gear selector - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 10-22-2005, 01:24 PM

My gear shift is one gear off from my tranny(left of park=park park=nuetral n=drive and so on.)

Is there an easy way to adjust this or should I just live with it?

Sweet72 · 10-22-2005, 03:11 PM

The '72 has an adjustment in the auto trans linkage rod on the steering column. Open the hood and look for the adjustment on the upper end of the rod.

**pjmoreland** · 10-22-2005, 04:36 PM

You'll know you have it adjusted correctly if you can shift between N and D without pulling back on the shifter lever.

76bonanza · 10-22-2005, 05:00 PM

Done works like a charm now thank you to sweet72 and pjmoreland

Sweet72 · 10-22-2005, 06:04 PM

Your welcome, glad you got her straight.

10-22-2005, 01:24 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	gear selector My gear shift is one gear off from my tranny(left of park=park park=nuetral n=drive and so on.) Is there an easy way to adjust this or should I just live with it? __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

10-22-2005, 03:11 PM	#2
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: gear selector The '72 has an adjustment in the auto trans linkage rod on the steering column. Open the hood and look for the adjustment on the upper end of the rod. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

10-22-2005, 04:36 PM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,784	Re: gear selector You'll know you have it adjusted correctly if you can shift between N and D without pulling back on the shifter lever.

10-22-2005, 05:00 PM	#4
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: gear selector Done works like a charm now thank you to sweet72 and pjmoreland __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

10-22-2005, 06:04 PM	#5
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: gear selector Your welcome, glad you got her straight. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.