![]() |
![]() |
#1 |
Rottenwood Garage Member
Join Date: May 2005
Location: Marietta, Georgia
Posts: 4,321
|
My 72 Blazer project
Well, I have posted pics in the other rooms...so now its time for this one.
This 1972 Blazer was sitting behind a friends mothers house. It had 1992 plates on it. It belonged to my friends brother who died a few years back. When I brought it home it had set for 12 years. (outside). It had dry rotted 33" tires with rusted white wagon wheels on it. It is a 307, 2bbl , 4x4, 3 guage dash, originally three on the tree. It was changed to the floor at some time. WHY, WHY...I brought it home..checked the oil...put fuel and a battery in it and it started and i drove it arround the neighborhood!!!! Since I have several other projects going on, this one is on the back burner. I have done a complete brake job, tune up, new radiator and rebuilt the carb. I had that set of Ralleys so I threw them on it so it would fit on the car trailer. The condition of the body is at that point to where I dont know if she is going to get a nice average retoration or just a daily driver on 35's with 6 inches of lift!?!?! OPINIONS? Do you think I should leave the 3 in the floor, put it back in the column, or change it to an automatic??? THOUGHTS?? |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2004
Location: Northern AZ
Posts: 7,271
|
Re: My 72 Blazer project
Not sure of what it could be, but I am sure that you should give it to me, or at least let me buy it!! It looks like a good enough start, I'd clean it up and shoot it one color, preferably a flat color because it is a 4X4 and therefore should be used and abused as such!! I never have that kind of luck, I find em' I just have to pay for them and usually dearly to get them.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2005
Location: Colorado Springs
Posts: 693
|
Re: My 72 Blazer project
If it were me, it's already set up for a standard transmission I would get a M465 for it. The engine looks like it's been rebuilt or repainted it looks like it would make a good daily driver after some time and $. I'd keep it stock ride height and tire size for driveability and MPG besides a 307 and steep axle gearing with huge tires would not be fun, unless you plan on going to 4.10 or even 4.56 for 35's. How's that 307 run? Do you know what gear ratio it has?
__________________
1971 GMC K1500 SWB Fleetside, 4" skyjacker softride and, 14 Bolt FF, HD Dana 44 4.10's 1970 K5 TBI conversion lifted etc SOLD 1968 C20 camper truck SOLD “To ban guns because criminals use them is to tell the innocent and law-abiding that their rights and liberties depend not on their own conduct, but on the conduct of the guilty and the lawless.” Jeff Snyder |
![]() |
![]() |
![]() |
#4 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: My 72 Blazer project
Cool Blazer, I like the stick on the floor myself, never cared for the
3 on the tree, not to mention since it's convertable the floor shifter goes better with the flow, jmho, you can go to the 4wd sticky to see wheel, tire, and lift combo's to give you some perspective ![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#5 |
Rottenwood Garage Member
Join Date: May 2005
Location: Marietta, Georgia
Posts: 4,321
|
Re: My 72 Blazer project
I dont have any idea as to the gear ratio.....The engine seems to run good and really does not burn oil. I did a little engine comparment painting while I had the radiator out but it looks better in pictures than in person....
|
![]() |
![]() |
![]() |
#6 |
Back in the sticks
Join Date: Jan 2001
Location: Fordland, MO
Posts: 3,188
|
Re: My 72 Blazer project
Inside the glovebox there is a sticker that will tell you which rear end you have. If it hasn't been removed that is. I don't know though. I went for the 4 spd conversion on mine. It was like yours, 3 spd moved to the floor. I didn't like it and wanted the granny gear. If you like the 3 spd though, no reason not to keep it. Keep us updated, Jeff.
__________________
1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty |
![]() |
![]() |
![]() |
#7 |
Just like to part out trucks!!
Join Date: Nov 2001
Location: Meriden, Ks-North of Topeka 10 miles
Posts: 27,396
|
Re: My 72 Blazer project
Nice project, I'd move the shifter back to the column if it were me. I LOVE BLAZERSSSSSSS
![]()
__________________
67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" |
![]() |
![]() |
![]() |
#8 |
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,450
|
Re: My 72 Blazer project
Looks pretty good to me. If the floor shifter shifts ok I'd leave it there.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. ![]() We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
![]() |
![]() |
![]() |
#9 |
PROJECT 7DEUCE
![]() Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,608
|
Re: My 72 Blazer project
Looks like a great foundation to a great ride... Congrats..
__________________
GO BIG GREEN ![]() MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
![]() |
![]() |
![]() |
Bookmarks |
|
|