Drag race Rear end..any intrest? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigjimzlll · 11-21-2005, 05:12 PM

Im getting ready to swap to a shortend 9". I am looking to selling my new 12 bolt.
It has welded tubes, Mark Williams new 35 spline axels,spool and C clip eliminators. New drum brakes. 4.56 gears. One of those girdled aluminum covers. 4340 yoke. Long 1/2" studs 6 on 5.5 pattern. All parts have less than 10 passes on them. The rear was setup by a professional.

It will be available the 1st week in December. Im thinking $700.00 is more than fair.
Let me know If anyone wants it. A very small deposit will hold it until you want it.

<upadated>
Newish 4"lowering springs included and shocks
I also have 2 sets of centerline hellcats with one set havin MT et drags 10.5x28 and the other set 13.5x28 mt et streets. both have less than 10 passes. Will make a great deal to the buyer of the rear.

djracer · 11-30-2005, 03:29 PM

bigjim
do you have you 9 inch stuff yet?

bigjimzlll · 12-01-2005, 01:09 AM

this weekend if the weather is any good I will pickit up. 1000 clams is a lot b4 christmas..but priorities you know..lol. It has 4.86 gears ..huge axels and a spool. disc brakes. Its 56" wide. I have some 32"x15x15 Mickey thompson et drags to fit on it. I am going to slam it pretty far so it should be pretty cool.

djracer · 12-01-2005, 01:22 AM

Kool I have some real nice 9inch stuff for sale if you see anyone looking! Mines not that cheap!

11-21-2005, 05:12 PM	#1
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Drag race Rear end..any intrest?<updated> Im getting ready to swap to a shortend 9". I am looking to selling my new 12 bolt. It has welded tubes, Mark Williams new 35 spline axels,spool and C clip eliminators. New drum brakes. 4.56 gears. One of those girdled aluminum covers. 4340 yoke. Long 1/2" studs 6 on 5.5 pattern. All parts have less than 10 passes on them. The rear was setup by a professional. It will be available the 1st week in December. Im thinking $700.00 is more than fair. Let me know If anyone wants it. A very small deposit will hold it until you want it. <upadated> Newish 4"lowering springs included and shocks I also have 2 sets of centerline hellcats with one set havin MT et drags 10.5x28 and the other set 13.5x28 mt et streets. both have less than 10 passes. Will make a great deal to the buyer of the rear. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA Last edited by bigjimzlll; 11-22-2005 at 10:46 AM.*

11-30-2005, 03:29 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Drag race Rear end..any intrest? bigjim do you have you 9 inch stuff yet? __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-01-2005, 01:09 AM	#3
bigjimzlll Senior Member Join Date: Dec 2001 Location: Redding,CA...USA Posts: 4,736	Re: Drag race Rear end..any intrest? this weekend if the weather is any good I will pickit up. 1000 clams is a lot b4 christmas..but priorities you know..lol. It has 4.86 gears ..huge axels and a spool. disc brakes. Its 56" wide. I have some 32"x15x15 Mickey thompson et drags to fit on it. I am going to slam it pretty far so it should be pretty cool. __________________ It's called "drag racing" if they called it "tic..tic..WHAM!..BANG! F*&K!!!", they'd have to keep the magazines under the counter with the other men's publications click the clicky to join the site.... http://67-72chevytrucks.com/vboard/payments.php 67 lwb..first hotrod in 25 years..540 best ET is 9.45 @ 141.44 Anderson,CA

12-01-2005, 01:22 AM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: Drag race Rear end..any intrest? Kool I have some real nice 9inch stuff for sale if you see anyone looking! Mines not that cheap! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.