09-05-2006, 09:31 PM | #1 |
Short, Fleet, Slammed, V8 Club
Join Date: Mar 2006
Location: Kingsport,TN
Posts: 450
|
Bumper for a 71
I am wanting to put a bumper for a 67-70 on a 71. Do I just need the brackets from the 67-70 to get them to line up with the holes on the corners?
|
09-05-2006, 10:41 PM | #2 |
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: Bumper for a 71
I put my 72 truck on a 69 frame. The only thing I had to change was the outer brackets for the bumperto fit.
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
09-05-2006, 11:01 PM | #3 |
Short, Fleet, Slammed, V8 Club
Join Date: Mar 2006
Location: Kingsport,TN
Posts: 450
|
Re: Bumper for a 71
Cool that is what I needed to know. I guess I will be calling ole Tim Christian tomorrow
|
09-06-2006, 03:54 PM | #4 |
Senior Member
Join Date: Feb 2001
Location: Ridgecrest. CA, USA
Posts: 1,715
|
Re: Bumper for a 71
Are the brackets for the bumpers in our years for these trucks all different?
__________________
Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! I need another truck like I need another hole in the head! I'M IN THE MARKET...AS IT WERE! |
09-06-2006, 04:10 PM | #5 |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Bumper for a 71
For the front the outer brackets vary from a 67-70 and a 71-72. The 71-72 brackets are shorter because they have a turn signal in the bumper and the 67-70 do not.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 09-06-2006 at 04:10 PM. |
09-06-2006, 06:33 PM | #6 |
Short, Fleet, Slammed, V8 Club
Join Date: Mar 2006
Location: Kingsport,TN
Posts: 450
|
Re: Bumper for a 71
Are you sure you don't have that backwards? I tried to put a 67-70 bumper on last night and my brackets stuck out too far on the ends by about 3" per side.
|
09-06-2006, 10:47 PM | #7 |
sufficiently talented fool
Join Date: Jun 2006
Location: Forest Hill, MD
Posts: 2,231
|
Re: Bumper for a 71
The 67-70 brackets are shorter than the 71-72. When I installed my 72 bumper onto the 69 frame and brackets, the brackets were too short.
Bob
__________________
"it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board |
09-07-2006, 08:09 AM | #8 |
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Bumper for a 71
I am lysdexic, I do tend to do that a lot 71-72 are longer.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
09-07-2006, 08:38 AM | #9 |
Registered User
Join Date: Feb 2000
Location: Center City, MN, USA
Posts: 3,253
|
Re: Bumper for a 71
I believe the 71 and 72 4x4 brackets are different from the 71 and 72 2wd brackets. However I'm not sure.
__________________
'70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN |
09-09-2006, 12:28 AM | #10 |
Senior Member
Join Date: Feb 2001
Location: Ridgecrest. CA, USA
Posts: 1,715
|
Re: Bumper for a 71
Thanks guys,
This is what my problem is for both of my trucks. I can't get the bumpers right to save my life. Now I know.
__________________
Billy 1970 GMC Sierra Grande 402/TH400 (Longhorn)14 years and counting rebuild! 1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches 1970 Ford F250 Ranger 390 BB 2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires Hub Cap Freak! I need another truck like I need another hole in the head! I'M IN THE MARKET...AS IT WERE! |
09-09-2006, 07:27 AM | #11 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Bumper for a 71
I thought also that there is a difference between power steering and non-pwr steering left side bracket?
__________________
1997 GMC Sierra Ext 1965 Mustang |
09-09-2006, 07:33 AM | #12 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,475
|
Re: Bumper for a 71
I have also heard this, my outer brackets are still not on
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
Bookmarks |
|
|