window regulator help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

THOR 50 · 12-09-2005, 12:50 AM

can anyone recommend replacement regulators by manufacturer, or are my originals rebuildable?

Longhorn Man · 12-09-2005, 01:00 AM

Long time no see Thor...what you been up to?

red71cheyenne · 12-09-2005, 01:18 AM

It can be done, but new ones are cheap. I paid $70 for a set from ****************. Jeff.

krue · 12-09-2005, 01:37 AM

I bought mine from GMCPauls and boy was it an improvement!

Here a thread in FAQ on the replacement.
http://www.67-72chevytrucks.com/vboa...d.php?t=157539
here's another
http://67-72chevytrucks.com/vboard/s...ad.php?t=83475

THOR 50 · 12-09-2005, 01:40 AM

L.M. - Lost my job (at MCI/WorldCon) and had to put the project on hold as well as my internet connection. Started driving her a little and found some new issues.
Jeff you remember who the manufacturer of those regulators was and are you happy with the quality?

krue thanks for the links, rebuilt the door insides once already with the old regulators, new felts etc. just need some input on quality replacement parts to shop the vendors or a good rebuild source.

68haywagon · 12-09-2005, 02:10 AM

I got my driver's side one from Ed at Mothertruckers and it works great.

Mike

red71cheyenne · 12-09-2005, 02:13 AM

Thor, I don't know who made them, but I am very happy with them. The windows roll up and down nice and easy and thats with new rubber all the way around. Jeff.

Fastfun · 12-09-2005, 06:45 PM

I bought a drivers side from Brothers trucks at the Pamona swap meet last week and they were GM for $25.00. that may have been a show special but it was GM.

Longhorn Man · 12-09-2005, 11:43 PM

Roger, sorry to hear about your job situation. I see you are underemploied now... hope things come together for you, it can be a b!tch.

neonlarry · 12-10-2005, 03:06 PM

I got one from ECE and it was worse than than the one I took out. I ended up taking it back and just rebuilt my old one, it works great now. My advice is stick with GM parts.

THOR 50 · 12-12-2005, 11:07 PM

where did you get your rebuild parts?

12-09-2005, 12:50 AM	#1
THOR 50 Over worked under paid Join Date: May 2001 Location: Fort Myers, Florida Posts: 378	window regulator help can anyone recommend replacement regulators by manufacturer, or are my originals rebuildable? __________________ Roger '69 C-10 with GMC front clip billet grill, 283CI, 400TH and 12bolt posiw/3.73 gears

12-09-2005, 01:00 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: window regulator help Long time no see Thor...what you been up to?

12-09-2005, 01:18 AM	#3
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: window regulator help It can be done, but new ones are cheap. I paid $70 for a set from ****************. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

12-09-2005, 01:37 AM	#4
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: window regulator help I bought mine from GMCPauls and boy was it an improvement! Here a thread in FAQ on the replacement. http://www.67-72chevytrucks.com/vboa...d.php?t=157539 here's another http://67-72chevytrucks.com/vboard/s...ad.php?t=83475 __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-09-2005, 01:40 AM	#5
THOR 50 Over worked under paid Join Date: May 2001 Location: Fort Myers, Florida Posts: 378	Re: window regulator help L.M. - Lost my job (at MCI/WorldCon) and had to put the project on hold as well as my internet connection. Started driving her a little and found some new issues. Jeff you remember who the manufacturer of those regulators was and are you happy with the quality? krue thanks for the links, rebuilt the door insides once already with the old regulators, new felts etc. just need some input on quality replacement parts to shop the vendors or a good rebuild source. __________________ Roger '69 C-10 with GMC front clip billet grill, 283CI, 400TH and 12bolt posiw/3.73 gears Last edited by THOR 50; 12-09-2005 at 01:59 AM.

12-09-2005, 02:10 AM	#6
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Re: window regulator help I got my driver's side one from Ed at Mothertruckers and it works great. Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

12-09-2005, 02:13 AM	#7
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: window regulator help Thor, I don't know who made them, but I am very happy with them. The windows roll up and down nice and easy and thats with new rubber all the way around. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

12-09-2005, 06:45 PM	#8
Fastfun Registered User Join Date: Jun 2005 Location: Scottsdale, AZ Posts: 615	Re: window regulator help I bought a drivers side from Brothers trucks at the Pamona swap meet last week and they were GM for $25.00. that may have been a show special but it was GM.

12-09-2005, 11:43 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: window regulator help Roger, sorry to hear about your job situation. I see you are underemploied now... hope things come together for you, it can be a b!tch.

12-10-2005, 03:06 PM	#10
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Re: window regulator help I got one from ECE and it was worse than than the one I took out. I ended up taking it back and just rebuilt my old one, it works great now. My advice is stick with GM parts. __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

12-12-2005, 11:07 PM	#11
THOR 50 Over worked under paid Join Date: May 2001 Location: Fort Myers, Florida Posts: 378	Re: window regulator help where did you get your rebuild parts? __________________ Roger '69 C-10 with GMC front clip billet grill, 283CI, 400TH and 12bolt posiw/3.73 gears



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.