|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-24-2002, 08:45 PM
|
#1 |
|
Careful, they attack...
Join Date: Aug 2001
Location: Waterford, MI, USA
Posts: 1,107
|
Clutch linkage question
I have a complete clutch linkage from a doner, but when I put the bell crank in place it seems way too close to the frame. I'm supposed to have a braket on the frame that the other ball attatches to right? The engine side has a bracket that bolts to my 327 with no problem, is there something I am doing wrong. Guy I got it from said it was out of a V8 truck. He was going to auto and I was going to 4-spd. Seemed like a good thing to get at the time. Any idea if I can buy a frame bracket anywhere? Also, any one have a diagram of how it all goes together? I had a Chiltons manual around, but it is missing now.
|
|
|
|
04-24-2002, 09:30 PM
|
#2 |
|
Registered User
Join Date: Apr 2001
Location: Ivanhoe, MN USA
Posts: 32
|
ya there is supose to be a braket that is riveted to the frame to hold the other end of the shaft I'm going to a TH350 so I'll have one in a little while other wise ask on the parts board or go to a bone yard.
Ben ------------------ 70 chevy lwb 350 3on the tree
__________________
70 chevy c/10 lwb 350 TH350/under construction 91 chevy K1500 350 700r4 |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
