68 Gmc V6 ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 03-07-2006, 12:36 AM

I looked at this truck 9 months ago
67 I think but might be a 68 GMC lwb 1/2 V6, AT, AC, PS, PB, speed warning, buddy buckets, its been repainted long ago and paint is coming off now, some rust. How many 1/2 V6's are out there? If I get it bought I'd hate to part it out, but I've heard some V6 parts are hard to find, like the AT stuff, and AC stuff, and it does have some other good options. I've got the V6 website, but I haven't really ever been on it. I know need pics but I haven't had time to get over there again and look at it. I just wonder if its worth more complete or parted. Thanks for any help, Randy

**Bob B.** · 03-07-2006, 02:08 AM

As far as the engine is concerned, if it's a 305, parts are not too much trouble. Some parts for the 351 are tough to find, like pistons and carburetors. A '67 will have either a Pow-R-Flo (Powerglide) or Turbo 400 automatic. These are exactly the same as used on a Chevy pickup, they just used an adapter to mate the Chevy bolt pattern transmission to the GMC block. The V-6 A/C compressor mounting brackets are hard to find, but the compressor is the same as other Chevy pickups.

Brainchild · 03-07-2006, 03:02 AM

Parts seem to be hard to find,I'm still looking for the correct clutch plate for this 67 I have outside the shop here.Sure don't see may of them around here.I haven't really looked,but a clutch disc is nearly impossible.

Longhorn Man · 03-07-2006, 06:27 AM

My old SWB GMC originally had the 305 in it... but it was gone when I got it.

GMCPerson · 03-07-2006, 08:51 AM

I just purchased a 69 GMC K1500. It has a tach dash which I hope is going to be valuable.

**special-K** · 03-07-2006, 09:51 AM

Randy,At least try to sell complete first.That`s a pretty rare and unusual truck there.I`d think it could bring decent money "as is" to the right crowd,like Hemmings or the V6 clubs.

teeitup · 03-08-2006, 06:02 AM

Thanks guys, I'm going Monday to try to work a deal with him, I think he's wanting $3500 for it alone, it would be nice to restore, it doesn't have the glove box sticker unfortunately. There are pics on a thread of mine in this section "Looked at some other ones tonight". Thanks Randy

03-07-2006, 12:36 AM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	68 Gmc V6 ??? I looked at this truck 9 months ago 67 I think but might be a 68 GMC lwb 1/2 V6, AT, AC, PS, PB, speed warning, buddy buckets, its been repainted long ago and paint is coming off now, some rust. How many 1/2 V6's are out there? If I get it bought I'd hate to part it out, but I've heard some V6 parts are hard to find, like the AT stuff, and AC stuff, and it does have some other good options. I've got the V6 website, but I haven't really ever been on it. I know need pics but I haven't had time to get over there again and look at it. I just wonder if its worth more complete or parted. Thanks for any help, Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 03-07-2006 at 12:53 AM.

03-07-2006, 02:08 AM	#2
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,349	Re: 68 Gmc V6 ??? As far as the engine is concerned, if it's a 305, parts are not too much trouble. Some parts for the 351 are tough to find, like pistons and carburetors. A '67 will have either a Pow-R-Flo (Powerglide) or Turbo 400 automatic. These are exactly the same as used on a Chevy pickup, they just used an adapter to mate the Chevy bolt pattern transmission to the GMC block. The V-6 A/C compressor mounting brackets are hard to find, but the compressor is the same as other Chevy pickups. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

03-07-2006, 03:02 AM	#3
Brainchild Still drivin' a Rat Rod Join Date: Sep 2004 Location: Monett Missouri Posts: 4,925	Re: 68 Gmc V6 ??? Parts seem to be hard to find,I'm still looking for the correct clutch plate for this 67 I have outside the shop here.Sure don't see may of them around here.I haven't really looked,but a clutch disc is nearly impossible. __________________ Rusty Member #13872 Instead of saying.....you are a discomfort in the back of my front.....one should be able to say...... you are a pain in the a$# 71 GMC LWB 49 Chevy 85 Chevy G20 Check out my website

03-07-2006, 06:27 AM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: 68 Gmc V6 ??? My old SWB GMC originally had the 305 in it... but it was gone when I got it.

03-07-2006, 08:51 AM	#5
GMCPerson Junior Member Join Date: Oct 2003 Location: Milford, MI Posts: 192	Re: 68 Gmc V6 ??? I just purchased a 69 GMC K1500. It has a tach dash which I hope is going to be valuable.

03-07-2006, 09:51 AM	#6
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 68 Gmc V6 ??? Randy,At least try to sell complete first.That`s a pretty rare and unusual truck there.I`d think it could bring decent money "as is" to the right crowd,like Hemmings or the V6 clubs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-08-2006, 06:02 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 68 Gmc V6 ??? Thanks guys, I'm going Monday to try to work a deal with him, I think he's wanting $3500 for it alone, it would be nice to restore, it doesn't have the glove box sticker unfortunately. There are pics on a thread of mine in this section "Looked at some other ones tonight". Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.