![]() |
![]() |
#1 |
Jamie Hyneman is my twin
![]() Join Date: Nov 2005
Location: La Junta, Colorado
Posts: 705
|
Master cylinder help
My master cylinder will not pump and hold pressure on the front brakes. The back reservoir works fine, but the front will not.
Can a 1967 m/c be rebuild? Does it just have O-rings? Is it not worth the trouble? I have the M/C out of the pickup, have blown it out, and refilled a couple of times to remove debris. No change.
__________________
Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2001
Location: Meridian, Ms.
Posts: 244
|
Re: Master cylinder help
Just go to the parts store and buy a new one, they are pretty cheap ($15 or so). If you were closer I'd give you a new one that I have sitting in the shop. But by the time you pay shipping and wait on it I doubt it it is worth it.
__________________
70 C/10 SWB Go ahead chance it........Columbus did!!! Steve (Chitlin) Bacon My DIY Shop http://s24.photobucket.com/albums/c47/mpalmiter/shop/ |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,932
|
Re: Master cylinder help
go to the local autoparts store and get a new one, not a remaufactured one. They are pretty cheap and you wont have to worry about it. I think mine was under 30 bucks. I had converted mine to front disks so I used one off a 72 with power but I bet the price for yours will be the same.
I think mine is from Autozone. I purchased the reman first and it leaked and didnt work right so the new one was cheap enough that is what I have now. Dave
__________________
Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,932
|
Re: Master cylinder help
well yank you are a faster typer than I am.
dave
__________________
Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" |
![]() |
![]() |
![]() |
#5 |
Jamie Hyneman is my twin
![]() Join Date: Nov 2005
Location: La Junta, Colorado
Posts: 705
|
Re: Master cylinder help
Thanks guys. We'll get a new one coming.
See if you can beat this deal. I have agreed to buy this pickup from the Ag-shop teacher at the high school I work at, so his shop boys are doing all the work to get things running. Deal was $1000 for a running pickup. He picks up the tab till it runs, then I drive it home.
__________________
Justin SOLD 1967 K10 Fleetside, 283, Front and Rear Posi SOLD Color Wiring Diagrams Now in High Resolution V8 and Cab and Cab and Chassis |
![]() |
![]() |
![]() |
Bookmarks |
|
|