Front Fender interchanges? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dstrbd71 · 07-23-2006, 08:01 PM

I was wondering if 71' fenders would interchange with my 67' . Also have doors off of a 71' . Will they all interchange from 67' to 72' ?

ChevyCrazy67 · 07-23-2006, 09:32 PM

They will bolt up with no problem, but if your gonna stay with the original 67 look you will have to do something about the marker lights on the 71 fenders.

ChevyCrazy67 · 07-23-2006, 09:35 PM

missed the other half of your question. The doors will swap out also. again if your staying with the 67 theme the mirrors door panels ect. won't be the same but the door shell will bolt up.

Longhorn Man · 07-23-2006, 10:03 PM

nope.
If you intend on keeping the 67 grill, then the 71 fenders will NOT work. The leading edge chainged in 69.
The doors will work, but you'll need to drill some holes and install some captured nuts to secure the door panels and maybe arm rests if you are including them on your rig.

Sweet72 · 07-23-2006, 10:03 PM

I'm pretty shure the "eyebrow" (front edge around headlight) of the fenders is stamped differently on the 69-72 Chevy.

dstrbd71 · 07-23-2006, 10:41 PM

thanks for the 411. I thought the front of the fenders on the 71' looked a bit different around the front eyebrows.

07-23-2006, 08:01 PM	#1
dstrbd71 Registered User Join Date: Jun 2006 Location: N.P, Nebraska Posts: 32	Front Fender interchanges? I was wondering if 71' fenders would interchange with my 67' . Also have doors off of a 71' . Will they all interchange from 67' to 72' ? __________________ 1967 Chevy Stepside Shortbox 1995 Chevy Silverado 4X4 1956 Chevy 210 post Delray

07-23-2006, 09:32 PM	#2
ChevyCrazy67 Senior Member Join Date: Dec 2005 Location: Dothan Alabama Posts: 2,604	Re: Front Fender interchanges? They will bolt up with no problem, but if your gonna stay with the original 67 look you will have to do something about the marker lights on the 71 fenders. __________________ Kevin 1967 C-10 swb fleetside 1968 C-10 stepside 1999 Z71- sons dd 1999 2wd silverado-my dd 2003 Tahoe- wifes dd

07-23-2006, 09:35 PM	#3
ChevyCrazy67 Senior Member Join Date: Dec 2005 Location: Dothan Alabama Posts: 2,604	Re: Front Fender interchanges? missed the other half of your question. The doors will swap out also. again if your staying with the 67 theme the mirrors door panels ect. won't be the same but the door shell will bolt up. __________________ Kevin 1967 C-10 swb fleetside 1968 C-10 stepside 1999 Z71- sons dd 1999 2wd silverado-my dd 2003 Tahoe- wifes dd

07-23-2006, 10:03 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Front Fender interchanges? nope. If you intend on keeping the 67 grill, then the 71 fenders will NOT work. The leading edge chainged in 69. The doors will work, but you'll need to drill some holes and install some captured nuts to secure the door panels and maybe arm rests if you are including them on your rig.

07-23-2006, 10:03 PM	#5
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: Front Fender interchanges? I'm pretty shure the "eyebrow" (front edge around headlight) of the fenders is stamped differently on the 69-72 Chevy. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

07-23-2006, 10:41 PM	#6
dstrbd71 Registered User Join Date: Jun 2006 Location: N.P, Nebraska Posts: 32	Re: Front Fender interchanges? thanks for the 411. I thought the front of the fenders on the 71' looked a bit different around the front eyebrows. __________________ 1967 Chevy Stepside Shortbox 1995 Chevy Silverado 4X4 1956 Chevy 210 post Delray



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.