![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
|
For those doing manual to Auto, can someone clarify flexplate bolting please.
The flexplate has recessed area's where it bolts to the torque converter...just so I don't bolt it in backwards I thought I'd ask the dumb question. Maybe this will be helpful for others as well.
In the first picture, should this be the side out (away from the engine) when it is bolted the crank? Or is it the second picture that should be facing you when bolted to the crank? Thanks...this old tile setter needs some help mechanically from time to time! Last edited by ChevyDude; 05-15-2006 at 03:25 PM. |
![]() |
![]() |
![]() |
#2 |
Truck junkie
![]() Join Date: May 2006
Location: Reno NV
Posts: 697
|
Re: For those doing manual to Auto, can someone clarify flexplate bolting please.
In the middle of any flex plate there is a small tapered flange. the taper faces away from the crank shaft which should put your torque converter on the raised side of those recesses.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2004
Location: Pleasanton, TX
Posts: 1,723
|
Re: For those doing manual to Auto, can someone clarify flexplate bolting please.
yep. the recesses "reach out" to meet the torque converter, if that makes sense.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
|
Re: For those doing manual to Auto, can someone clarify flexplate bolting please.
Yep, perfect...both responces tell the story well!! Thanks guys!!!
![]() |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,254
|
Re: For those doing manual to Auto, can someone clarify flexplate bolting please.
You need new bolts too to bolt the flex plate to the crank shaft. Your manual ones are too long. Ask me how I know.
I was lucky. I had a 350 with no home sitting in the shop when I was bolting my th350 in place of my 3-speed manual. The flex plate was still on the spare engine so I had the right bolts.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
|
Re: For those doing manual to Auto, can someone clarify flexplate bolting please.
I knew that, but thanks. New bolts from ARP are on the way from Summit. I also needed Metric bolts to bolt up my Dacco torque Converter.
|
![]() |
![]() |
![]() |
#7 | |
blood type; Retumbo
Join Date: Jan 2004
Location: next to my reloading bench
Posts: 10,269
|
Re: For those doing manual to Auto, can someone clarify flexplate bolting please.
Quote:
|
|
![]() |
![]() |
![]() |
#8 | |
Senior Member
Join Date: Jun 2003
Location: Westminster, CO
Posts: 3,071
|
Re: For those doing manual to Auto, can someone clarify flexplate bolting please.
Quote:
Good tip there...I paid a lil' more coming from Summit...oh well. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|