Looking For Pics Of Sealed Cowl Vents - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 05-09-2006, 05:45 PM

Does anyone have any pictures cowl with the top air grill/vents sealed off. Or a Smooth Cowl? Thx

RicksTrucks · 05-09-2006, 10:03 PM

I think XXL did his that way.

jugernot · 05-10-2006, 01:13 AM

Yah, I have sent him a PM, but he doesn't have any close up pic of this cowl.

camaro__thunder · 05-10-2006, 01:19 AM

WISH IT WAS MINE..

carrzy4 · 05-10-2006, 01:21 AM

I never even thought of that. looks good doesnt it.

Homeboy · 05-10-2006, 02:56 AM

Here are a couple of pics of my cowl after filling. We cut out the slots, and welded in patch panels. Be sure you do this with the cowl still attached to the truck, it will twist almost a full turn if it is unbolted.

Kevin

carrzy4 · 05-10-2006, 02:57 AM

looks damn good!

longhorn70gmc · 05-10-2006, 04:57 AM

Different!
I LIKE IT!
Respectfully

Longhorn Man · 05-10-2006, 05:14 AM

You going to seal off the defroster vents and remove the heater too, of are you getting air from somewhere else now?

Rokcrln · 05-10-2006, 08:18 AM

This one is not only shaved but also full molded into the body! Not mine

Kevin
LFD Inc.

ebfabman · 05-10-2006, 08:23 AM

Thats Brads blazer in Edmond Oklahoma. He is a member here.

Flat 67 · 05-10-2006, 10:46 PM

Wishing it were mine.............Flat 67

taylorde · 05-10-2006, 10:52 PM

Man that is SWEET!!!!!!!!!!!!!

sweet572 · 05-11-2006, 12:29 AM

are the vents there for a reason or is it ok to seal them up ?

Homeboy · 05-11-2006, 12:54 AM

sweet,

The vents are there to let leaves, dirt, trash and water into the body, so we can all learn how to fix the ensuing rust.
I have taken out the old A/C and heater, and am using a HotRod Air system that mounts under the dash. The hoses pass through the firewall via a bulkhead. Really cleans up under the hood.

Kevin

bartstoy · 05-13-2006, 11:55 PM

Ohhh, dang. I just finished repairing the leaves, dirt, and trash damage. Also had to redo the windshield washer tubing etc. The job sucks. After seeing these pictures never again. Where do I find out about Hot Rod Air systems?

FRENCHBLUE72 · 05-13-2006, 11:58 PM

Heres mine...

05-09-2006, 05:45 PM	#1
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Looking For Pics Of Sealed Cowl Vents Does anyone have any pictures cowl with the top air grill/vents sealed off. Or a Smooth Cowl? Thx __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

05-09-2006, 10:03 PM	#2
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: Looking For Pics Of Sealed Cowl Vents I think XXL did his that way. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

05-10-2006, 01:13 AM	#3
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Looking For Pics Of Sealed Cowl Vents Yah, I have sent him a PM, but he doesn't have any close up pic of this cowl. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

05-10-2006, 01:19 AM	#4
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: Looking For Pics Of Sealed Cowl Vents WISH IT WAS MINE.. __________________ My Project 69 SWB SHAVED BAGGED DOORED

05-10-2006, 01:21 AM	#5
carrzy4 Active Member Join Date: Feb 2006 Location: BC Canada Posts: 152	Re: Looking For Pics Of Sealed Cowl Vents I never even thought of that. looks good doesnt it. __________________ S.h.i.t happens when you party naked.

05-10-2006, 02:56 AM	#6
Homeboy Registered User Join Date: Feb 2002 Location: Canyon, Tx. Posts: 62	Re: Looking For Pics Of Sealed Cowl Vents Here are a couple of pics of my cowl after filling. We cut out the slots, and welded in patch panels. Be sure you do this with the cowl still attached to the truck, it will twist almost a full turn if it is unbolted. Kevin __________________ "Where would we be without the agitators of the world attaching the electrodes of knowledge to the nipples of ignorance?"

05-10-2006, 02:57 AM	#7
carrzy4 Active Member Join Date: Feb 2006 Location: BC Canada Posts: 152	Re: Looking For Pics Of Sealed Cowl Vents looks damn good! __________________ S.h.i.t happens when you party naked.

05-10-2006, 04:57 AM	#8
longhorn70gmc Senior Member Join Date: Feb 2001 Location: Ridgecrest. CA, USA Posts: 1,715	Re: Looking For Pics Of Sealed Cowl Vents Different! I LIKE IT! Respectfully __________________ Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! *I need another truck like I need another hole in the head!* I'M IN THE MARKET...AS IT WERE!

05-10-2006, 05:14 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Looking For Pics Of Sealed Cowl Vents You going to seal off the defroster vents and remove the heater too, of are you getting air from somewhere else now? Last edited by Longhorn Man; 05-10-2006 at 05:15 AM.

05-10-2006, 08:18 AM	#10
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Looking For Pics Of Sealed Cowl Vents This one is not only shaved but also full molded into the body! Not mine Kevin LFD Inc. Attached Images

05-10-2006, 08:23 AM	#11
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: Looking For Pics Of Sealed Cowl Vents Thats Brads blazer in Edmond Oklahoma. He is a member here.

05-10-2006, 10:46 PM	#12
Flat 67 Junior Member Join Date: Sep 2005 Location: Fresno,California Posts: 224	Re: Looking For Pics Of Sealed Cowl Vents Wishing it were mine.............Flat 67 Attached Images

05-10-2006, 10:52 PM	#13
taylorde Just A Tool Hand Join Date: Jan 2006 Location: Lovington,New Mexico Posts: 70	Re: Looking For Pics Of Sealed Cowl Vents Man that is SWEET!!!!!!!!!!!!! __________________ :hit:

05-11-2006, 12:29 AM	#14
sweet572 Registered User Join Date: Jan 2006 Location: sin cal Posts: 44	Re: Looking For Pics Of Sealed Cowl Vents are the vents there for a reason or is it ok to seal them up ?

05-11-2006, 12:54 AM	#15
Homeboy Registered User Join Date: Feb 2002 Location: Canyon, Tx. Posts: 62	Re: Looking For Pics Of Sealed Cowl Vents sweet, The vents are there to let leaves, dirt, trash and water into the body, so we can all learn how to fix the ensuing rust. I have taken out the old A/C and heater, and am using a HotRod Air system that mounts under the dash. The hoses pass through the firewall via a bulkhead. Really cleans up under the hood. Kevin __________________ "Where would we be without the agitators of the world attaching the electrodes of knowledge to the nipples of ignorance?"



Register or Log In To remove these advertisements.

05-13-2006, 11:55 PM	#16
bartstoy Registered User Join Date: Feb 2004 Location: El Cajon, Cal. Posts: 75	Re: Looking For Pics Of Sealed Cowl Vents Ohhh, dang. I just finished repairing the leaves, dirt, and trash damage. Also had to redo the windshield washer tubing etc. The job sucks. After seeing these pictures never again. Where do I find out about Hot Rod Air systems? __________________ Original owner '69 C20, long, fleet. 454 BB with Edelbrock stuff. Work truck for years, 2nd restoration going on. '69 C20 '03 Tahoe Z71 70 Hp Johnson pushing aluminum bass boat. All things in life are uncertain, so eat dessert first.

05-13-2006, 11:58 PM	#17
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Looking For Pics Of Sealed Cowl Vents Heres mine... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.