Fs 4x4 Rolling Chassis Lower Price - The 1947 - Present Chevrolet & GMC Truck Message Board Network

otef546 · 07-17-2006, 04:11 PM

1970 GMC 3/4 ton rolling chassis.I plan on keeping the bed and scrapping the rest of the body.The truck was built by Truck Equipment Company, it had a tag in the door along with the GM tag with a date of 3-70 and a vin#.The chassis is complete except for the front driveshaft.Trans is a 4-speed and transfer case I believe is a NP 205.The front end is a Dana 44 positrac.The rear is a Dana 60 maximum traction both with 4.55 gear ratios.The truck has a P.T.O. coming off the 4-speed trans going to a winch on the front bumper.Also have all 4 factory 8" wide wheels.Truck has factory power steering set up and also have the factory rad. shroud. The eng is a 307 which is not running.My job keeps me away from from home for 36-40 hrs at a time so please be patient with a response. I lowered the price to 800.00 or shoot me an offer.Thanks Mike

otef546 · 07-17-2006, 04:15 PM

more pics

**special-K** · 07-18-2006, 07:08 AM

Man,I like that whole truck.You just want the utility bed?It reminds me of my good ol`71:

What are you putting the body on?

otef546 · 07-18-2006, 03:25 PM

special-k I was going to save the bed for future use.The rest of the body is ate up with cancer.The guy I bought it from left it outside with the windows down for the past five years.I was going to build a 4wd but changed my mind .I wish someone would make use of it.Mike

otef546 · 07-21-2006, 01:21 AM

no one insterested??? any offers ?????? ttt

6772king · 07-28-2006, 05:00 PM

sent you a pm ,,, since your in arkansas i assume the frame is very nice... is it ?? could you get me some pics of it and doe you allready have the body off it ... I can take it with it if it makes it easier for you ( the body) thanks Sean

07-17-2006, 04:11 PM	#1
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Fs 4x4 Rolling Chassis Lower Price 1970 GMC 3/4 ton rolling chassis.I plan on keeping the bed and scrapping the rest of the body.The truck was built by Truck Equipment Company, it had a tag in the door along with the GM tag with a date of 3-70 and a vin#.The chassis is complete except for the front driveshaft.Trans is a 4-speed and transfer case I believe is a NP 205.The front end is a Dana 44 positrac.The rear is a Dana 60 maximum traction both with 4.55 gear ratios.The truck has a P.T.O. coming off the 4-speed trans going to a winch on the front bumper.Also have all 4 factory 8" wide wheels.Truck has factory power steering set up and also have the factory rad. shroud. The eng is a 307 which is not running.My job keeps me away from from home for 36-40 hrs at a time so please be patient with a response. I lowered the price to 800.00 or shoot me an offer.Thanks Mike Attached Images

07-17-2006, 04:15 PM	#2
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: Fs 4x4 Rolling Chassis Lower Price more pics Attached Images

07-18-2006, 07:08 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Fs 4x4 Rolling Chassis Lower Price Man,I like that whole truck.You just want the utility bed?It reminds me of my good ol`71: What are you putting the body on? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-18-2006, 03:25 PM	#4
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: Fs 4x4 Rolling Chassis Lower Price special-k I was going to save the bed for future use.The rest of the body is ate up with cancer.The guy I bought it from left it outside with the windows down for the past five years.I was going to build a 4wd but changed my mind .I wish someone would make use of it.Mike

07-21-2006, 01:21 AM	#5
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: Fs 4x4 Rolling Chassis Lower Price no one insterested??? any offers ?????? ttt

07-28-2006, 05:00 PM	#6
6772king Registered User Join Date: Feb 2002 Location: grove city pa usa Posts: 628	Re: Fs 4x4 Rolling Chassis Lower Price sent you a pm ,,, since your in arkansas i assume the frame is very nice... is it ?? could you get me some pics of it and doe you allready have the body off it ... I can take it with it if it makes it easier for you ( the body) thanks Sean __________________ 67 chevy short step 2wd 427 71 chevy short fleet 4x4 396 72 gmc jimmy 2wd 377 71 chevy blazer 4x4 454 69 chevy longhorn 5.9l cummins 72 chevy 400 2wd custom camper 67 chevy lwb 4x4 454-in pieces 67 chevy panel soon 4x4-400 67 gmc dump 4x4 1 ton-305 WTF!! 72 chevy 3/4 ton 4x4 burb 350 70 chevy panel 2wd 302 5 speed tko "THERE IS NO REPLACMENT FOR DISPLACMENT"!!!!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.