71 3/4 ton a/c auto. tilt for parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 02-16-2006, 03:47 PM

roazo heres the trim.

ol yellow 72 · 02-16-2006, 06:22 PM

bill if he passes on the headliner trim how much?

roazo · 02-16-2006, 08:44 PM

Is the trim plastic or metal?

billsbowtie · 02-16-2006, 09:13 PM

trim is plastic and it is $10.00 plus shipping.

billsbowtie · 02-16-2006, 09:16 PM

heavy d and botietruck here are 4 pieces of the door trim it has some rust on it but could be painted or maybe cleaned up some $10.00 a pair.

DTerry · 02-16-2006, 09:50 PM

Quote:

Originally Posted by billsbowtie

d terryi dont have any nice doors.

Thanks.

ol yellow 72 · 02-17-2006, 12:19 AM

bill i want it is razo passes

HeavyD · 02-17-2006, 01:22 AM

Rusty? Darn

I will pass to next in line.

cypressbog · 02-17-2006, 01:28 AM

How much for the drivers side motor hold down? Is it factory

*rage'nrat638* · 02-17-2006, 09:00 AM

rear tail light wiring harness.
possiable side mirrors
60504
thanks mark

billsbowtie · 02-17-2006, 10:56 AM

oldyellow72 i will put you in line.
cypressbog not f/s
rage'nrat rear wireing harness is no good. let me no if you still want mirrors shipping would be $10.00 to $12.00 on them.

roazo · 02-17-2006, 12:29 PM

I'll pass on the trim.

billsbowtie · 02-17-2006, 06:23 PM

Oldyellow72 I Will Send You A Pm.

billsbowtie · 02-17-2006, 06:42 PM

gabe clean out yuor pm box.

billsbowtie · 02-18-2006, 07:29 PM

head liner trim is SOLD.

sakohntr · 02-18-2006, 09:38 PM

How are the hubcaps???

GABE310 · 02-18-2006, 10:41 PM

Bill,
I cleaned out my PM box and sent you a PM.
Thanks,
Gabe

billsbowtie · 02-19-2006, 08:27 PM

there was no hub caps . anybody need anything else the body panels is only good for patches cab, bed, it does have a 350 trans. $125.00 . i want to sale the dis-brake ft.end and auto rear end with whats left of the body aftre i get dont with it .

billsbowtie · 02-19-2006, 09:32 PM

Lakewood90712 · 02-19-2006, 10:22 PM

Quote:

Originally Posted by cypressbog

How much for the drivers side motor hold down? Is it factory

It may be a GM part!!!!! In the early 70's that was the factory recall retrofit!!!!
I remember as a youngster , the chevy dealer installed hold-down chains on our '65 327 Impalla wagon .( some cars were crashing due to broken motor mounts causing stuck throttle and the dot told GM to recall) .

billsbowtie · 02-19-2006, 10:32 PM

the truck is a factory bb 396 truck . i think it still has the bb eng. stands and maybe the sb 350 doesn't fit rite.

*rage'nrat638* · 02-20-2006, 11:05 AM

Quote:

Originally Posted by billsbowtie

oldyellow72 i will put you in line.
cypressbog not f/s
rage'nrat rear wireing harness is no good. let me no if you still want mirrors shipping would be $10.00 to $12.00 on them.

yes bill i can get over the shipping on the mirrors
total please for both i am hoping there good right
p.m. sent

Luvlegs · 02-20-2006, 11:38 AM

IF it's a long bed, how's the inside box/passenger side/side lip to bed/ between the wheel tub and the headboard? Worth cutting out from lip - up say... 6"? That make sense? Wouldn't think it too big to ship either???

Luvlegs · 02-20-2006, 11:52 AM

pic might help...

Luvlegs · 02-20-2006, 12:02 PM

for clarification, the bedside part - finally, I think I got it clear????.... hahaha

02-16-2006, 03:47 PM	#26
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts roazo heres the trim.

02-16-2006, 06:22 PM	#27
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 211	Re: 71 3/4 ton a/c auto. tilt for parts bill if he passes on the headliner trim how much?

