldn't resist getting some video of the truck accelerating. I used the camera strap to hold the camera, so don't worry, was being safe.

Now don't go laughing at the crappy steering wheel - I've got different one that will be installed at some point. And as for having both the 4 on the floor and the 3 on the tree shifter, well, haven't gotten around to yanking the old column in favor of the tilt that I have ready.

The first clip is larger but ya get to watch the tach. Gets a bit bouncy once I get into 4th gear.

Video file about 6 megs

Audio only MP3 file, much smaller

I now know I have a problem - I have found my self control is a bit lacking as I just can't keep my right foot off the go pedal

**tnblazerk5** · 10-14-2005, 11:12 AM

boy it sounds good

Putter · 10-14-2005, 11:34 AM

Those mudders start singing once you get up to speed, huh???

**Canadian694x4** · 10-14-2005, 12:47 PM

Wicked Man!!! Gotta Get Me A Big Block!!!

**1970 CST Short Wide** · 10-14-2005, 12:59 PM

I see you fixed the motor problem, now you have to work on that right foot
Isnâ€™t the torque of that BIG BLOCK a kick in the a$$.
How about some new picâ€™s, would like to see your progress

**Yukon Jack** · 10-14-2005, 02:53 PM

me have pics?

Just what I need, an excuse to post more pictures

**Yukon Jack** · 10-14-2005, 02:54 PM

And yes, the torque is something else - pretty addictive.

**1970 CST Short Wide** · 10-14-2005, 03:23 PM

Looking Good

67chevemall · 10-14-2005, 04:00 PM

very cool!

LUV2XCLR8 · 10-14-2005, 04:20 PM

Ole Blue 68 · 10-14-2005, 04:51 PM

I love that sound!

And looking at those new pics, I like your door panels. Did you do those yourself?

**Yukon Jack** · 10-14-2005, 05:14 PM

Yep, I used the old panels as templates and made the new panels from bathroom grade backing board. I then glued foam to the panels followed by the fabric that matches the seats.

Alexis · 10-14-2005, 05:20 PM

How about a clip from in front of the motor while reving it?

Sounds good. God I miss my 3/4ton.

1968GMC · 10-14-2005, 06:54 PM

that is funny as hell im glad your done with i. way to go bro. sounds real good. l had a smile on my face watching it, l wach it twice, way cool

llegos · 10-14-2005, 08:10 PM

haha, look at that steering wheel, and whats with the colum shifter???lol j/k

thats pretty cool, nice truck

llegos · 10-14-2005, 08:10 PM

gotta get that speedo working too....

**Yukon Jack** · 10-14-2005, 08:16 PM

The column shifter is to confuse the competition lol. As for the speedo, I keep thinking about whether to try to sell the mechanical and go with an electric - sure would make calibrating it easy if I go electric.

**BOSS** · 10-14-2005, 08:42 PM

Awesome!!!!!!!!!!

dion · 10-15-2005, 01:14 AM

Cool!

nitor · 10-16-2005, 05:41 AM

Quote:

Originally Posted by Yukon Jack

The column shifter is to confuse the competition lol. As for the speedo, I keep thinking about whether to try to sell the mechanical and go with an electric - sure would make calibrating it easy if I go electric.

What kind of gauges are those? I'm looking to replace my stock with something with numbers. I'm kinda liking Autometer Phamtom.

**Yukon Jack** · 10-16-2005, 10:43 AM

Those are the Phantom series.

BraveDave · 10-16-2005, 07:30 PM

what a crappy steering wheel.

*FormerMember* · 10-16-2005, 08:27 PM

So, where did you get the fabric that matches the seats?

I have a similiar pair sitting in my garage...

Striker169 · 10-17-2005, 12:05 AM

what seat is that?

MandarinSixSeven · 10-17-2005, 12:49 AM

Sounds like a freakin' Bansee man! That's awesome...how do you get to sound like that when you are going 0mph?

hehe.

I love videos.

10-14-2005, 10:34 AM	#1
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Video from yesterday on the way to work Was on the way to work yesterday morning and couldn't resist getting some video of the truck accelerating. I used the camera strap to hold the camera, so don't worry, was being safe. Now don't go laughing at the crappy steering wheel - I've got different one that will be installed at some point. And as for having both the 4 on the floor and the 3 on the tree shifter, well, haven't gotten around to yanking the old column in favor of the tilt that I have ready. The first clip is larger but ya get to watch the tach. Gets a bit bouncy once I get into 4th gear. Video file about 6 megs Audio only MP3 file, much smaller I now know I have a problem - I have found my self control is a bit lacking as I just can't keep my right foot off the go pedal __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 12:24 PM.

