Auto Steering Columns, Van Tilts, High Hump auto cover - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**STP67-72** · 11-27-2005, 01:49 AM

Regular Steering Columns $75.00 - $100.00
Van Tilts /no truck tilts or 4 speed tilts $150.00
High Hump Cover $50.00
I will take better pictures if requested

RPOZ11 · 11-27-2005, 03:16 AM

Price on a non-tilt auto column shift in : Black????

**72ironmike** · 11-27-2005, 09:19 AM

Put me in line for the orange bed if it is for sale? Thanks.

**STP67-72** · 11-27-2005, 11:24 AM

Everybody is asking about the orange bed and it is not for sale. Yall would laugh at what i would have to have for it anyway. SWB wood floor ,oak kit and ss strips. I have several beds and at this time i do not know if i will sell any of them. I just sold a 67 swb wood floor bed last month and it brought $1000.00
I am still working on buildings and will be a little slow on replies. Bare with me. I still have a mess.
Thanks Steve

**STP67-72** · 11-28-2005, 12:23 AM

I will take a 100.00 for a good auto colomn. I think i have a black one. I will look, they are stashed in the red stepside bed. I will look.
Thanks Steve

**STP67-72** · 11-29-2005, 10:24 PM

ttt

GlennBrittain · 11-29-2005, 10:48 PM

Do any of your van tilts have a cruise control lever

**STP67-72** · 11-30-2005, 08:24 AM

I think there is a couple with cruise lever.Give me a few days to get back over there to look. My junk is spread every where due to storm. I will be takeing a lot of pics. when i can catch some daylight. Bare with me.

sub4rvr · 12-10-2005, 01:11 AM

Do you take PayPal ?

**STP67-72** · 12-10-2005, 10:05 AM

At this time i do not. I do not sell that much stuff, before now. I will ebay a lot of this in the future. i just have to much at this time. I am going to buy a good camera asap, because my camera s..... Let me know if i can help.

NitroMike · 01-04-2006, 02:45 PM

Steve,
I will deff. take the yellow auto high-hump trans cover. Please let me knwo final cost (zip 18018) and payment method prefered.

Thanks,
NitroMike

**w314speed** · 01-04-2006, 07:57 PM

Steve- Thanks again for the near perfect LWB bed. Your descriptions were right on the money. It exceeded my expectations. I am inclosing my email address so we may communicate on the other items we discussed. dpkratz@bellsouth.net. Thanks again, DAN

incoma · 01-04-2006, 09:46 PM

Have any extra 67-70 drive gear indicators that aren't broken?

**STP67-72** · 01-04-2006, 11:39 PM

Nitro How about 65.00 total. Money order. If shipping is less than that i will send the difference back to you.

W314speed Thanks for comment. I try to describe all of my parts the best that i can. I know that my word clean and other people's clean are completely different. I am told all the time that i am HIGH AS H--LL on some of my parts and sheetmetal, but let them run all over the country looking for this stuff. I have had over 100 of these trucks, so i do not have any problem selling parts and trucks. I also pay more for some of these trucks because i know what it is worth. If they don't want it i will keep it.
I do not think that the tank and valve are still there. He is checking on the dash switch.

Incoma I might have one for a non tilt, but i rebuild most of my van tilts and truck tilts.

incoma · 01-04-2006, 11:46 PM

I'm looking for one for a non-tilt. If you have one, I'm interested.

**STP67-72** · 01-05-2006, 12:14 AM

I will have to find my colomns. I moved them since i have been rebuilding my shops. Give me a chance to find them.

NitroMike · 01-05-2006, 09:11 AM

Steve,
Sounds great ($65) on the high-hump cover. What address should I use for the money order?
Thanks,
NitroMike

**w314speed** · 01-09-2006, 05:10 AM

Steve, I looked at the tool compartment door latch and its is not in very good shape. I will need the rest of the stuff that Tommy took off the door. Has he had any luck on the valve and switch. Thanks, Dan

**STP67-72** · 01-09-2006, 11:10 PM

I will start looking for the other box of parts. I have such a mess, it is going to be fun. He does not have the valve and he sent the switch to a member called mid year vette. I think that is what he said. Ask him if he got one from lafeyette and is it for sale. I do not think he was useing it.

Bubba4spd · 01-10-2006, 09:45 PM

Are the aluminum 8 hole rims in the background for sale? If so, at what cost?

**STP67-72** · 01-11-2006, 12:05 AM

That chevy truck wheel, i only have 3 for that set. I have several sets. I use them on some of the trucks i build and also on my car haulers. I will check and see if i have a set i will sell. Not for sure but some where around $250.00 plus shipping that would probably stink.

11-27-2005, 01:49 AM	#1
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Auto Steering Columns, Van Tilts, High Hump auto cover Regular Steering Columns $75.00 - $100.00 Van Tilts /no truck tilts or 4 speed tilts $150.00 High Hump Cover $50.00 I will take better pictures if requested Attached Images __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

11-27-2005, 03:16 AM	#2
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Price on a non-tilt auto column shift in : Black???? __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

11-27-2005, 09:19 AM	#3
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,049	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Put me in line for the orange bed if it is for sale? Thanks.

