Ok, it's time to buy parts

[jlaird]

I've saved my suspension build for this winter, so it's time to buy some parts. I'm going with SD bridge kit with bag over axle and his 4 link. My first question is should I get the 8" or 10" notch? Im going to run 20's that will probably be around 29" tall with tires.

The second question is what should I measure to get the length of the 4 link? I talked to somebody at SD (not Jason) and he said take a measurement from the center of the axle to the front trailing arm mounts. Doesn't sound right to me??

thanks,
josh

[67Fleet]

8" step notch should be fine. 29" tall tire on a 20" rim would be around a 275/45/20 tire. Still quite a bit of sidewall in that width. I had those on my '03.
For the link bars, I'm a little confused on why he'd want you to measure that as well? I can't imagine the link bars going up that far, that would be pointless. I'd think there would be a mounting plate to be either bolted or welded to the frame to mount the link bars. What kind of 4-link are you looking at doing?

[jlaird]

SD's parallel four link here:

http://www.*****************/Parallel_4-Link_Kit.php