WTB: Ignition sw assembly, parking lights, etc. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72lb4x4* · 08-09-2006, 08:03 PM

I don't talk much, so this will be brief...

In order of importance:

One or two parking lights for a 72.
Decent dash bezel--7 hole, no choke.
An ignition switch (ideally with a key), bezel, backing plate, etc.
Center grill bracket for a 72 truck.
Complete steering column and wheel for a floor shift.
Shifter boots and retaining rings in a pic above. I need boots and rings for a 4 speed and transfer case shifter.

Let me know if something is available. I'll mail a check, money order, Paypal, or?

I'm in the 76051 zip code...

billsbowtie · 08-09-2006, 08:45 PM

i have the 2 park lights $20.00
i have the steering colum but the steering wheel is cracked $50.00
and i think i have the center grille suport $10.00.
if you are interested in these i will get pics. and shipping cost.

billsbowtie · 08-09-2006, 08:58 PM

colum

billsbowtie · 08-09-2006, 09:02 PM

lights/lens/housings/pig tails.

*72lb4x4* · 08-09-2006, 09:06 PM

Ok, a few brighter pics of the column would be good too. Can you pop the wheel off the column for shipping?
What color is the column (not that it matters much)?
More pics appearing as I watch, cool!
Oh, is the wiring and sockets ok on the lights?
I'm in 76051

billsbowtie · 08-09-2006, 09:21 PM

colum is black it could use a coat of paint. i can get more pics. tomarrow. it came out of a 3/4 ton 4 speed truck.lights are good driver shape pig tails and sockets look good.

*72lb4x4* · 08-09-2006, 09:30 PM

Sounds good. Let me know the shipping.
The column is in reasonably good shape other than the cracked wheel?
Horn button?
I also need a decent dash bezel--7 hole, no choke.

Mine was painted a sort of Chevy orange. The gentle stripper was working too slow so I used some spray on stripper. Now it looks like its got radiation poisoning : (

billsbowtie · 08-09-2006, 09:39 PM

i will check horn buttom. yes colum is good shape. i only have a non gauge dash bezel at this time.

billsbowtie · 08-09-2006, 09:47 PM

i found this pic. of when it was still in the truck.

billsbowtie · 08-10-2006, 04:05 PM

billsbowtie · 08-10-2006, 04:05 PM

billsbowtie · 08-10-2006, 04:06 PM

horn button

billsbowtie · 08-10-2006, 04:06 PM

grille suport.

billsbowtie · 08-10-2006, 04:15 PM

pm sent with shipping cost.

billsbowtie · 08-15-2006, 08:36 PM

[dash bezel]i picked this one up today if you still need one i can ship it with your other parts $25.00.

billsbowtie · 08-15-2006, 08:40 PM

circit looks good.

08-09-2006, 08:03 PM	#1
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	WTB: Ignition sw assembly, parking lights, etc. I don't talk much, so this will be brief... In order of importance: One or two parking lights for a 72. Decent dash bezel--7 hole, no choke. An ignition switch (ideally with a key), bezel, backing plate, etc. Center grill bracket for a 72 truck. Complete steering column and wheel for a floor shift. Shifter boots and retaining rings in a pic above. I need boots and rings for a 4 speed and transfer case shifter. Let me know if something is available. I'll mail a check, money order, Paypal, or? I'm in the 76051 zip code... Last edited by 72lb4x4; 08-09-2006 at 09:26 PM.

08-09-2006, 08:45 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. i have the 2 park lights $20.00 i have the steering colum but the steering wheel is cracked $50.00 and i think i have the center grille suport $10.00. if you are interested in these i will get pics. and shipping cost.

08-09-2006, 08:58 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. colum

08-09-2006, 09:02 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. lights/lens/housings/pig tails.

08-09-2006, 09:06 PM	#5
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: WTB: Ignition sw assembly, parking lights, etc. Ok, a few brighter pics of the column would be good too. Can you pop the wheel off the column for shipping? What color is the column (not that it matters much)? More pics appearing as I watch, cool! Oh, is the wiring and sockets ok on the lights? I'm in 76051 Last edited by 72lb4x4; 08-09-2006 at 09:09 PM.

08-09-2006, 09:21 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. colum is black it could use a coat of paint. i can get more pics. tomarrow. it came out of a 3/4 ton 4 speed truck.lights are good driver shape pig tails and sockets look good.

08-09-2006, 09:30 PM	#7
72lb4x4 Account Suspended Join Date: Jul 2006 Location: DFW Posts: 1,427	Re: WTB: Ignition sw assembly, parking lights, etc. Sounds good. Let me know the shipping. The column is in reasonably good shape other than the cracked wheel? Horn button? I also need a decent dash bezel--7 hole, no choke. Mine was painted a sort of Chevy orange. The gentle stripper was working too slow so I used some spray on stripper. Now it looks like its got radiation poisoning : (

08-09-2006, 09:39 PM	#8
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. i will check horn buttom. yes colum is good shape. i only have a non gauge dash bezel at this time.

08-09-2006, 09:47 PM	#9
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. i found this pic. of when it was still in the truck.

08-10-2006, 04:05 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc.

08-10-2006, 04:06 PM	#12
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. horn button

08-10-2006, 04:15 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. pm sent with shipping cost.

08-15-2006, 08:36 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. [dash bezel]i picked this one up today if you still need one i can ship it with your other parts $25.00.

08-15-2006, 08:40 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: WTB: Ignition sw assembly, parking lights, etc. circit looks good.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.