10-14-2005, 11:34 AM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Those mudders start singing once you get up to speed, huh??? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

10-14-2005, 12:47 PM	#4
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,308	Wicked Man!!! Gotta Get Me A Big Block!!! __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

10-14-2005, 12:59 PM	#5
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,168	I see you fixed the motor problem, now you have to work on that right foot Isnâ€™t the torque of that BIG BLOCK a kick in the a$$. How about some new picâ€™s, would like to see your progress __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

10-14-2005, 02:53 PM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	me have pics? Just what I need, an excuse to post more pictures __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 06-24-2010 at 12:24 PM.

10-14-2005, 11:12 AM	#2
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	boy it sounds good

10-14-2005, 02:54 PM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	And yes, the torque is something else - pretty addictive. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-14-2005, 03:23 PM	#8
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,168	Looking Good __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

10-14-2005, 04:00 PM	#9
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	very cool! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

10-14-2005, 04:20 PM	#10
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	__________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-14-2005, 04:51 PM	#11
Ole Blue 68 Registered User Join Date: Aug 2005 Location: Philly Posts: 1,140	I love that sound! And looking at those new pics, I like your door panels. Did you do those yourself?

10-14-2005, 05:14 PM	#12
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Yep, I used the old panels as templates and made the new panels from bathroom grade backing board. I then glued foam to the panels followed by the fabric that matches the seats. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-14-2005, 05:20 PM	#13
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	How about a clip from in front of the motor while reving it? Sounds good. God I miss my 3/4ton.

10-14-2005, 06:54 PM	#14
1968GMC love my truck Join Date: May 2001 Location: aylmer QC Posts: 648	that is funny as hell im glad your done with i. way to go bro. sounds real good. l had a smile on my face watching it, l wach it twice, way cool

10-14-2005, 08:10 PM	#15
llegos Registered User Join Date: Aug 2005 Location: pleasanton, CA Posts: 570	haha, look at that steering wheel, and whats with the colum shifter???lol j/k thats pretty cool, nice truck __________________ -Steve



Register or Log In To remove these advertisements.

10-14-2005, 08:10 PM	#16
llegos Registered User Join Date: Aug 2005 Location: pleasanton, CA Posts: 570	gotta get that speedo working too.... __________________ -Steve

10-14-2005, 08:16 PM	#17
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	The column shifter is to confuse the competition lol. As for the speedo, I keep thinking about whether to try to sell the mechanical and go with an electric - sure would make calibrating it easy if I go electric. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-14-2005, 08:42 PM	#18
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Awesome!!!!!!!!!! __________________ Support our site Norwood Survivor

10-15-2005, 01:14 AM	#19
dion 72 Cheyenne Join Date: Oct 2001 Location: San Diego Posts: 2,086	Cool! __________________ Burnout Idle 1972Cheyenne 1966/67Stouts

10-16-2005, 10:43 AM	#21
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Video from yesterday on the way to work Those are the Phantom series. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-16-2005, 07:30 PM	#22
BraveDave Registered User Join Date: Dec 2002 Location: Magnolia, Texas Posts: 336	Re: Video from yesterday on the way to work what a crappy steering wheel. __________________ '72 Chevy Cheyenne Super, '56 Chevy Bel Air,'56 Chevy Nomad, '61 Chevy Impala, '64 Cadillac Fleetwood, 1966 Thunderbird Convertible

10-16-2005, 08:27 PM	#23
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Video from yesterday on the way to work So, where did you get the fabric that matches the seats? I have a similiar pair sitting in my garage...

10-17-2005, 12:05 AM	#24
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Video from yesterday on the way to work what seat is that?

10-17-2005, 12:49 AM	#25
MandarinSixSeven Seasonal Poster Join Date: Apr 2002 Location: Kelowna BC Canada Posts: 896	Re: Video from yesterday on the way to work Sounds like a freakin' Bansee man! That's awesome...how do you get to sound like that when you are going 0mph? hehe. I love videos. __________________ 67 GMC Short Step 350/4-Speed/3.08 Posi Front/Rear Sway Bars Kelowna BC, Canada Member of DTPW

Register or Log In To remove these advertisements.