1967 C10 Short Bed Frame And Other Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SK1970 · 03-18-2006, 07:37 PM

The Frame Has Been Sand Blasted And Painted With Eastwood's Rust Encapsulator And Eastwoods Chassis Black Over It. A 1985 Gmc Front Crossmember Has Been Installed With All New Front Suspension Parts. I Have New Brake Hoses And Calipers. New Trailing Arm Bushings. The Rearend Has Been Replaced With A 1972 3.08. Needs Tracking Arm And Shocks. I Am Also Including A Nice Set Of 5 Chrome Wheels With Bf Goodrich Radials. I Will Also Include A 1972 Chevy Air Cab That Needs Rockers And Cab Corners Replaced. I Do Not Have Time To Finish This Project And I Need The Space In My Basement. $1,000 Obo I Also Have A Nice Fleetside Short Bed For $450 And A 350 From A 1988 Chevy Truck With A Th350 Attached For $500 ( Motor Runs And It Is A Good Trans.) I Live Near Birmingham Al.

67stpside · 03-18-2006, 07:49 PM

man if you was alittle closer i would take that bed for sure.

qksilver · 03-18-2006, 11:36 PM

interested.............a couple of questions.
Does the frame have a dimple for the P/S, I am looking for a 67 that DOES not have a dimple. The 350 engine.......complete stock? roller cam and fuel injection?
Thanks,
Steve

SK1970 · 03-19-2006, 04:51 AM

I Am Not Sure What You Mean By A Dimple For The Power Steering. If You Are Talking About The Dimples On The Frame Where The Bolts Go That Hold On The Power Steering Box The Answer Is Yes. The Power Steering Box Came Off A 1985 Gmc Truck. The Motor Is Stock Except For An Edelbrock Intake. No Carburetor ,no Serpentine Belt System And No Starter.

QKENUF4U · 03-19-2006, 05:18 AM

man i would be all over tha bed if ya where closer.

qksilver · 03-19-2006, 12:33 PM

If the power steering box will bolt on flat against the frame, it means it has a dimple. The P/S box has is larger on the frame size, on most 67 frames the a P/S box will not blot flat because the don't have the clearance. They used a power assist ram on the center link. I am restoring a 67 and want the non dimpled frame.
Sounds like it has it, so i will pass.
Thanks,
Steve

**JDL** · 03-19-2006, 08:56 PM

PM me a # I need more info on bed. If you have more pics that would be great

SK1970 · 03-20-2006, 12:13 AM

The Bed Is From A 1972 And Is In Good Shape With Only Some Surface Rust. Thanks

SK1970 · 03-20-2006, 02:21 AM

Pictures Of Frame And Power Steering Box Below

RED67 · 03-20-2006, 08:49 AM

frame sold yet.....??

qksilver · 03-20-2006, 07:30 PM

Thanks for the pix, it looks like a great frame but it isn't what I need thanks..............
Steve

SK1970 · 03-20-2006, 07:42 PM

No I Have Not Sold Any Thing Yet.

SK1970 · 03-21-2006, 04:36 PM

It Is Hard To Believe That No One On This Board Needs This Frame For A Project.

djracer · 03-22-2006, 09:02 PM

I'll help this bama boy out!

SK1970 · 03-22-2006, 11:03 PM

Thanks Djracer I Found The Image Resizer Program FOR XP On Microsofts Web Site.

muddyole 69 · 03-23-2006, 08:55 AM

PM sent on bed thanks Mike

Beto · 03-23-2006, 11:16 AM

frame sold yet? whats the lowest you'll take for it, I'm located in Clanton, AL. Let me know...

SK1970 · 03-23-2006, 05:26 PM

Pm Sent To Beto

SK1970 · 03-23-2006, 05:48 PM

Muddyole 69 Is First In Line For The Bed But I Need To Sale The Frame
Thanks

Beto · 03-23-2006, 10:06 PM

Pm'd you back. I want to go look at it this Sunday and hopefully if all looks good, I'll buy it!

muddyole 69 · 03-23-2006, 11:11 PM

Beto I hope you buy it too cause it's the only way he is going to cut the bed loose to me

Mike

SK1970 · 03-26-2006, 10:00 PM

The Frame Has Not Sold. Beto Did Not Come To Look At It On Sunday. He Stated He Would Not Be Able To Buy It.

muddyole 69 · 03-26-2006, 10:37 PM

That sux anyway let me know on the bed thanks Mike

**Ron 586** · 03-27-2006, 02:02 AM

Could you pm me a phone # and when you can be reached. I'm interested in all. I have a few questions and I just had shoulder surgery. My 2 finger typing speed has been cut in half and you did say you needed the room. It'll be quicker to call. Click on link in Sig. to see my outside toy and parts department. I waited until now to contact to stay out of Beto deals way. Thanks

muddyole 69 · 03-27-2006, 04:54 AM

go for it ron all I need is the bed

Mike

03-18-2006, 07:49 PM	#2
67stpside Registered User Join Date: Jun 2005 Location: Indiana Posts: 33	Re: 1967 C10 Short Bed Frame And Other Parts man if you was alittle closer i would take that bed for sure.