11-27-2005, 11:24 AM	#4
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Everybody is asking about the orange bed and it is not for sale. Yall would laugh at what i would have to have for it anyway. SWB wood floor ,oak kit and ss strips. I have several beds and at this time i do not know if i will sell any of them. I just sold a 67 swb wood floor bed last month and it brought $1000.00 I am still working on buildings and will be a little slow on replies. Bare with me. I still have a mess. Thanks Steve __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

11-28-2005, 12:23 AM	#5
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover I will take a 100.00 for a good auto colomn. I think i have a black one. I will look, they are stashed in the red stepside bed. I will look. Thanks Steve __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

11-29-2005, 10:24 PM	#6
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover ttt __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

11-29-2005, 10:48 PM	#7
GlennBrittain Senior Member Join Date: Jun 2003 Location: Panola County Texas Posts: 401	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Do any of your van tilts have a cruise control lever

11-30-2005, 08:24 AM	#8
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover I think there is a couple with cruise lever.Give me a few days to get back over there to look. My junk is spread every where due to storm. I will be takeing a lot of pics. when i can catch some daylight. Bare with me. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

12-10-2005, 01:11 AM	#9
sub4rvr Registered User Join Date: May 2000 Location: Palm Springs, Ca. Posts: 574	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Do you take PayPal ? __________________ 72 C10 Suburban 90 S10 57 F100 (2) 67 Mustang (2) 69 Torino GT 00 Mustang GT Conv.

12-10-2005, 10:05 AM	#10
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover At this time i do not. I do not sell that much stuff, before now. I will ebay a lot of this in the future. i just have to much at this time. I am going to buy a good camera asap, because my camera s..... Let me know if i can help. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

01-04-2006, 02:45 PM	#11
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Steve, I will deff. take the yellow auto high-hump trans cover. Please let me knwo final cost (zip 18018) and payment method prefered. Thanks, NitroMike __________________ The older I get, the faster I was!!

01-04-2006, 07:57 PM	#12
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Steve- Thanks again for the near perfect LWB bed. Your descriptions were right on the money. It exceeded my expectations. I am inclosing my email address so we may communicate on the other items we discussed. dpkratz@bellsouth.net. Thanks again, DAN

01-04-2006, 09:46 PM	#13
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Have any extra 67-70 drive gear indicators that aren't broken?

01-04-2006, 11:39 PM	#14
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Nitro How about 65.00 total. Money order. If shipping is less than that i will send the difference back to you. W314speed Thanks for comment. I try to describe all of my parts the best that i can. I know that my word clean and other people's clean are completely different. I am told all the time that i am HIGH AS H--LL on some of my parts and sheetmetal, but let them run all over the country looking for this stuff. I have had over 100 of these trucks, so i do not have any problem selling parts and trucks. I also pay more for some of these trucks because i know what it is worth. If they don't want it i will keep it. I do not think that the tank and valve are still there. He is checking on the dash switch. Incoma I might have one for a non tilt, but i rebuild most of my van tilts and truck tilts. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

01-04-2006, 11:46 PM	#15
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Auto Steering Columns, Van Tilts, High Hump auto cover I'm looking for one for a non-tilt. If you have one, I'm interested.



Register or Log In To remove these advertisements.

01-05-2006, 12:14 AM	#16
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover I will have to find my colomns. I moved them since i have been rebuilding my shops. Give me a chance to find them. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

01-05-2006, 09:11 AM	#17
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Steve, Sounds great ($65) on the high-hump cover. What address should I use for the money order? Thanks, NitroMike __________________ The older I get, the faster I was!!

01-09-2006, 05:10 AM	#18
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Steve, I looked at the tool compartment door latch and its is not in very good shape. I will need the rest of the stuff that Tommy took off the door. Has he had any luck on the valve and switch. Thanks, Dan

01-09-2006, 11:10 PM	#19
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover I will start looking for the other box of parts. I have such a mess, it is going to be fun. He does not have the valve and he sent the switch to a member called mid year vette. I think that is what he said. Ask him if he got one from lafeyette and is it for sale. I do not think he was useing it. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

01-10-2006, 09:45 PM	#20
Bubba4spd Registered User Join Date: Sep 2005 Location: S. Georgia Posts: 254	Re: Auto Steering Columns, Van Tilts, High Hump auto cover Are the aluminum 8 hole rims in the background for sale? If so, at what cost?

01-11-2006, 12:05 AM	#21
STP67-72 Senior Member Join Date: Jan 2002 Location: PORT NECHES, TEXAS / USA Posts: 1,667	Re: Auto Steering Columns, Van Tilts, High Hump auto cover That chevy truck wheel, i only have 3 for that set. I have several sets. I use them on some of the trucks i build and also on my car haulers. I will check and see if i have a set i will sell. Not for sure but some where around $250.00 plus shipping that would probably stink. __________________ 55 Chevy original swb (big back window) 61 Chevy bubble top (427-5 speed) 67 Chevy stepside (Krusty) 68 Chevy swb fleet (Lola) 68 Chevy swb fleet 71 Chevy swb fleet ( future PB project) 97 crew cab power stroke 07 SS Trail blazer

Register or Log In To remove these advertisements.