gas filler and SHAVED GMC tailgate...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

QKENUF4U · 05-22-2006, 11:04 PM

got a short bed off DOUG this weekend and it has a GMC tailgate on it. the gate is straight and rust free, its already been shaved (handle is gone and hole filled) you will need to finish the job (relocating handle inside ?) i found the gate i need tonight so this one needs to go to pay for the new one.
60$ plus the ride. (never shipped anything this big, have to use UPS ???)
also have a WILLIAMS STREET ROD gas door setup. i tried to make it work with my blazer tank but it wont work the way i want it to (was gonna sink into floor but its 3"+deep and would hang down 5"+ with the hose on it).

this is the site.........

http://williamsstreetrods.com/fueldoors.html

i have already welded the gas cap collar in place (ok weld,dont have gas for welder

) but that wont affect anything since it will be hidden. as you can see they are 100$+ ill take 60$ shipped. mine is the square panel with round door (FLAT ROUND 90) that little black peice sticking up is the spring loaded magnet, you push the door and it pops up. pretty cool. wish i could use it.

thanks
lance

Chris H · 05-22-2006, 11:33 PM

PM on its way re: tailgate

72armyswbtruck · 05-23-2006, 12:13 AM

second in line please...

aitch · 05-23-2006, 05:52 AM

Third? on the tailgate.

05-22-2006, 11:04 PM	#1
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	gas filler and SHAVED GMC tailgate...... got a short bed off DOUG this weekend and it has a GMC tailgate on it. the gate is straight and rust free, its already been shaved (handle is gone and hole filled) you will need to finish the job (relocating handle inside ?) i found the gate i need tonight so this one needs to go to pay for the new one. 60$ plus the ride. (never shipped anything this big, have to use UPS ???) also have a WILLIAMS STREET ROD gas door setup. i tried to make it work with my blazer tank but it wont work the way i want it to (was gonna sink into floor but its 3"+deep and would hang down 5"+ with the hose on it). this is the site......... http://williamsstreetrods.com/fueldoors.html i have already welded the gas cap collar in place (ok weld,dont have gas for welder ) but that wont affect anything since it will be hidden. as you can see they are 100$+ ill take 60$ shipped. mine is the square panel with round door (FLAT ROUND 90) that little black peice sticking up is the spring loaded magnet, you push the door and it pops up. pretty cool. wish i could use it. thanks lance Attached Images Last edited by QKENUF4U; 05-23-2006 at 01:14 AM.

05-22-2006, 11:33 PM	#2
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	Re: gas filler and SHAVED GMC tailgate...... PM on its way re: tailgate __________________ Chris H 72 C30 133" 72 C30 157" flat-dump 69 C10 short fleet 71 ElCamino 2000 K2500 crewcab shortbed (sold, sorry old friend) 2005 GMC 2500HD shortcrew Duramax 2006 K1500 RCSB and a couple other projects/parts

05-23-2006, 12:13 AM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: gas filler and SHAVED GMC tailgate...... second in line please... __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

05-23-2006, 05:52 AM	#4
aitch Senior Member Join Date: Sep 2004 Location: N.W. Arkansas Posts: 456	Re: gas filler and SHAVED GMC tailgate...... Third? on the tailgate. __________________ 69 GMC 3/4 ton LWB 383 TH400 Dana 60 '84 300ZX '79 Nova (for sale)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.