72 2wd Blaser spindles will the y work on? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigblockc10 · 11-03-2005, 10:49 PM

Hey I sure hope I didn't jump the gun again here, but these 2 inch drop spindles I found on Ebay were going cheap 142.00 new so I bought em.

I didn't have time to check the interchage as i was at work when I bid and won so can you guy's give me some insight.

they are for a 72 2wd Blaser will they fit on a 71/72 disc brake suspension out of a C10.

Thanks

jsbgump · 11-03-2005, 11:07 PM

They should work with no problem

**John Fabris** · 11-03-2005, 11:07 PM

If they are correct for a 72 2wd blazer, they will work on 71-72 1/2 ton truck/blazer/suburban.

They should also work on 67 - 70 but you will have to change ball joints and outer tierod ends to 71-72. If I am incorrect, someone please add the correct info...

bigblockc10 · 11-03-2005, 11:19 PM

Thanks Guy's this board is absolutely indespensible.
Now just get lowered springs,finish the prostreet frame(building myself),bodywork,parts,parts,paint and I'll almost be finished!!

Thanks again!!!!

Deuce · 11-04-2005, 12:58 AM

Quote:

Originally Posted by John Fabris

If they are correct for a 72 2wd blazer, they will work on 71-72 1/2 ton truck/blazer/suburban.

They should also work on 67 - 70 but you will have to change ball joints and outer tierod ends to 71-72. If I am incorrect, someone please add the correct info...

You will also need the conversion adjusting sleeve from someone like CCP. The 71/72 tierods are a different diameter than the 67-70.

ChevLoRay · 11-04-2005, 11:26 AM

Quote:

Originally Posted by Deuce

You will also need the conversion adjusting sleeve from someone like CCP. The 71/72 tierods are a different diameter than the 67-70.

My dropped spindles are from Early Classic and they use the stock tie rod ends. But, as stated in the quote, some others will require the conversion pieces, as listed.

Good price, though.

11-03-2005, 10:49 PM	#1
bigblockc10 Registered User Join Date: Feb 2003 Location: Holland Pa. Posts: 76	72 2wd Blaser spindles will the y work on? Hey I sure hope I didn't jump the gun again here, but these 2 inch drop spindles I found on Ebay were going cheap 142.00 new so I bought em. I didn't have time to check the interchage as i was at work when I bid and won so can you guy's give me some insight. they are for a 72 2wd Blaser will they fit on a 71/72 disc brake suspension out of a C10. Thanks __________________ 1970 C10 Stepside (soon to be a 68 w/PS/PB/S&W back-half narrowed F**D 9inch w/Discs) 66 427/435 corvette motor (hopefully 871 Blower) 66 M21 4 speed (swapped in a built TH400) 31/16.5/15 Mickeys (soon to be 29.5X18.5X15 MT) 1972 C10 Stepside Pro-Street 1988 bed 3" Top Chop Custom Red Pearl paint w/overlapping Ghost Flames P/S P/W P/B P/DL P/door open Everything Shaved Frenched antenna 461CI BBC BDS Blower 1100 Dynoed HP TH400 Super Heavy Duty Full Back-Half Narrowed 12 Bolt 4:10

11-03-2005, 11:07 PM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: 72 2wd Blaser spindles will the y work on? They should work with no problem __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

11-03-2005, 11:07 PM	#3
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: 72 2wd Blaser spindles will the y work on? If they are correct for a 72 2wd blazer, they will work on 71-72 1/2 ton truck/blazer/suburban. They should also work on 67 - 70 but you will have to change ball joints and outer tierod ends to 71-72. If I am incorrect, someone please add the correct info... __________________ John Fabris 67 C10 SWB

11-03-2005, 11:19 PM	#4
bigblockc10 Registered User Join Date: Feb 2003 Location: Holland Pa. Posts: 76	Re: 72 2wd Blaser spindles will the y work on? Thanks Guy's this board is absolutely indespensible. Now just get lowered springs,finish the prostreet frame(building myself),bodywork,parts,parts,paint and I'll almost be finished!! Thanks again!!!! __________________ 1970 C10 Stepside (soon to be a 68 w/PS/PB/S&W back-half narrowed F**D 9inch w/Discs) 66 427/435 corvette motor (hopefully 871 Blower) 66 M21 4 speed (swapped in a built TH400) 31/16.5/15 Mickeys (soon to be 29.5X18.5X15 MT) 1972 C10 Stepside Pro-Street 1988 bed 3" Top Chop Custom Red Pearl paint w/overlapping Ghost Flames P/S P/W P/B P/DL P/door open Everything Shaved Frenched antenna 461CI BBC BDS Blower 1100 Dynoed HP TH400 Super Heavy Duty Full Back-Half Narrowed 12 Bolt 4:10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.