03-18-2006, 11:36 PM	#3
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 1967 C10 Short Bed Frame And Other Parts interested.............a couple of questions. Does the frame have a dimple for the P/S, I am looking for a 67 that DOES not have a dimple. The 350 engine.......complete stock? roller cam and fuel injection? Thanks, Steve

03-19-2006, 04:51 AM	#4
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts I Am Not Sure What You Mean By A Dimple For The Power Steering. If You Are Talking About The Dimples On The Frame Where The Bolts Go That Hold On The Power Steering Box The Answer Is Yes. The Power Steering Box Came Off A 1985 Gmc Truck. The Motor Is Stock Except For An Edelbrock Intake. No Carburetor ,no Serpentine Belt System And No Starter.

03-19-2006, 05:18 AM	#5
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: 1967 C10 Short Bed Frame And Other Parts man i would be all over tha bed if ya where closer.

03-19-2006, 12:33 PM	#6
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 1967 C10 Short Bed Frame And Other Parts If the power steering box will bolt on flat against the frame, it means it has a dimple. The P/S box has is larger on the frame size, on most 67 frames the a P/S box will not blot flat because the don't have the clearance. They used a power assist ram on the center link. I am restoring a 67 and want the non dimpled frame. Sounds like it has it, so i will pass. Thanks, Steve

03-19-2006, 08:56 PM	#7
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,847	Re: 1967 C10 Short Bed Frame And Other Parts PM me a # I need more info on bed. If you have more pics that would be great __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

03-20-2006, 12:13 AM	#8
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts The Bed Is From A 1972 And Is In Good Shape With Only Some Surface Rust. Thanks

03-20-2006, 08:49 AM	#10
RED67 Forever Grateful Join Date: Mar 2001 Location: Forney,Texas Posts: 779	Re: 1967 C10 Short Bed Frame And Other Parts frame sold yet.....?? __________________ R.I.P Dad 04-07-42 - 05-27-09

03-20-2006, 07:30 PM	#11
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: 1967 C10 Short Bed Frame And Other Parts Thanks for the pix, it looks like a great frame but it isn't what I need thanks.............. Steve

03-20-2006, 07:42 PM	#12
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts No I Have Not Sold Any Thing Yet.

03-21-2006, 04:36 PM	#13
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts It Is Hard To Believe That No One On This Board Needs This Frame For A Project.

03-22-2006, 09:02 PM	#14
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	Re: 1967 C10 Short Bed Frame And Other Parts I'll help this bama boy out! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

03-22-2006, 11:03 PM	#15
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts Thanks Djracer I Found The Image Resizer Program FOR XP On Microsofts Web Site. Attached Images

03-23-2006, 08:55 AM	#16
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 1967 C10 Short Bed Frame And Other Parts PM sent on bed thanks Mike __________________ hav'n fun be'n me

03-23-2006, 11:16 AM	#17
Beto Registered User Join Date: Sep 2005 Location: Clanton, AL Posts: 26	Re: 1967 C10 Short Bed Frame And Other Parts frame sold yet? whats the lowest you'll take for it, I'm located in Clanton, AL. Let me know...



Register or Log In To remove these advertisements.

03-23-2006, 05:26 PM	#18
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts Pm Sent To Beto

03-23-2006, 05:48 PM	#19
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts Muddyole 69 Is First In Line For The Bed But I Need To Sale The Frame Thanks

03-23-2006, 10:06 PM	#20
Beto Registered User Join Date: Sep 2005 Location: Clanton, AL Posts: 26	Re: 1967 C10 Short Bed Frame And Other Parts Pm'd you back. I want to go look at it this Sunday and hopefully if all looks good, I'll buy it!

03-23-2006, 11:11 PM	#21
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 1967 C10 Short Bed Frame And Other Parts Beto I hope you buy it too cause it's the only way he is going to cut the bed loose to me Mike __________________ hav'n fun be'n me

03-26-2006, 10:00 PM	#22
SK1970 Active Member Join Date: Sep 2003 Location: ALABAMA Posts: 110	Re: 1967 C10 Short Bed Frame And Other Parts The Frame Has Not Sold. Beto Did Not Come To Look At It On Sunday. He Stated He Would Not Be Able To Buy It.

03-26-2006, 10:37 PM	#23
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 1967 C10 Short Bed Frame And Other Parts That sux anyway let me know on the bed thanks Mike __________________ hav'n fun be'n me

03-27-2006, 02:02 AM	#24
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,150	Re: 1967 C10 Short Bed Frame And Other Parts Could you pm me a phone # and when you can be reached. I'm interested in all. I have a few questions and I just had shoulder surgery. My 2 finger typing speed has been cut in half and you did say you needed the room. It'll be quicker to call. Click on link in Sig. to see my outside toy and parts department. I waited until now to contact to stay out of Beto deals way. Thanks __________________ Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket Last edited by Ron 586; 03-27-2006 at 02:04 AM.

03-27-2006, 04:54 AM	#25
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: 1967 C10 Short Bed Frame And Other Parts go for it ron all I need is the bed Mike __________________ hav'n fun be'n me

Register or Log In To remove these advertisements.