02-16-2006, 08:44 PM	#28
roazo Registered User Join Date: Nov 2004 Location: Easton, Mo Posts: 23	Re: 71 3/4 ton a/c auto. tilt for parts Is the trim plastic or metal? __________________ 71 SSWB 4X4(Converting a 72 Blazer to a pickup with a shortened 90 Stepside bed.) 96 Ext Cab C2500 Long Bed 7.4 L 06 HHR http://67-72chevytrucks.com/vboard/i...chevy_anim.gif

02-16-2006, 09:13 PM	#29
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts trim is plastic and it is $10.00 plus shipping.

02-16-2006, 09:16 PM	#30
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts heavy d and botietruck here are 4 pieces of the door trim it has some rust on it but could be painted or maybe cleaned up some $10.00 a pair.

02-17-2006, 12:19 AM	#32
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 211	Re: 71 3/4 ton a/c auto. tilt for parts bill i want it is razo passes

02-17-2006, 01:22 AM	#33
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: 71 3/4 ton a/c auto. tilt for parts Rusty? Darn I will pass to next in line. __________________ "You can take the man out of PA, but you can't take PA out of the man"

02-17-2006, 01:28 AM	#34
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: 71 3/4 ton a/c auto. tilt for parts How much for the drivers side motor hold down? Is it factory

02-17-2006, 09:00 AM	#35
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: 71 3/4 ton a/c auto. tilt for parts rear tail light wiring harness. possiable side mirrors 60504 thanks mark

02-17-2006, 10:56 AM	#36
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts oldyellow72 i will put you in line. cypressbog not f/s rage'nrat rear wireing harness is no good. let me no if you still want mirrors shipping would be $10.00 to $12.00 on them.

02-17-2006, 12:29 PM	#37
roazo Registered User Join Date: Nov 2004 Location: Easton, Mo Posts: 23	Re: 71 3/4 ton a/c auto. tilt for parts I'll pass on the trim. __________________ 71 SSWB 4X4(Converting a 72 Blazer to a pickup with a shortened 90 Stepside bed.) 96 Ext Cab C2500 Long Bed 7.4 L 06 HHR http://67-72chevytrucks.com/vboard/i...chevy_anim.gif

02-17-2006, 06:23 PM	#38
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts Oldyellow72 I Will Send You A Pm.

02-17-2006, 06:42 PM	#39
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts gabe clean out yuor pm box.

02-18-2006, 07:29 PM	#40
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts head liner trim is SOLD.

02-18-2006, 09:38 PM	#41
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: 71 3/4 ton a/c auto. tilt for parts How are the hubcaps??? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.



Register or Log In To remove these advertisements.

02-18-2006, 10:41 PM	#42
GABE310 Registered User Join Date: Mar 2001 Location: SOUTHERN,CA Posts: 429	Re: 71 3/4 ton a/c auto. tilt for parts Bill, I cleaned out my PM box and sent you a PM. Thanks, Gabe __________________ 68 CHEVY SWB 95 HARLEY DAVIDSON NOSTALGIA 68 CAMARO CONV 65 CHEVELLE CONV 39 CHEVY CABOVER

02-19-2006, 08:27 PM	#43
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts there was no hub caps . anybody need anything else the body panels is only good for patches cab, bed, it does have a 350 trans. $125.00 . i want to sale the dis-brake ft.end and auto rear end with whats left of the body aftre i get dont with it .

02-19-2006, 09:32 PM	#44
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts

02-19-2006, 10:32 PM	#46
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: 71 3/4 ton a/c auto. tilt for parts the truck is a factory bb 396 truck . i think it still has the bb eng. stands and maybe the sb 350 doesn't fit rite.

02-20-2006, 11:38 AM	#48
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 71 3/4 ton a/c auto. tilt for parts IF it's a long bed, how's the inside box/passenger side/side lip to bed/ between the wheel tub and the headboard? Worth cutting out from lip - up say... 6"? That make sense? Wouldn't think it too big to ship either??? __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

02-20-2006, 11:52 AM	#49
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 71 3/4 ton a/c auto. tilt for parts pic might help... Attached Images __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

02-20-2006, 12:02 PM	#50
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 71 3/4 ton a/c auto. tilt for parts for clarification, the bedside part - finally, I think I got it clear????.... hahaha __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew!

Register or Log In To remove these advertisements.