![]() |
![]() |
#1 |
Senior Member
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,525
|
Disk brake drag
The other day I had my wheel off, and spun the rotor. I know disks brakes will drag a little all the time, but this is what I considered too much. Anyone have ideas on how to fix this? I'm thinking if I can fix this, I can pickup some mileage and the truck will feel a little quicker.
|
![]() |
![]() |
![]() |
#2 |
~Rest In Peace~
Join Date: May 2005
Location: CALIFORNIA NOR CAL
Posts: 9,707
|
Re: Disk brake drag
change the caliper might be stuck piston
__________________
is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Mar 2004
Location: Somewhere
Posts: 985
|
Re: Disk brake drag
check the sliders on the calapers first. remove them wire wheel grease and reinstall. all it cost is time wheris calipers cost $$$.
ondrew |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Nov 2005
Location: Portland Oregon
Posts: 287
|
Re: Disk brake drag
You might want to check to see if the sliders are slightly bent. This would cause them to stick. I think you can pick new ones for fairly cheap. Good luck with your Brakes.
Bruce |
![]() |
![]() |
![]() |
#5 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,859
|
Re: Disk brake drag
Better mileage and cooler bearings.Not to mention you`ll save the rotors.Try lubing the sliders first.Then go get a caliper if they don`t free up.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#6 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
Re: Disk brake drag
When the wheel is off, you have so little leverage that it seems way too tight.
Jack it up and see if the wheel spins OK. |
![]() |
![]() |
![]() |
#7 |
Back in the sticks
Join Date: Jan 2001
Location: Fordland, MO
Posts: 3,188
|
Re: Disk brake drag
Second all above. You can get a brake kit for them with new bolts and bushings and that will help the calipers slide right. Jeff.
__________________
1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty |
![]() |
![]() |
![]() |
Bookmarks |
|
|