|
05-09-2006, 11:34 AM
|
#1 |
|
Registered User
Join Date: May 2006
Location: Co
Posts: 19
|
dam rattles
Is there any way to make the transfer case linkage not rattle so much, its really starting to bug me. Also how do you adjust the clutch. The clutch linage rattles when the truck is running but if i push in the clutch petal about 1/4" it stops.
__________________
79 K20 Long Bed |
|
|
|
05-09-2006, 12:17 PM
|
#2 |
|
Insert Witty Text Here
Join Date: Oct 2002
Location: San Antonio, TX
Posts: 3,415
|
Re: dam rattles
Are you sure you don't have a bad throwout bearing? I recall them being noisy when they go bad, and that applying a little pressure to the pedal makes them go quiet.
Slonaker |
|
|
|
|
05-09-2006, 12:25 PM
|
#3 |
|
Registered User
Join Date: May 2006
Location: Co
Posts: 19
|
Re: dam rattles
it could be a throw out bearing because the clutch is almost gone but its not a grinding noise, its more of a clunk clunk noise like the linkage is to far apart but i really dont know, im havent worked on something this old and i've never seen a rod actuated clutch before, i guess im a youngin
__________________
79 K20 Long Bed |
|
|
|
|
05-09-2006, 12:47 PM
|
#4 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Re: dam rattles
The rod linkage is adjustable. You can get underneith and lengthen the rod so it won't rattle. Also grease your Z-bar (you'll know what it is when you see it), as they break if they arn't regularly lubed up.
Only way to make the t-case linkage stop rattling is to replace all the bushings and stuff to solidify it.
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
 |
| Bookmarks |
|
|
)
Linear Mode
